����������������� ��������� �������������������� ���� �������� 1, 2 or 4 Independent MIL-STD-1553 Dual Redundant Channels � Multi-function Features - Simultaneous Bus Controller, 31 Remote Terminals, or Bus Monitor � Single-function Features - Bus Controller, 31 Remote Terminals, or Bus Monitor � Bus Controller - BC - BC->RT, RT->BC, RT->RT - Mode Codes, Broadcast and The QVME-1553 provides new levels of are easily configured to operate with single-shot messaging performance and flexibility for simultaneous Bus Controller, 31 - Programmable time delays MIL-STD-1553A and B Notice II on the Remote Terminals and Bus Monitor - Major/Minor frames VMEbus. Available in commercial, functionality. - Real-time conditional industrial and conductively cooled branching �������������������������� versions with one, two or four dual- - Two aperiodic messaging methods redundant channels, the QVME-1553 Single-function QVME-1553 interfaces includes advanced API (Application have all the features and functionality � Remote Terminal - RT Programming Interface) software that of the multi-function versions, but only - 1 to 31 RT's reduces application development time. one major operational mode is enabled - RT data wrapping Standard features include selectable - Multiple RT buffers at a time. Each interface can transformer or direct coupling, 1 Mbyte - 1760 startup time w/busy independently emulate either a Bus of RAM per channel, 45-bit message bit set Controller or 31 Remote Terminals or time-tagging, triggers, extensive BC & - Dynamic Bus Control Bus Monitor. RT link-list structures, error detection/ - Automatic Mode Code and injection, advanced BC functionality, status bit responses �������� automatic/manual RT Status Bit and - Programmable response time Our high-level "abstract" 1553 API is Mode Code responses plus IRIG/GPS - Hardwired RT Address provided in source code, along with selection synchronization capabilities. Optional support for VxWorks, LynxOS v4.0, IRIG-B signal Receiver/Generator, � Bus Monitor - BM Windows XP, 2000, Me, NT, 98 and 95. variable voltage outputs and - Full error detection LabVIEW, Linux and Solaris support is environmental configurations are - Multiple monitoring methods available. Contact factory for other available. The QVME-1553 Bus - 45-bit time-tagging options. To access 1553 functionality Monitors provide unparalleled error - Adv. interrupts and triggers without software development, detection and 100% monitoring of fully � BusTools/1553, Condor’s MILSTD-1553 Architecture loaded buses. bus analysis, simulation and data - BC & RT error injection/ detection logging/monitoring solution is available ������������������������� - BC & RT link list structures using our integrated PCI-MXI-2 support. QVME-1553 multi-function interfaces - 1 Mbyte RAM per channel - Onboard diagnostic bus (non-ruggedized boards only) - Ruggedized industrial and conductively cooled options - IRIG-B Receiver/Generator option 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 ��������� ����������������� �������������������� ���� �������������� ��������������������� .������������� �������� ■ ■ 6U VME card Programmable control over: ■ - Major and minor frame content and timing Standard configuration has front bezel I/O - Intermessage gap times ������������� - Response time-out and late response ■ Standard operating temperature range: 0°C to +70°C - Multiple BC retry ■ Relative humidity: 5 to 90% (non-condensing) ■ Modify messages, data or setup while card is running ■ Optional ruggedized, extended temp and conductively cooled ■ Insert aperiodic messages into a running BC list configurations ■ “Oneshot” mode for simplified BC operation ■ Conditional message sequencing based on �������� real-time message data or status ■ API - VxWorks, LynxOS v4.0, Windows XP , 2000, Me, NT, 98, ■ Selectable interrupt generation and status messages and 95 included - Full range of system conditions - Source code API library included - All detected errors ■ GUI - Optional support for BusTools/1553 GUI bus analyzer ■ Full error detection with PCI-MXI-2 (mf boards only) - Invalid word - Late response ■ Contact factory for Linux, Solaris and other OS - Bit count error - Early response ����������� - High word - No response ■ - Low word - Incorrect RT address Programmable direct or transformer coupling ■ - Inverted sync - Parity error Transition cabling for each channel ■ Extensive programmable error injection (on a per word basis) - two CJ70 jacks for 1553 ■ Synchronize BC operation to external time source - two BNC (male) for trigger in/out - two BNC (male) for IRIG in/out ������/������� ■ 4 bi-directional avionics-level dedicated discretes ■ Multiple RT simulation (up to 31 RTs) ■ On-board diagnostic bus ■ Programmable error injection (on a per word basis) �������������������������������� ■ Modify data, status words or setup while card is running ■ ■ Programmable message content (linked message buffers) Simultaneous BC, 31 RTs and BM ■ Interrupts can be generated on a per message basis upon ��������������������������������� End of Message and error conditions ■ BC or 31 RTs or BM ■ Hardware RT addressing ���������������� !� .���������� ■ 1 Mbyte per dual-redundant channel ■ Capture 100% fully loaded bus traffic with: ������"#$�%&��’�()*�+$$,���������������- - Time-tagging - Error status - Word status - Message status ■ 2 channels: 1.4A typical - RT response time ■ 4 channels: 2.2A typical ■ Interrupts can be selected by RT / SA / WC ��������� ■ Extensive filtering and triggering options ■ A16, A24, A32 addressing - By individual RT/subaddress ■ D16, D32 data transfer - Transmit, receive or broadcast mode codes ■ VXI MODID supported - Internal or external triggering - Trigger output on user specified data ����������������������� ■ Real-time bus playback with RT edit mode ■ 1, 2 or 4 dual-redundant channels ■ 45-bit, microsecond resolution timetagging ■ Variable voltage transceivers ■ IRIG/GPS synchronization ■ Optional rear panel (P2) I/O ■ Optional ruggedized, -40°C to +85°C operating 0�������1�3 year limited hardware warranty No cost library and driver upgrades temperature range ■ Optional ruggedized, VITA compliant conductive cooling (max +71°C rail temp) ■ Optional conformal coating ■ Optional IRIG-B Receiver (AM or DC/TTL) and Generator (DC/TTL) See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. QVME-1553 4/06 Tel 805.965.8000 Fax 805.963.9630