FORCE COMPUTERS CPCI-680
Specifications
Board Type
CompactPCI
CompactPCI Interface
“Universal” PCI-to-PCI bridge—system slot and peripheral slot—32-bit, 33MHz
Compliance
PICMG 2.16 compatible via rear transition board
Dimensions
160.00mm x 233.35mm
Ethernet
Up to three Fast Ethernet interfaces via Intel 82559
Flash Disk
Optional onboard IDE Flash Disk—via CompactFlash interface for Type II cards
L2 Cache
1 or 2MBytes L2 Cache running at half processor speed
Memory
Up to 256MBytes onboard ECC-protected SDRAM (option to 1GByte via memory module)
Power Requirements
PowerCoreCPCI-680/256-450-L1-16: +5V 1.7 A, +3.3V 1.8 A
Processor
IBM PowerPC 750
PowerPC 750 or PowerPC G4 7400 processor, at 450/500MHz or 400MHz
Real-Time Clock
MK48T58, 8KByte NVRAM real-time clock
SCSI
Optional Fast Wide SCSI-2 via pre-installed SSIO PMC module
Serial
Two 16C550, RS-232 serial interfaces on front panel (option for four additional interfaces)
Watchdog Timer
Yes
Features
- Fast Wide SCSI-2 interface
- Force’s Sentinel “universal mode” PCI to PCI bridge enables SBCs to switch between system and peripheral slot functionality
- Full Hot Swap support for CompactPCI
- Ideal for Linux or real-time operating systems (RTOSes)
- Low-power consumption
- PowerPC 750 or PowerPC G4 7400 processor up to 1GByte high-speed memory for “supercomputing” performance
- Single-slot solution
- Up to three independent Fast Ethernet interfaces
- Up to two PMC slots
Datasheet
Extracted Text
‘Universal-Mode’ PowerCore CPCI-680 ‘Supercomputer’ SBC DA T ASHEET PowerCore CPCI-680 ‘Universal Mode’ Single Board Computer The PowerCore CPCI-680 single board computer offers “supercomputer” performance in system- and peripheral-slot � Telecommunications operating modes. � Datacommunications Features Highlights ™ � Force’s Sentinel “universal-mode” PCI- The Force PowerCore CPCI-680 ® to-PCI bridge—enables SBCs to switch CompactPCI (6U) single board computer � Industrial Control between system- and peripheral-slot brings new levels of flexibility and power functionality to embedded telecommunications, data communications and industrial applica- � PowerPC 750 or PowerPC G4 7400 � Government tions. The first product based on Force’s processor/up to 1GByte high-speed ™ pioneering Sentinel “universal” PCI-to- memory for “supercomputing” perfor- PCI bridge technology, the PowerCore mance CPCI-680 can function as a high-perfor- ™ � Ideal for Linux or real-time operating mance system controller or an intelligent systems (RTOSes) peripheral card, without any need for hard- � Low-power consumption ware or software reconfiguration when switching between operating modes. This, � Up to three independent Fast Ethernet ™ combined with its advanced PowerPC interfaces 750 or PowerPC G4 7400 processor and � Fast Wide SCSI-2 interface broad array of interfaces, makes the � Full Hot Swap support for CompactPCI PowerCore CPCI-680 an ideal choice for � Up to two PMC slots configuring fast-to-market, highly reliable multicomputing platforms. � Single-slot solution www.forcecomputers.com ‘Universal-Mode’ PowerCore CPCI-680 ‘Supercomputer’ SBC SBC Base Board Rear T ransition Board Front Panel Front Panel Connectors: Connectors: ETH #2 ETH #2 PowerPC 2MByte J5 750 or Level 2 PMC #2 I/O Serial #1-2 G4 Cache SCSI Serial 512 #5-6 Serial #3-4 64-bit/100MHz PPC MByte 256 SDRAM MByte 128/256 PPC-to- SDRAM 32-bit MByte PCI 33MHz SDRAM Bridge PCI SCSI ETH #1 1 Mbyte 16 Mbyte Serial #1-2 Booth Flash User Flash SCSI J3 Serial #3-6 ETH #2 IDE Flash Disk PMC #1 I/O or PMC #2 Reset Reset + Abort ETH #3 Status LEDs FastWide PMC #1 PMC #2 SCSI-2 & J2 ETH LEDs I/O I/O Serial #3-6 SENTINEL or PMC #1 P2P Breakout ETH #1 Bridge CPCI ISA Bus Bridge Serial #1-2 J1 RTC Serial #1-2 NVRAM CIO System Slot LED Watchdog Hot Swap LED ‘Universal-mode’ CompactPCI Flexible configurations single board computer solution � Up to two PMC slots � Dual functionality: system slot and/or � Up to three onboard independent Fast peripheral slot capabilities Ethernet interfaces � Based on Force Sentinel “universal-mode” � Two onboard serial interfaces PCI-to-PCI bridge technology � Optional interfaces (occupies one � “Zero” hardware or software impact PMC slot) when switching operating modes � Fast Wide SCSI-2 interface for � Ready-made building block for multipro- mass storage cessor systems � Four additional serial interfaces � Single-slot solution—even fully configured � Onboard CompactFlash interface for Type II cards High-performance embedded comput- ing platform � Optimum computing performance in a single 6U CompactPCI slot � PowerPC 750 or PowerPC G4 7400 processor, at 450/500MHz or 400MHz � Up to 1GByte SDRAM via memory modules � Built-in buffers in Sentinel allow fast data transfers across the widely deployed 32-bit CompactPCI bus � Low-power consumption for embedded applications � OS flexibility—broad Linux and real-time operating system (RTOS) support ‘Universal-Mode’ PowerCore CPCI-680 ‘Supercomputer’ SBC Broad expansion and I/O flexibility in a Enabling power of Force’s Sentinel single slot ‘universal’ PPB The Force PowerCore CPCI-680 is a powerful In addition to its versatility and high perfor- and versatile CompactPCI single board com- mance, the PowerCore CPCI-680 provides de- puter (SBC) based on Force’s revolutionary velopers with broad expansion capabilities and Sentinel “universal-mode” PCI-to-PCI bridge a wide range of interface options. Up to two (PPB). Intelligent Sentinel technology enables PMC slots are available for expansion, and an the PowerCore CPCI-680 to function as either optional Fast Wide SCSI-2 interface enables a system controller (in a CompactPCI system high-speed connection to mass storage. There slot) or as an intelligent peripheral card (in a are also up to three independent Fast Ethernet CompactPCI peripheral slot). The Sentinel PPB interfaces and two serial interfaces (expandable completely eliminates the need for either hard- to a total of six serial interfaces) for maximum ware or software reconfigurations when the I/O flexibility. PowerCore CPCI-680 switches operating The optional onboard socket for Type II modes. CompactFlash cards allows easy and flexible By using the Sentinel PPB technology, develop- expansion via removable cards that can be ei- ers can simplify and accelerate the design of ther solid-state flash memory cards or disk- based media. multi-processor systems based on cost-effective, industry-standard components. Yet even when fully configured with a com- plete set of interfaces and its maximum 1GByte Powerful real-time computing—future- memory, the PowerCore CPCI-680 remains a proofed and backward compatible single-slot solution. The PowerCore CPCI-680 brings maximum real-time computing performance in a single slot to both system controller and intelligent peripheral modes. The CPCI-680 is built around the PowerPC 750 or PowerPC G4 7400 processor with their ultra-high speed and ex- tremely low-power consumption characteris- tics. The use of the PowerPC 750 or PowerPC G4 7400, together with up to 1GByte high- speed memory and Sentinel’s on-chip buffers for elevated system performance, enables the CPCI-680 to address the most demanding ap- plications. The CPCI-680 is also backward compatible with earlier members of the Force PowerPC-based PowerCore family of SBCs. Developers can take advantage of the CPCI- 680’s power and performance when running major real-time operating systems (RTOSes) or when deploying applications based on the low- ™ cost, open-source Linux operating system. RTOSes supported by the CPCI-680 include ® ™ VxWorks and LynxOS . ‘Universal-Mode’ PowerCore CPCI-680 ‘Supercomputer’ SBC S PECIFICA TIONS Processor/memory Other features � PowerPC 750 or PowerPC G4 7400 � MK48T58, 8KByte NVRAM real-time clock processor, at 450/500MHz or 400MHz � Z-CIO 8536, 3x16-bit timers, 500ns � Up to 256MBytes onboard ECC-protected resolution SDRAM (option to 1GByte via memory � Watchdog timer module) � Reset and abort switches, status LEDs, Hot � 1 or 2MBytes L2 Cache running at half Swap LED processor speed Power requirements � Up to 16MBytes onboard programmable User Flash PowerCoreCPCI-680/256-450-L1-16 � +5V 1.7 A, +3.3V 1.8 A � 1MByte Boot Flash Environmentals I/O capabilities Operating temperature � PICMG 2.16 compatible via rear transition 0ºC to 55ºC with forced air-cooling board Storage temperature � Up to 2 PMC slots with rear-facing I/O -40ºC to +85ºC � Optional onboard IDE Flash Disk—via Relative humidity CompactFlash interface for Type II cards 5% to 95% non-condensing � Optional Fast Wide SCSI-2 via pre-installed SSIO PMC module Board size � Up to three Fast Ethernet interfaces via Single-slot 6U CompactPCI 82559 160.00mm x 233.35mm � Two 16C550, RS-232 serial interfaces on front panel (option for four additional interfaces) CompactPCI interface � “Universal” PCI-to-PCI bridge—system slot and peripheral slot—32-bit, 33MHz Universal PCI-to-PCI Bridge www.forcecomputers.com Force Computers is the leading designer and worldwide supplier of standard and custom systems, board-level platforms and services for the embedded market. THE AMERICAS EUROPE ASIA Corporate Headquarters European Headquarters Japanese Headquarters Force Computers Inc. Force Computers GmbH Force Computers Japan K.K. 5799 Fontanoso Way Prof.-Messerschmitt-Str. 1 Shiba Daimon MF Building 4F San Jose, CA 95138-1015 D-85579 Neubiberg/München 2-1-16 Shiba Daimon Tel.: (408) 369-6000 Tel.: +49 (089) 608 14-0 Minato-ku, Tokyo 105-0012 Fax: (408) 371-3382 Fax: +49 (089) 609 77 93 Tel.: +81 (03) 3437 3948 Fax: +81 (03) 3437 3968 Specifications subject to change without notice. Contact Force Computers for complete technical detail, configuration options and ordering information. All brands or products are trademarks of their respective holders. CPCI690-Rev1101
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the CPCI-680 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods