SU65P SERIES 65 WATT SWITCHING POWER SUPPLIES GENERAL SPECIFICATIONS Switching Frequency: 32kHz ± 5kHz Efficiency: 70% min. on single output models with Vo > 12V, 65% minimum on all others Hold-up Time: 10mS min. at 110 VAC Line Regulation: ± 0.5% max. at full load Inrush Current: 15 amps at 115 VAC (at 25°C cold start) 30 amps at 230 VAC Withstand Voltage: 3000 VAC input to output 1500 VAC input to ground 500 VAC output to ground MTBF (25°C ambient): 400,000 hours min. full load EMI Requirements: In compliance with CISPR 22 (EN UNIVERSAL INPUT 55022) Class B and FCC Class B Safety Requirements: Meets or exceeds: FEATURES UL 1950 ♦ Recognized or certified by UL/CSA/TÜV & CE marked to CSA C22.2 No. 950 LVD EN 60950/IEC 950 ♦ Small size, light weight OUTPUT SPECIFICATIONS ♦ Wide input range 85 to 264 VAC ♦ Input surge current protection Output Voltage/Current: See Rating Chart ♦ Overvoltage & overcurrent protection Total Output Power: 65 watts maximum ♦ Open PCB construction, L-bracket or box optional Ripple and Noise: 1% peak to peak max. ♦ 100% burn-in Overvoltage Protection: Provided on output #1 only; set at 112-132% of its nominal output DESCRIPTION voltage Overcurrent Protection: All outputs protected to short circuit The SU65P series of compact, open PCB constructed, AC-DC conditions switching power supplies are capable of delivering 50 to 65 watts Temp. Coefficient: All outputs, ± 0.04%/°C max. of continuous output power. They operate at 85 to 264 VAC Transient Response: Maximum excursion of 4% or better input voltage without the need of voltage selection. They are on all models, recovering to 1% of ideally suited for use in today’s CRT terminals, disk drive systems, final value within 500µs after a 25% small microprocessor based systems, portable equipment and step load change many other applications. All models meet the safety requirements of UL, CSA and IEC. ENVIRONMENTAL SPECIFICATIONS Operating Temperature: 0°C to +70°C INPUT SPECIFICATIONS Storage Temperature: -40°C to +85°C Relative Humidity: 5% to 95% non-condensing Input Voltage: 85 to 264 VAC Derating: Derate from 100% at +50°C linearly Input Frequency: 47 to 63Hz to 50% at +70°C Input Current: 1.60A (rms) for 115 VAC 1.00A (rms) for 230 VAC Leakage Current: 0.47mA max. at 110 VAC, 60Hz 0.85mA max. at 230 VAC, 50Hz 23181 Antonio Parkway, Rancho Santa Margarita CA 92688 U.S.A. X Telephone: (949) 766-9240 X Fax: (949) 766-9241 E-mail: salesusa@fspgroup.com X Website: www.fspgroup.com UNIVERSAL INPUT SU65P SERIES Output #1 Output #2 Output #3 Output #4 Max. Model Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Power SU65P10 5V 0A 10A 2% (N/A) (N/A) (N/A) 50W SU65P12 12V 0A 5.5A 1% (N/A) (N/A) (N/A) 65W SU65P13 15V 0A 4.5A 1% (N/A) (N/A) (N/A) 65W SU65P14 24V 0A 3.0A 1% (N/A) (N/A) (N/A) 65W SU65P23 +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% (N/A) (N/A) 65W SU65P24 +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% (N/A) (N/A) 65W SU65P25 +5V 1A 6.0A 3% +24V 0.3A 2.0A 5% (N/A) (N/A) 65W SU65P30 +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -5V 0.1A 0.5A 10% (N/A) 65W SU65P31 +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% (N/A) 65W SU65P32 +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% -15V 0.1A 0.5A 10% (N/A) 65W SU65P33 +5V 1A 6.0A 3% +15V 0.4A 3.0A 5% -12V 0.1A 0.5A 10% (N/A) 65W SU65P35-1 +5V 1A 6.0A 3% +24V 0.3A 1.2A 5% -24V 0.2A 1.0A 10% (N/A) 65W SU65P39 +5V 1A 6.0A 3% +24V 0.3A 2.0A 5% -12V 0.1A 0.5A 10% (N/A) 65W SU65P40 +5V 1A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% -5V 0.1A 0.50A 10% 65W SU65P45-1 +5V 1A 6.0A 3% +15V 0.2A 1.0A 5% +25V 0.1A 0.75A 10% -12V 0.1A 1.0A 10% 65W Notes: (1) All multi-output units may be operated at no load without damage; no load output voltage tolerance increases to 10%. (2) Safety agency approvals are for the above listed models in PCB format. To order a model with a metallic L-bracket or box, add suffix "B" for L-bracket format or "C" for enclosed format to the model number e.g. SU65P25C. MECHANICAL SPECIFICATIONS Notes: 1. Dimensions shown in inch (mm) 2. Tolerance 0.02 (0.5) maximum 3. Input connector mates with Molex housing 09- 50-3031 and Molex 2878 series crimp terminal 4. Output connector mates with Molex housing 09-50-3081 and Molex 2878 series crimp terminal 5. Weight: 400 grams (PCB format) 6. The “*” marked mounting hole is for system grounding through a metallic stand-off to the system chassis. PIN CHART PIN 1 2 3 4 5 6 7 8 MODEL SU65P10 SU65P12 Output #1 Output #1 Output #1 Output #1 Return Return Return Return SU65P13 SU65P14 SU65P23 Common Common SU65P24 Output #1 Output #1 Output #2 Output #2 N.C. N.C. SU65P25 Return Return SU65P30 SU65P31 Common Common SU65P32 SU65P33 Output #1 Output #1 Output #2 Output #2 Output #3 N.C. Return Return SU65P35-1 SU65P39 Common Common SU65P40 SU65P45-1 Output #1 Output #1 Output #2 Output #2 Output #3 Output #4 Return Return Note: All data are subject to change without notice 23181 Antonio Parkway, Rancho Santa Margarita CA 92688 U.S.A. X Telephone: (949) 766-9240 X Fax: (949) 766-9241 E-mail: salesusa@fspgroup.com X Website: www.fspgroup.com