VME-TB51 Transition Board for the V5C Embedded PC Features • Directly plug compatible with the V5C Embedded PC • P2 ribbon cable break-out for floppy, IDE and SCSI • Power distribution for drives • Provides P2 peripheral inter- face for drive modules • Provides both 50-pin (8-bit) and 68-pin (16-bit) SCSI interfaces • Front panel USB interfaces The VME-TB51 transition board is a companion to the V5C embedded PC for connecting remotely mounted floppy drives and hard drives. The VME-TB51 routes the V5C peripheral control signals supplied by rows a, c, d, and z of the P2 connector to ribbon cable connectors. The ribbon cable connectors are compatible with industry standard signal definitions. The VME-TB51 plugs directly onto the back of the P2 back- plane in the slot position occupied by the V5C. The extended VMEbus signals on row b are not connected to the VME-TB51. The backplane must have extended pins with shrouds to accommodate the VME-TB51 connector. The floppy drive interface is provided to a 34-pin male header connector which will accept most standard floppy cable assemblies. The Primary and Secondary IDE hard drive interfaces are provided to two 40-pin male header connectors which will accept most standard IDE cable assemblies. The VME-TB51 has both 50-Pin (8-bit) and 68-Pin (16-bit) SCSI interface connectors on the Front panel, and an additional 50-Pin Header on-board. The front Panel also contains a USB connector, P3. In installations where the operating power is directly supplied to the floppy and hard disk drives, no additional power connections are required. SINGLE BOARD COMPUTERS VME-TB51 Transition Board for the V5C Embedded PC VME-TB51 Specifcations General Model VME-TB51 Description Peripheral Transition Board Host Compatibility V5C P2 a, c, d and z rows Connectors 34-Pin Male with Shroud (Floppy Signals) (2) 40-Pin Male with Shroud (IDE HD Signals) 50-Pin SCSI (8-bit) 68-Pin SCSI (16-bit) USB Interface 10-Pin Miscellaneous Connector Electrical Power Drive Requirement Only Physical Size 3.9" x 3.2" overall Environmental Temperature 0° to 55° Celsius Inlet Air, Operating -40° to 85° Celsius, Non operating Cooling None Humidity 10 to 90% RH, Non-Condensing Shock 6G Max. Operating, 10G Max. Non-Operating VME-TB51 Ordering Number VME-TB51 P2 Adapter for Disk Drives Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Memminger Str. 14 Albuquerque, NM 87110-4316 D-86159 Augsburg, Germany Tel 505.875.0600 Fax 505.875.0400 Tel +49-821-5034-0 Fax +49-821-5034-119 Email info@sbs.com Email sales@sbs-europe.com For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2002 SBS Technologies, Inc. 20030219