GE INTELLIGENT PLATFORMS PMC-1550-SY
Specifications
Connection
Direct or transformer coupling
Input and output triggers
Jumper selectable front panel or P14 I/O connections
Transition cabling to 1553 cable jacks included
Dimension-Single PMC card (74mm x 149mm)
Mechanical
Multi-function Operational Modes
Simultaneous BC, 31 RTs and BM
On-board Shared RAM
1 Mbyte (per dual-redundant channel)
Operating temperature range
0°C to +70°C
PCI Signal Compatibity
5V Signaling
Physical
Extended temperature range available
Power(50% duty cycle)
+5 VDC: 1.4 A
Single-function Operational Modes
BC or 31 RTs or BM
Software API
Includes high-level API libraries for Windows XP, 2000, Me, NT, 98, 95, VxWorks, Linux, LabWindows/CVI and Visual Basic - Source code API library provided
Software GUI
Optional BusTools/1553 GUI bus analyzer
Software LabVIEW
Support optional
Warranty
(3 year limited hardware warranty
Features
- Architecture:BC & RT error injection/, detection, DYNAMIC architecture, BC & RT link list structures, 1 Mbyte RAM per channel, Direct & transformer coupling, Onboard diagnostic bus, Environmental opti
- Bus Controller BC: BC->RT, RT->BC, RT->RT, Mode Codes, Broadcast and single-shot messaging, Programmable time delays, Major/Minor frames, Real-time conditional branching, Two aperiodic messaging, meth
- Bus Monitor BM: Full error detection, Multiple monitoring methods, 45-bit time-tagging, Adv. interrupts and triggers
- Multi-function Features Simultaneous Bus Controller, 31 Remote Terminals, or Bus Monitor
- Remote Terminal RT: RT data wrapping, Multiple RT buffers, Dynamic Bus Control, Automatic Mode Code and, status bit responses, Programmable response time
- Single-function Features Bus Controller, 31 Remote
- Software Support:Advanced, high-level API, Source code included, BusTools Analyzer supported
- Terminals, or Bus Monitor
Datasheet
Ge intelligent platforms-PMC-1553-Data sheet -5314237891.pdf
120 KiB
Extracted Text
����������������� �������� ����������������� ���� �������� � Multi-function Features - Simultaneous Bus Controller, 31 Remote Terminals, or Bus Monitor � Single-function Features - Bus Controller, 31 Remote Terminals, or Bus Monitor � Bus Controller - BC - BC->RT, RT->BC, RT->RT - Mode Codes, Broadcast and single-shot messaging - Programmable time delays - Major/Minor frames The PMC-1553 provides the highest ������������������������� - Real-time conditional level of performance and flexibility for The PMC-1553-S is a single-function branching MIL-STD-1553A/B in the PMC form interface with all the features and - Two aperiodic messaging factor. The PMC-1553 is integrated functionality of the multi-function methods with powerful software that reduces version, but only one major operational development time. All 1553 databus � Remote Terminal - RT mode is enabled at a time. This functionality is supported from our - RT data wrapping interface functions as either a Bus advanced API (Application Programming - Multiple RT buffers Controller or 31 Remote Terminals or Interface). Standard features include - Dynamic Bus Control Bus Monitor. real-time bus playback (with ability to - Automatic Mode Code and edit out RTs), aperiodic message status bit responses - Programmable response time insertion, error injection/detection, �������� conditional BC branching, 45-bit � Bus Monitor - BM Included with the PMC-1553 is timetags and “Oneshot” BC operation. - Full error detection Condor’s easy-to-use, flexible, high-level Provides host software synchronization - Multiple monitoring methods API which supports up to 10 to pulses from external timing sources - 45-bit time-tagging independent MIL-STD-1553 channels. (IRIG, GPS, etc). The Bus Monitor - Adv. interrupts and triggers Source code and Windows XP, 2000, mode provides 100% bus monitoring of � Architecture Me, NT, 98, 95, VxWorks, Linux, a fully loaded 1553 bus. - BC & RT error injection/ LabWindows/CVI and Visual Basic detection support is provided. LabVIEW support, - DYNAMIC architecture ������������������������ Solaris support and BusTools/1553, - BC & RT link list structures Condor’s GUI bus analysis and The PMC-1553-M provides a - 1 Mbyte RAM per channel simulation solution for 1553, are multifunction 1553 interface that can - Direct & transformer coupling optionally available. Condor’s high operate simultaneously as a BC, up to - Onboard diagnostic bus performance and intuitive software 31 RTs and as a BM. It can completely - Environmental options solutions provide complete and emulate an entire dual-redundant � simplified access to MIL-STD-1553 Software Support 1553 channel internally, eliminating functionality for development, - Advanced, high-level API the need for external hardware to - Source code included integration, test, embedded and simulate missing nodes. - BusTools Analyzer supported maintenance applications. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 �������� ����������������� ����������������� ���� �������������� ��������������������� �������� )������������� ■ Single PMC card (74mm x 149mm) ■ Programmable control over: - Major and minor frame content and timing ������������� - Intermessage gap times ■ Operating temperature range: 0°C to +70°C - Response time-out and late response ■ Extended temperature range available ■ Modify messages, data or setup while card is running ■ �������� Insert aperiodic messages into a running BC list ■ “Oneshot“ mode for simplified BC operation ■ API - Includes high-level API libraries for Windows XP , 2000, ■ Conditional message sequencing based on real-time Me, NT, 98, 95, VxWorks, Linux, LabWindows/CVI and message data or status Visual Basic ■ Selectable interrupt generation and status messages - Source code API library provided - Full range of system conditions ■ GUI - Optional BusTools/1553 GUI bus analyzer - All detected errors ■ LabVIEW - Support optional ■ Full error detection ����������� - Invalid word - Late response ■ Direct or transformer coupling - Bit count error - Early response ■ Input and output triggers - High word - No response ■ Jumper selectable front panel or P14 I/O connections - Low word - Incorrect RT address ■ Transition cabling to 1553 cable jacks included - Inverted sync - Parity error - Manchester �������������������������������� ■ Extensive programmable error injections (on a per ■ Simultaneous BC, 31 RTs and BM word basis) ■ ��������������������������������� Synchronize BC operation to external time source ■ BC or 31 RTs or BM $������*������� ■ �������� !�����������" Multiple RT simulation (up to 31 RTs) ■ Programmable message content (linked message buffers) ■ +5 VDC: 1.4 A ■ Modify data, status words or setup while card is running ���#������������$%� ■ Programmable error injection (on a per word basis) ■ ■ 1 Mbyte (per dual-redundant channel) Interrupts can be generated on a per message basis upon End of Message and error conditions ��&���������������#����� )���������� ■ 5V Signaling ■ Capture 100% fully loaded bus traffic with: ’�������(�3 year limited hardware warranty - Time-tagging - Error status - Word status - Message status ��������� � �������������� - RT response time ���������� MIL-STD-1553 multi-function PMC Module ■ Interrupts can be selected by RT / SA / WC ���������� MIL-STD-1553 single-function PMC Module ■ Extensive filtering and triggering options ��������� Ruggedized, temperature screened option - By individual RT/subaddress (-37°C to +85°C) - Transmit, receive or broadcast mode codes ����������������� - Internal or external triggering ������������� MIL-STD-1553 Bus Analysis, Simulation & - Trigger output on user specified data Data Logging software for Windows (multi- ■ Real-time bus playback with RT edit mode function boards only) ■ 45-bit, microsecond resolution timetagging ������� LabVIEW support for PMC-1553 �������� VxWorks support for PMC-1553 ■ Host software synchronization to external timing sources See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. PMC-1553 4/06 Tel 805.965.8000 Fax 805.963.9630
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PMC-1550-SY have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
GE INTELLIGENT PLATFORMS P1000-PCM2-8, ARINC 429 PASS-1000 Eight Channel ARINC 429 to PCMCIA interfa...
GE INTELLIGENT PLATFORMS P-10SF, Mezzanine Cards PMC Interface for 10 Mbps 1553, Bus Controller, Bus...
GE intelligent platforms P-10SF-1, Mezzanine Cards PMC card with one dual-redundant channel of 10 Mb...
GE intelligent platforms P-10SF-2, Mezzanine Cards PMC card with two dual-redundant channels of 10 M...
GE intelligent platforms P32-PCM2-4T4R, ARINC 429 PASS-3200 Eight Channel ARINC 429 to PCMCIA interf...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods