GE Fanuc Embedded Systems QPM-1553 High Density PMC Module GE Fanuc Embedded Systems’ QPM-1553 is the Features Multi-function Interfaces latest generation of performance and flexibility • 1, 2 or 4 dual-redundant MIL-STD-1553A/B QPM-1553 multi-function interfaces are easily for MIL-STD-1553A/B Notice II on a PMC (PCI Notice II channels configured to operate with simultaneous Bus Mezzanine Card) module. Available in commercial, Controller, 31 Remote Terminals and Bus • 100% software and hardware compatibility ruggedized and conductively cooled versions Monitor functionality. with QPMC-1553 with one, two or four dual-redundant channels, – Less heat the QPM-1553 includes advanced API (Appli- Single-function Interfaces – Less power cation Programming Interface) software that Single-function QPM-1553 interfaces have all the reduces application development time. Standard features and functionality of the multi-function – Higher MTBF features include selectable transformer or direct versions, but only one major operational mode • Simultaneous Bus Controller, 31 Remote Termi- coupling, 66 MHz, PCI bus support, 1 Mbyte of is enabled at a time. Each interface can emulate nals and Bus Monitor RAM per channel, 45-bit message timetagging, either a Bus Controller or 31 Remote Terminals or • High-level API for Windows XP, 2000, Me, NT, triggers, extensive BC & RT link-list structures, a Bus Monitor. 98, 95, VxWorks, Linux, Integrity, LynxOS and error injection/detection, avionics level discretes, Solaris included automatic/manual RT Status Bit and Mode Code Software responses, along with advanced BC functional- • Multi-function and single-function versions GE Fanuc Embedded Systems provides our ity. IRIG-B signal Receiver/Generator with GPS advanced 1553 API in source code, along with • Supports 66/33 MHz PCI bus synchronization, variable voltage output and support for Windows XP, 2000, Me, NT, 98, 95, Vx- • Front panel or rear (P14) I/O available RS-485 differential discretes are optionally avail- Works, Linux, Integrity, LynxOS, and other operat- • Optional IRIG-B receiver/generator able. With the highest speed encoder/decoder in ing systems. To access 1553 functionality without the industry, the QPM-1553 Bus Monitors provide software development, BusTools/1553, GE Fanuc • 45-bit, microsecond time-tagging unparalleled error detection and 100% monitoring Embedded Systems’ MIL-STD-1553 bus analysis, • Complete message programmability of fully loaded buses. simulation and data logging/monitoring solution • Flexible message status/interupt generation is available. • I/O triggering and error injection/detection • Transition cabling to 1553 cable jacks included • Optional extended temperature, variable volt- age output, conductive cooling and differential discretes QPM-1553 High Density PMC Module Remote Terminal Specifications Descriptions • Multiple RT simulation (up to 31 RTs) • Programmable error injection (on a per word basis) Physical Bus Controller • Modify data, status words or setup while card is running • PMC Mezzanine Card (74mm x 149 mm without bezel) • Programmable control over: • Standard configuration has front panel I/O • Programmable message content (linked – Major and minor frame content and timing message buffers) – Intermessage gap times Environmental • Selectable interrupts upon multiple conditions – Response time-out and late response • Standard operating temperature range: 0 to +70° C • RT Map Monitoring • Modify messages, data or setup while card is running • Relative humidity: 5 to 90% (non-condensing) • Insert aperiodic messages into a running BC list • Optional ruggedized, extended temp and conductively Bus Monitor • “Oneshot“ mode for simplified BC operation cooled configurations • Capture 100% fully loaded bus traffic with: • Conditional message sequencing based on real-time – Time-tagging – Error status message data or status Software Support – Word status – Message status • Selectable interrupt generation and status messages • API – High-level libraries with source code included for • Interrupts can be selected by RT / SA / WC on full range of system conditions or all detected errors Windows XP, 2000, Me, NT, 98, 95, VxWorks, Linux, • Extensive filtering and triggering options • Full error detection Integrity, LynxOS and Solaris – By individual RT/subaddress • GUI – Optional BusTools/1553 GUI Bus Analysis, Simu- – Invalid word – Late response – Transmit, receive or broadcast mode codes lation & Data Logging software (multi-function – Bit count error – Early response – Internal or external triggering boards only) – High word – No response – Trigger output on user specified data – Low word – Incorrect RT address Connections • Real-time bus playback with RT edit mode – Inverted sync – Parity error • Direct or transformer coupling • 45-bit, microsecond resolution timetagging – Manchester • I/O triggers; 18 avionics-level discretes • IRIG/GPS synchronization • Extensive programmable error injection (on a per • Front panel or P14 I/O connections word basis) • Transition cabling to 1553 cable jacks included • Synchronize BC operation to external time source on front panel configurations • Optional RS-485 differential discretes Multi-function Operational Modes • Simultaneous BC, 31 RTs and BM Ordering Information Single-function Operational Modes • BC or 31 RTs or BM QPM-1553-1S: MIL-STD-1553 single-function, single dual-redundant channel, fixed voltage PMC interface QPM-1553-2S: MIL-STD-1553 single-function, two dual-redundant channel, fixed voltage PMC interface Power (4 channels at 75% duty cycle) • +5 VDC @ 1.01 A (typ.) QPM-1553-4S: MIL-STD-1553 single-function, four dual-redundant channel, fixed voltage PMC interface • +3.3 VDC @ 230mA (typ.) QPM-1553-1M: MIL-STD-1553 multi-function, single dual-redundant channel, fixed voltage PMC interface • 5.9 W power dissipated on board QPM-1553-2M: MIL-STD-1553 multi-function, two dual-redundant channel, fixed voltage PMC interface On-board Shared RAM QPM-1553-4M: MIL-STD-1553 multi-function, four dual-redundant channel, fixed voltage PMC interface • 1 Mbyte (per dual-redundant channel) PCI Signal Compatibility • Universal (5V or 3.3V) • Supports 66 or 33 MHz PCI bus operation Optional Configurations • 1, 2 or 4 dual-redundant channels • Optional P14 I/O • Optional ruggedized, -40 to +85° C operating temperature range • Optional ruggedized, VITA compliant conductive cooling (max +71° C rail temp) • Optional conformal coating • Optional IRIG-B Receiver (AM or DC/TTL) and Generator (DC/TTL) About GE Fanuc Embedded Systems GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 06.07 GFA-940