SU40P SERIES 40 WATT SWITCHING POWER SUPPLY LOW PROFILE GENERAL SPECIFICATIONS Switching Frequency: 36kHz ± 5kHz Efficiency: 70% min. on single output models with Vo > 15V, 65% minimum on all others Hold-up Time: 10mS min. at 110 VAC Line Regulation: ± 0.5% max. at full load Inrush Current: 15 amps at 115 VAC (at 25°C cold start) 30 amps at 230 VAC Withstand Voltage: 3000 VAC input to output UNIVERSAL INPUT 1500 VAC input to ground 500 VAC output to ground FEATURES MTBF (25°C ambient): 600,000 hours min. full load EMI Requirements: In compliance with CISPR 22 (EN ♦ 3.00" x 5.00" x 1.18" compact size 55022) Class B and FCC Class B ♦ 1.2" in height for low profile version Safety Requirements: Meets or exceeds: ♦ Wide input range 85 to 264 VAC UL 1950 CSA C22.2 No. 950 ♦ Input surge current protection EN 60950/IEC 950 ♦ Overvoltage & overcurrent protection ♦ Open PCB construction, L-bracket or box optional OUTPUT SPECIFICATIONS ♦ 100% burn-in ♦ Recognized or certified by UL/CSA/TÜV & CE marked to Output Voltage/Current: See Rating Chart LVD Total Output Power: 40 watts maximum Ripple and Noise: 1% peak to peak max. DESCRIPTION Overvoltage Protection: Provided on output #1 only; set at 112-132% of its nominal output The SU40P series of compact, open PCB constructed, AC-DC voltage switching power supplies are capable of delivering 40 watts of Overcurrent Protection: All outputs protected to short circuit continuous output power. They operate at 85 to 264 VAC input conditions voltage without the need of voltage selection. They are ideally Temp. Coefficient: All outputs, ± 0.04%/°C max. suited for use in today’s CRT terminals, disk drive systems, small Transient Response: Maximum excursion of 4% or better microprocessor based systems and mixed logic environments. All on all models, recovering to 1% of models meet the safety requirements of UL, CSA and IEC. final value within 500µs after a 25% step load change INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input Voltage: 85 to 264 VAC Operating Temperature: 0°C to +70°C Input Frequency: 47 to 63Hz Storage Temperature: -40°C to +85°C Input Current: 1.20A (rms) for 115 VAC Relative Humidity: 5% to 95% non-condensing 0.70A (rms) for 230 VAC Derating: Derate from 100% at +50°C linearly to Leakage Current: 0.47mA max. at 110 VAC, 60Hz 50% at +70°C 0.85mA max. at 230 VAC, 50Hz 23181 Antonio Parkway, Rancho Santa Margarita CA 92688 U.S.A. � Telephone: (949) 766-9240 � Fax: (949) 766-9241 E-mail: salesusa@fspgroup.com � Website: www.fspgroup.com UNIVERSAL INPUT SU40P SERIES Output #1 Output #2 Output #3 Max. Model Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Power SU40P10L 5V 0A 8.0A 2% (N/A) (N/A) 40W SU40P12L 12V 0A 3.5A 1% (N/A) (N/A) 40W SU40P13L 15V 0A 3.0A 1% (N/A) (N/A) 40W SU40P14L 24V 0A 2.0A 1% (N/A) (N/A) 40W SU40P18L 48V 0A 0.9A 1% (N/A) (N/A) 40W SU40P23L +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% (N/A) 40W SU40P24L +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% (N/A) 40W SU40P25L +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% (N/A) 40W SU40P30L +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -5V 0.05A 0.3A 10% 40W SU40P31L +5V 0.5A 3.0A 3% +12V 0.2A 2A 5% -12V 0.05A 0.3A 10% 40W SU40P32L +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -15V 0.05A 0.3A 10% 40W SU40P33L +5V 0.5A 3.0A 3% +15V 0.2A 2A 5% -12V 0.05A 0.3A 10% 40W SU40P39L +5V 0.5A 3.0A 3% +24V 0.1A 1A 5% -12V 0.05A 0.3A 10% 40W Notes: (1) All multi-output units may be operated at no load without damage; no load output voltage tolerance increases to 10%. (2) Safety agency approvals are for the above listed models in PCB format. To order a model with a metallic L-bracket or box, add suffix "B" for L-bracket format or "C" for enclosed format to the model number e.g., SU40P14LC. MECHANICAL SPECIFICATIONS Notes: 1. Dimensions shown in inch (mm) 2. Tolerance 0.02 (0.5) maximum 3. Input connector mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal 4. Output connector mates with Molex housing 09-50- 3061 and Molex 2878 series crimp terminal 5. Weight: 230 grams (PCB format) 6. It is strongly recommended to connect two “*” marked mounting holes to system chassis through metallic stand-offs. This helps reduce output noise greatly. PIN CHART PIN 1 2 3 4 5 6 MODEL SU40P10L SU40P12L SU40P13L SU40P14L Output #1 Output #1 Output #1 Return Return Return SU40P18L SU40P23L SU40P24L Common Common Output #2 Output #1 Output #1 N.C. SU40P25L Return Return SU40P30L SU40P31L Common Common SU40P32L SU40P33L Output #2 Output #1 Output #1 Output #3 Return Return SU40P39L Note: All data are subject to change without notice 23181 Antonio Parkway, Rancho Santa Margarita CA 92688 U.S.A. � Telephone: (949) 766-9240 � Fax: (949) 766-9241 E-mail: salesusa@fspgroup.com � Website: www.fspgroup.com