Fluke 83V and 87V Digital Multimeters Detailed Specifications For all detailed specifications: Accuracy is given as ±([% of reading] + [number of least significant digits]) at 18 °C to 28 °C, with relative humidity up to 90 %, for a period of one year after calibration. 1 For Model 87 in the 4 ⁄2-digit mode, multiply the number of least significant digits (counts) by 10. AC conversions are ac-coupled and valid from 3 % to 100 % of range. Model 87 is true-rms responding. AC crest factor can be up to 3 at full scale, 6 at half scale. For non-sinusoidal wave forms add -(2 % Rdg + 2 % full scale) typical, for a crest factor up to 3. Fluke 87V ac voltage function specifications (true-rms) Accuracy 1 Function Range Resolution 45 - 65 Hz 30 - 200 Hz 200 - 440 Hz 440 Hz - 1 kHz 1 - 5 kHz 5 - 20 kHz 2,4 600.0 mV 0.1 mV ± (0.7 % + 4) ± (2.0 % + 4) ± (2.0 % + 20) 6.000 V 0.001 V ± (1.0 % + 4) 3 60.00 V 0.01 V ± (0.7 % + 2) ± (2.0 % + 4) unspecified 600.0 V 0.1 V 1000 V 1 V unspecified unspecified Using low pass filter ± (0.7 % + 2) ± (1.0 % + 4) + 1 % + 4 unspecified unspecified unspecified 5 -6 % - 4 1 Below 10 % of range, add 6 counts. 2 The Fluke 87V is a true-rms responding meter. When the input leads are shorted together in the ac functions, the meter may display a residual reading between 1 and 30 counts. A 30-count residual reading will cause only a 2-digit change for readings over 3 % of range. Using REL to offset this reading may produce a much larger constant error in later measurements. 3 Frequency range: 1 kHz to 2.5 kHz. 4 A residual reading of up to 13 digits with leads shorted, will not affect stated accuracy above 3 % of range. 5 Specification increases from -1 % at 200 Hz to -6 % at 440 Hz when filter is in use. Fluke 83V ac voltage function specifications (average responding rms indicating) Accuracy Function Range Resolution 50 Hz - 60 Hz 30 Hz - 1 kHz 1 kHz - 5 kHz 1 600.0 mV 0.1 mV ± (0.5 % + 4) ± (1.0 % + 4) ± (2.0 % + 4) 6.000 V 0.001 V ± (0.5 % + 2) ± (1.0 % + 4) ± (2.0 % + 4) 60.00 V 0.01 V ± (0.5 % + 2) ± (1.0 % + 4) ± (2.0 % + 4) 2 600.0 V 0.1 V ± (0.5 % + 2) ± (1.0 % + 4) ± (2.0 % + 4) 1000 V 1 V ± (0.5 % + 2) ± (1.0 % + 4) unspecified 1 Below a reading of 200 counts, add 10 counts 2 Frequency range: 1 kHz to 2.5 kHz Fluke 83V and 87V Detailed Specifications cont. DC voltage, resistance, and conductance function Temperature specifications specifications (87V only) 1, 2 Accuracy Temperature Resolution Accuracy Function Range Resolution Fluke 83V Fluke 87V -200 °C to +1090 °C 0.1 °C 1 % + 10 6.000 V 0.001 V ± (0.1 % + 1) ± (0.05 % + 1) -328 °F to +1994 °F 0.1 °F 1 % + 18 60.00 V 0.01 V ± (0.1 % + 1) ± (0.05 % + 1) 1 Does not include error of the thermocouple probe. 600.0 V 0.1 V ± (0.1 % + 1) ± (0.05 % + 1) 2 Accuracy specification assumes ambient temperature stable to ± 1 °C. 1000 V 1 V ± (0.1 % + 1) ± (0.05 % + 1) For ambient temperature changes of ± 5 °C, rated accuracy applies after 1 hour. 600.0 mV 0.1 mV ± (0.3 % + 1) ± (0.1 % + 1) 1 1 600.0 Ω 0.1 Ω ± (0.4 % + 2) ± (0.2 % + 2) 6.000 kΩ 0.001 kΩ ± (0.4 % + 1) ± (0.2 % + 1) 60.00 kΩ 0.01 kΩ ± (0.4 % + 1) ± (0.2 % + 1) 600.0 kΩ 0.1 kΩ ± (0.7 % + 1) ± (0.6 % + 1) 6.000 MΩ 0.001 MΩ ± (0.7 % + 1) ± (0.6 % + 1) 2 2 50.00 MΩ 0.01 MΩ ± (1.0 % + 3) ± (1.0 % + 3) 1 1 nS 60.00 nS 0.01 nS ± (1.0 % + 10) ± (1.0 % + 10) 1 When using the REL Δ function to compensate for offsets 2 Add 0.5 % of reading when measuring above 30 MΩ in the 50 MΩ range and 20 counts below 33 nS in the 60 nS range Current function specifications Accuracy Burden Voltage 1 2, 3 Function Range Resolution Model 83 Model 87 (typical) 5 60.00 mA 0.01 mA ± (1.2 % + 2) ± (1.0 % + 2) 1.8 mV/mA 6 5 400.0 mA 0.1 mA ± (1.2 % + 2) ± (1.0 % + 2) 1.8 mV/mA 5 6.000 A 0.001 A ± (1.2 % + 2) ± (1.0 % + 2) 0.03 V/A 4 5 (45 Hz to 2 kHz) 10.00 A 0.01 A ± (1.2 % + 2) ± (1.0 % + 2) 0.03 V/A 60.00 mA 0.01 mA ± (0.4 % + 4) ± (0.2 % + 4) 1.8 mV/mA 6 400.0 mA 0.1 mA ± (0.4 % + 2) ± (0.2 % + 2) 1.8 mV/mA 6.000 A 0.001 A ± (0.4 % + 4) ± (0.2 % + 4) 0.03 V/A 4 10.00 A 0.01 A ± (0.4 % + 2) ± (0.2 % + 2) 0.03 V/A 5 600.0 μA 0.1 μA ± (1.2 % + 2) ± (1.0 % + 2) 100 μV/μA 5 6000 μA 1 μA ± (1.2 % + 2) ± (1.0 % + 2) 100 μV/μA (45 Hz to 2 kHz) 600.0 μA 0.1 μA ± (0.4 % + 4) ± (0.2 % + 4) 100 μV/μA 6000 μA 1 μA ± (0.4 % + 2) ± (0.2 % + 2) 100 μV/μA 1 AC conversion for Model 83 is ac coupled and calibrated to the rms value of a sine wave input. 2 AC conversions for Model 87 are ac coupled, true rms responding, and valid from 3 % to 100 % of range. 3 Model 87 is a true rms responding meter. When the input leads are shorted together in the ac functions, the Meter may display a residual reading between 1 and 30 counts. A 30 count residual reading will cause only a 2 digit change for readings over 3 % of range. Using REL to offset this reading may produce a much larger constant error in later measurements. 4 10 A continuous up to 35 °C; < 20 minutes on, 5 minutes off at 35 °C to 55 °C. 20 A for 30 seconds maximum; > 10 A unspecified. 5 Below a reading of 200 counts, add 10 counts. 6 400 mA continuous; 600 mA for 18 hours maximum. Capacitance and diode function specifications Function Range Resolution Accuracy 1 10.00 nF 0.01 nF ± (1 % + 2) 1 100.0 nF 0. 1 nF ± (1 % + 2) 1.000 μF 0.001 μF ± (1 % + 2) 10.00 μF 0.01 μF ± (1 % + 2) 100.0 μF 0.1 μF ± (1 % + 2) 9999 μF 1 μF ± (1 % + 2) 3.000 V 0.001 V ± (2 % + 1) 1 With a film capacitor or better, using Relative mode to zero residual. 2 Fluke Corporation Fluke 83V and 87V detailed specifications Frequency counter specifications Function Range Resolution Accuracy Frequency 199.99 0.01 Hz ± (0.005 % + 1) (0.5 Hz to 200 kHz, 1999.9 0.1 Hz ± (0.005 % + 1) pulse width > 2 μs) 19.999 kHz 0.001 kHz ± (0.005 % + 1) 199.99 kHz 0.01 kHz ± (0.005 % + 1) > 200 kHz 0.1 kHz unspecified Frequency counter sensitivity and trigger levels Minimum Sensitivity (RMS Sine wave) Approximate Trigger Level 1 Input Range 5 Hz - 20 kHz 0.5 Hz - 200 kHz (DC Voltage Function) 600 mV dc 70 mV (to 400 Hz) 70 mV (to 400 Hz) 40 mV 600 mV ac 150 mV 150 mV — 6 V 0.3 V 0.7 V 1.7 V 60 V 3 V 7 V (≤ 140 kHz) 4 V 600 V 30 V 70 V (≤ 14.0 kHz) 40 V 1000 V 100 V 700 V (≤ 1.4 kHz) 100 V Duty Cycle Range Accuracy 0.0 to 99.9 % Within ± (0.2 % per kHz + 0.1 %) for risetimes < 1 μs 1 Maximum input for specified accuracy = 10X Range or 1000 V. Electrical characteristics of the terminals Function Overload Input Impedance Common Mode Rejection Ratio 1 Protection (nominal) (1 kΩ unbalance) Normal Mode Rejection 1000 V rms 10 MΩΩ < 100 pF > 120 dB at dc, 50 Hz or 60 Hz > 60 dB at 50 Hz or 60 Hz 1000 V rms 10 MΩΩ < 100 pF >120 dB at dc, 50 Hz or 60 Hz > 60 dB at 50 Hz or 60 Hz 1000 V rms 10 MΩΩ < 100 pF > 60 dB, dc to 60 Hz (ac-coupled) Full Scale Voltage Typical Short Circuit Current Open Circuit Test Voltage To 6.0 MΩ 50 MΩ or 60 nS 600 Ω 6 k 60 k 600 k 6 MΩ 50 MΩ 1000 V rms < 7.3 V dc < 4.1 V dc < 4.5 V dc 1 mA 100 μA 10 μA 1μA 1 μA 0.5 μA 1000 V rms < 3.9 V dc 3.000 V dc 0.6 mA typical 6 1 10 V Hz maximum MIN MAX recording specifications Model Nominal Response Accuracy 83V 100 ms to 80 % Specified accuracy ± 12 counts for changes > 200 ms in duration (± 40 counts in ac with beeper on) 87V 100 ms to 80 % Specified accuracy ± 12 counts for changes > 200 ms in duration (dc functions) > 25 % of range 120 ms to 80 % Specified accuracy ± 40 counts for changes > 350 ms and inputs (ac functions) 250 μs (peak) Specified accuracy ± 100 counts for changes > 250 μs in duration 1 (Model 87 only) (add ± 100 counts for readings over 6000 counts) (add ± 100 counts for readings in Low Pass mode) 1 For repetitive peaks: 1 ms for single events. Fluke 83V and 87V detailed specifications Fluke Corporation 3 Fluke 83V and 87V General Specifications Maximum voltage between any terminal and earth ground: 1000 V rms Fuse protection for mA or μA inputs: 44/100 A, 1000 V FAST Fuse Fuse protection for A input: 11 A, 1000 V FAST Fuse Display: Digital: 6000 counts updates 4/sec; (Model 87V also has 19,999 counts in high-resolution mode) Analog: 33 segments, updates 40/sec. Frequency: 19,999 counts, updates 3/sec at > 10 Hz Temperature: Operating: -20 °C to +55 °C; Storage: -40 °C to +60 °C Altitude: Operating: 2000 m Storage: 10,000 m Temperature coefficient: 0.05 x (specified accuracy)/ °C (< 18 °C or > 28 °C) Electromagnetic compatibility: In an RF field of 3 V/m total accuracy = specified accuracy Relative humidity: 0 % to 90 % (0 °C to 35 °C); 0 % to 7 0% (35 °C to 55 °C) Battery type: 9 V zinc, NEDA 1604 or 6F22 or 006P Battery life: 400 hours typical with alkaline (with backlight off) Vibration: Per MIL-PRF-28800 for a Class 2 instrument Shock: 1 Meter drop per IEC 61010-1:2001 Size (HxWxL): 1.25 in x 3.41 in x 7.35 in (3.1 cm x 8.6 cm x 18.6 cm) Size with holster and flex-stand: 2.06 in x 3.86 in x 7.93 in (5.2 cm x 9.8 cm x 20.1 cm) Weight: 12.5 oz (355 g) Weight with holster and flex-stand: 22.0 oz (624 g) Safety: Complies with ANSI/ISA S82.01-2004, CSA 22.2 No. 1010.1:2004 to 1000 V Overvoltage Category III, IEC 664 to 600 V Overvoltage Category IV. UL listed to UL3111-1. Licensed by TÜV to EN61010-1. Fluke.Keeping your world up and running. Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 2 675 200 or Fax (31 40) 2 675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com/ ©2005 Fluke Corporation. All rights reserved. Printed in U.S.A. 4/2005 2161164 D-US-N Rev B 4 Fluke Corporation Fluke 83V and 87V detailed specifications