GE Intelligent Platforms SCC ® 19" Starter Cages for VME and CompactPCI The 19 inch starter cages allow engineers an A hard disk and a DVD are installed. Features easy and quick start to evaluate or bench- ® • Versions for VME64 and CompactPCI EMC shielding and power supplies according mark a processor board or to develop a • 4U and 7U height, 84HP wide to CE regulations are included. The housing is specific system application. manufactured from anodized aluminum with • EMC protected Depending on the form factor of the CPU chromate surfaces on all contact areas to • 400 W or 650 W ATX power supply. Short board, the starter cages are either 4U or 7U in allow for low impedance connections. circuit and overload protected. height and 84HP in width. The cages include • Integrated DVD R/W The CPU board is not included in the starter two fans for reliable airflow and are equipped • Integrated rear I/O transition module cages. In order to give the user the most with a rear I/O transition module. flexibility, it can be ordered separately. • Integrated hard disk Depending on the starter cage, the power • Reliable cooling by two fans The operating system of choice can be supply delivers 400 W or 650 W. Output volt- • Operating temperature range 0 °C to +40 °C installed by the user. ages are +3.3 V, ±5 V and ±12 V. The power • Self locking ejector handles supply units are protected against short cir- cuit as well as against overload. • ESD clips for CPCI hot swap applications • Design compliant to IEC 60297-3 and DIN 41494-Part 5 • Chromate/anodized surface • Ready to run • MBLT, 2eVME and 2eSST protocols are supported ® SCC 19” Starter Cages for VME and CompactPCI Specifications Block Diagram Frame • Anodized and/or chromate coated aluminum • The fan plug-in unit consists of zinc plated DVD sheet metal Not for VG5, RL4, VG6 and CM6 • Dimensions are corresponding to IEC 60297-3 and DIN 41494-Part 5 Form Factor • 4U or 7U height Hard Disk • 84HP width Rear I/O Transition Module Not for RL4 and CM6 Backplanes • VME64 is designed for automatic Daisy-Chain- Principle and is compliant to IEEE 1014 Rev. D1.6 Support of MBLT, 2eVME and 2eSST protocol • CompactPCI complies to PICMG 2.0 R2.1 Backplane Power Supply Rear I/O VME64 or CPCI 400 or 650 W • Pin-outs of the transition module connectors corre- sponds to standard PC connectors (press-fit cables) Temperature Ordering Information • Operating Temperature: 0 °C to +40 °C • Storage temperature: -20 °C to +65 °C Board Starter Cage Description • Humidity (non-condensing): 5% - 95% CT9 SCC784UE05CT9R 7U, 84HP, 5x 6U CPCI slots, DVD, 400W, RoHS CP9 SCC784UE05CP9R 7U, 84HP, 5x 6U CPCI slots, DVD, 400W, RoHS Safety • EN 60950 CR9 SCC784UE05CR9R 7U, 84HP, 5x 6U CPCI slots, DVD, 400W, RoHS VP9 SCC784UM05VP9R 7U, 84HP, 5x 6U VME64 slots, DVD, 400W, RoHS Qualification • Shock: 12g/6ms, 3 axis up & down, 5 hits/direction VR9 SCC784UM05VR9R 7U, 84HP, 5x 6U VME64 slots, DVD, 400W, RoHS • Vibration: 2 grms @ 5 - 100 Hz, 30 min each axis VG5 SC-784UM05VG5R 7U, 84HP, 5x 6U VME64 slots, 400W, RoHS CL9 SCC484TB08CL9R 4U, 84HP, 8x 3U CPCI slots, DVD, 400W, RoHS RL4 SC-484TC04RL4 4U, 84HP, 4x 3U CPCI slots (system slot left), 400W CT11 SCC784UE05CT11R 7U, 84HP, 5x 6U CPCI slots, DVD, 650W, RoHS CP11 SCC784UE05CP11R 7U, 84HP, 5x 6U CPCI slots, DVD, 650W, RoHS CR11 SCC784UE05CR11R 7U, 84HP, 5x 6U CPCI slots, DVD, 650W, RoHS VP11 SCC784UM05VP11R 7U, 84HP, 5x 6U VME64 slots, DVD, 650W, RoHS VR11 SCC784UM05VR11R 7U, 84HP, 5x 6U VME64 slots, DVD, 650W, RoHS VG6 SC-784UM05VG6R 7U, 84HP, 5x 6U VME64 slots, 650W, RoHS CL11 SCC484TB05CL11R 4U, 84HP, 5x 3U CPCI slots, DVD, 650W, RoHS CC11 SCC484TB05CC11R 4U, 84HP, 5x 3U CPCI slots, DVD, 650W, RoHS CM6 SC-484TB05CM6R 4U, 84HP, 5x 3U CPCI slots, DVD, 400W, RoHS Note: All starter cages are with hard disk (except RL4 and CM6), fans and rear transition module. CompactPCI cages are with system slot on the right. CPU boards are not included, they need to be ordered separately. About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-1139A