GE Fanuc Embedded Systems QPMC-1553 High Density PMC Module Features • Bus Monitor - BM GE Fanuc Embedded Systems’ QPMC-1553 pro- • 1, 2 or 4 independent MIL-STD-1553 dual - Full error detection vides new levels of performance and flexibility redundant channels - Multiple monitoring methods for MIL-STD-1553A/B Notice II on a PMC (PCI Mezzanine Card) module. Available in commercial, - 45-bit time-tagging • Multi-function features ruggedized and conductively cooled versions - Adv. interrupts and triggers - Simultaneous bus controller, 31 remote with one, two or four dual-redundant channels, terminals and bus monitor • Architecture the QPMC-1553 includes advanced API (Appli- - BC & RT error injection/detection • Single-function features cation Programming Interface) software that - FPGA architecture - Bus controller or 31 remote terminals or reduces application development time. - BC & RT link list structures bus monitor - 1 Mbyte RAM per channel • Bus Controller - BC Standard features include selectable transformer - Direct & transformer coupling or direct coupling, 1 Mbyte of RAM per channel, - BC->RT, RT->BC, RT->RT - Environmental options 45-bit message timetagging, triggers, extensive - Mode codes, broadcast and single-shot • Software support BC and RT link-list structures, error injection/ messaging detection, avionics level discretes, automatic/ - Advanced, high-level API - Programmable time delays manual RT Status Bit and Mode Code responses, - Source code included - Major/minor frames along with advanced BC functionality. An IRIG-B - BusTools Analyzer optional - Real-time conditional branching signal Receiver/Generator with GPS synchroni- - Two aperiodic messaging methods zation, variable voltage output and 66 MHz PCI • Remote Terminal - RT bus operation are optionally available. With the - RT data wrapping highest speed encoder/decoder in the industry, - Multiple RT buffers the QPMC-1553 Bus Monitors provide unparal- - Dynamic bus control leled error detection and 100% monitoring of fully - Automatic mode code and status bit responses loaded buses. - Programmable response time - RT map monitoring Multi-function Interfaces QPMC-1553 multi-function interfaces are easily configured to operate with simultaneous Bus Controller, 31 Remote Terminals and Bus Monitor functionality. Single-function Interfaces Single-function QPMC-1553 interfaces have all the features and functionality of the multi-function versions, but only one major operational mode is enabled at a time. Each interface can emulate either a Bus Controller or 31 Remote Terminals or Bus Monitor. Software GE Fanuc Embedded Systems provides our advanced 1553 API in source code, along with support for Windows XP, 2000, Me, NT, 98, 95, Linux, LynxOS, VxWorks and other operating systems. To access 1553 functionality without software development, BusTools/1553, GE Fanuc Embedded Systems’ MIL-STD-1553 bus analysis, simulation and data logging/monitoring solution is available. QPMC-1553 High Density PMC Module Remote Terminal Specifications Description • Multiple RT simulation (up to 31 RTs) • Programmable error injection (on a per word basis) Bus Controller Physical • Modify data, status words or setup while card is running • PMC Mezzanine Card (74 mm x 149 mm without bezel) • Programmable control over: • Programmable message content (linked message - Major and minor frame content and timing • Standard configuration has front bezel I/O buffers) - Intermessage gap times • Interrupts can be generated on a per message basis Environmental - Response time-out and late response upon End of Message and error conditions - Multiple BC retry • Standard operating temperature range: 0°C to +70°C • RT Map Monitoring • Relative humidity: 5 to 90% (non-condensing) • Modify messages, data or setup while card is running • Insert aperiodic messages into a running BC list • Optional ruggedized, extended temp and conductively Bus Monitor • “Oneshot“ mode for simplified BC operation cooled configurations • Capture 100% fully loaded bus traffic with: • Conditional message sequencing based on real-time - Time-tagging - Error status message data or status Software Support - Word status - Message status • API - High-level libraries with source code included for • Selectable interrupt generation and status messages - RT response time on full range of system conditions or all detected errors Windows XP, 2000, Me, NT, 98, 95, Linux, LynxOS and • Interrupts can be selected by RT/SA/WC • Full error detection VxWorks • Extensive filtering and triggering options • GUI - Optional BusTools/1553 GUI Bus Analyzer - Invalid word - Late response - By individual RT/subaddress - Bit count error - Early response (multi-function boards only) - Transmit, receive or broadcast mode codes - High word - No response - Internal or external triggering - Low word - Incorrect RT address Connections - Trigger output on user specified data - Inverted sync - Parity error • Direct or transformer coupling • Real-time bus playback with RT edit mode • I/O triggers; 18 avionics-level discretes - Manchester • 45-bit, microsecond resolution timetagging • Extensive programmable error injection (on a per • Front panel bezel or P14 I/O connections • IRIG/GPS synchronization • Transition cabling to 1553 cable jacks included on word basis) • Synchronize BC operation to external trigger source front panel configurations Multi-function Operational Modes • Simultaneous BC, 31 RTs and BM Ordering Information Single-function Operational Modes • BC or 31 RTs or BM QPMC-1553-1M MIL-STD-1553 multi-function, single dual-redundant channel, fixed voltage PMC interface Power (4 channels at 75% duty cycle) • +5 VDC @ 1.3 A (typ.) QPMC-1553-2M MIL-STD-1553 multi-function, two dual-redundant channel, fixed voltage PMC interface • +3.3 VDC @ 150 mA • 7.2 W power dissipated on board QPMC-1553-4M MIL-STD-1553 multi-function, four dual-redundant channel, fixed voltage PMC interface On-board Shared RAM QPMC-1553-1S • 1 Mbyte (per dual-redundant channel) MIL-STD-1553 single-function, single dual-redundant channel, fixed voltage PMC interface QPMC-1553-2S PCI Signal Compatibility MIL-STD-1553 single-function, two dual-redundant channel, fixed voltage PMC interface • Universal (5V or 3.3V) QPMC-1553-4S • Optional 66 MHz PCI bus operation MIL-STD-1553 single-function, four dual-redundant channel, fixed voltage PMC interface Contact Factory for Conduction Cooled, Rugged and Other Configurations Configuration Options • 1, 2 or 4 dual-redundant channels • Optional P14 I/O • Optional ruggedized, -40°C to +85°C operating temperature range • Optional ruggedized, VITA compliant conductive cooling (max +71°C rail temp) • Optional conformal coating • Optional IRIG-B Receiver (AM or DC/TTL) and • Generator (DC/TTL) About GE Fanuc Embedded Systems • Available mounted on a PCI, 3U/6U CompactPCI GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide carrier board range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.07 GFA-750