FERROPERM 1582 4.7UH 1.3A
Datasheet
Ferroperm-1582 Series-Inductors-datasheet1-1733961845.pdf
356 KiB
Extracted Text
The Reliable Source . .. FERROPERM for High Quality Inductors and Transformers INDUCTORS AND TRANSFORMERS from FERROPERM UK Ltd. FERROPERM offers a manufacturing capability for the production of most types of high quality inductors and transformers, including surface mounting types. Toroidal types and wave-wound types are particular specialities. Transformers are all produced as custom designs (see page 16). Inductors are produced as custom designs (see page 15) and in standard ranges which are presented in this catalogue. A highly flexible production facility ensures short lead times on custom designs as well as standard products. We can produce designs for your applications or we can manufacture to your own designs. Rather than trying to list all the types of inductors and transformers FERROPERM can produce, it is easier to list types not made: 1. ``Mains'' (50 or 60Hz) power transformers. 2. Inductors and transformers with any dimension larger than about 300 mm. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 2 TYPE 1580 RADIO-FREQUENCY CHOKES Core .................................................... Low-loss Iron Powder Coating ................................................ Insulated with heat-shrink tube Load on Terminals ............................... 2Kg max Working Temperature .......................... -55 to +85°C ambient Marking ............................................... Type and inductance Inductance Maximum Rdc Idc A Fr MHz D mm W µH (±10%) @ 25ºC @ 85ºC Max Typ Max 10 * 0.3 0.4 0.9 36.0 8.0 16 0.7 0.9 0.6 32.0 8.0 25 * 0.9 1.1 0.6 27.0 8.0 40 1.3 1.7 0.5 18.0 8.0 50 1.6 2.0 0.5 16.0 8.0 63 1.7 2.2 0.5 14.0 8.5 80 1.9 2.4 0.4 13.0 8.5 100 * 2.0 2.6 0.4 10.0 8.5 125 2.3 2.9 0.4 10.0 8.5 160 2.6 3.3 0.4 9.0 9.0 200 3.0 3.8 0.3 8.0 9.0 250 * 3.4 4.3 0.3 7.0 9.0 315 3.9 4.9 0.3 5.5 9.0 400 4.5 5.6 0.2 5.0 9.0 500 * 5.2 6.5 0.2 5.5 9.0 * Preferred values Idc max: Maximum Current at 85ºC ambient For other temperatures use the "Load Ratings" curve 1 on page 17 To order these chokes please specify type 1580 and the inductance value. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 3 TYPE 1580 and 1580K RADIO-FREQUENCY CHOKES Core .................................................... Low-loss Iron Powder Coating ................................................ 1580 None 1580K Insulated with heat-shrink tube Load on Terminals ............................... 2Kg max Working Temperature .......................... -55 to +85°C ambient Marking ............................................... 1580 None 1580K Type and inductance Inductance Rdc W Maximum Idc A Fr MHz Maximum D mm µH (±10%) Typ 1580 1580K Typ 1580 1580K 1.0 11 0.22 0.16 3.3 8.5 10.0 2.5 19 0.16 0.12 2.0 10.0 11.5 5.0 32 0.12 0.09 1.4 11.0 12.5 10.0 47 0.12 0.09 1.0 14.0 16.0 Idc max: Maximum Current at 85ºC ambient For other temperatures use the "Load Ratings" curves on page 17 Curve1for1580KandCurve2for1580 To order these chokes please specify the type number and the inductance value. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 4 TYPE 1582 RADIO-FREQUENCY CHOKES Core .................................................... Thermoset Plastic up to 0.68µH Low-loss Ferrite above 0.68µH Coating ................................................ Moulded Polypropylene Load on Terminals ............................... 2Kg max Working Temperature .......................... -55 to +85°C ambient Marking ............................................... Type, inductance and current Inductance Q @ Fr MHz Idc A Rdc W µH (±10%) Typ F MHz Typ Typ Max 0.10 65 25 >400 0.025 3.0 0.15 65 25 >400 0.035 2.5 0.22 55 25 >400 0.045 2.0 0.33 55 25 350 0.055 2.0 0.47 55 25 320 0.07 1.7 0.68 45 15 290 0.09 1.5 1.0 45 15 190 0.04 2.2 1.5 65 8.0 155 0.05 2.0 2.2 60 8.0 130 0.06 1.8 3.3 50 8.0 110 0.07 1.7 4.7 50 8.0 95 0.12 1.3 6.8 60 8.0 85 0.22 1.0 10 50 8.0 65 0.35 0.75 15 55 2.5 55 0.6 0.6 22 65 2.5 45 1.1 0.43 33 85 2.5 35 2.0 0.3 47 70 2.5 20 2.5 0.27 68 65 2.5 16 3.0 0.25 100 65 1.5 14 4.0 0.22 150 80 0.8 9.5 5.8 0.23 220 80 0.8 8.0 7.3 0.2 330 80 0.8 9.5 12 1.16 470 80 0.8 6.5 20 0.12 680 85 0.8 5.0 24 0.11 1000 85 0.8 3.0 30 0.1 Idc max: Maximum Current at 85ºC ambient For other temperatures use the "Load Ratings" curve 2 on page 17 To order these chokes please specify type 1582 and the inductance value. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 5 TYPE 15EC24 GENERAL PURPOSE INDUCTORS Core .................................................... Ferrite Coating ................................................ Epoxy Insulation withstand voltage ................. 250V a.c. Load on Terminals ............................... 1Kg max Working Temperature .......................... -55 to +85°C ambient Marking ............................................... Standard colour banding (Base unit 1µH) Inductance Q @ Fr MHz Idc mA Rdc W µH Min F MHz Min Max Max 0.22 ±20% 40 25.2 380 0.08 1150 0.47 ±20% 40 25.2 300 0.1 1000 1.0 ±10% 40 25.2 180 0.15 815 2.2 ±10% 50 7.96 110 0.25 630 4.7 ±10% 45 7.96 50 0.35 530 10 ±10% 40 7.96 22 0.72 370 22 ±10% 50 2.52 13 1.2 385 47 ±10% 60 2.52 8.5 2.3 205 100 ±10% 60 2.52 5.5 3.5 165 220 ±10% 60 0.796 4.0 5.7 130 470 ±10% 60 0.796 2.5 11.6 90 1000 ±10% 60 0.796 1.1 30 60 To order these chokes please specify type 15EC24 and the inductance value. Certain other inductance values are available to special order. Please contact our Sales Office with your requirements. Examples of colour banding:- 1st Fig 2nd Fig Multiplier Tolerance 15EC24 u47M Yellow Purple Silver Black 15EC24 m22K Red Red Brown Silver UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 9 CUSTOM INDUCTORS from FERROPERM UK Ltd. If you already have inductor designs, we will be pleased to quote for their manufac- ture. Just send us your drawings! If you would like us to design inductors to meet your requirements, please send us the following information. If you do not have all the information available, please just give what you can. 1. Specify the application. (For example, Energy Storage Choke for a Switched Mode Power Supply). Please give as much information as you can. 2. Specify the maximum dimensions of the space you have available for the inductor. 3. Specify if you require surface mounting or through-hole mounting. 4. If you have a preference for a particular hardware design (for example rod or toroidal), please state it. 5. Specify your estimated requirements of quantities and delivery dates both for short term and long term. This is important because it may influence what hardware is specified for the design. 6. If you have a target or maximum price level, please state it. 7. Specify maximum average direct current flow. 8. Specify maximum peak current flow. 9. Sketch or describe any alternating current waveform (other than interference current). If the waveform is variable, please specify the extremes. FOR ENERGY STORAGE CHOKES (INDUCTORS): 10. Specify inductance and widest acceptable tolerance at near zero current, at maximum average current and at maximum peak current. FOR ALL OTHER INDUCTORS: 10. EITHER specify inductance and widest acceptable tolerance OR specify minimum required impedance at particular frequencies or sketch a graph of minimum required impedance versus frequency. 11. Specify if common mode (current compensated) design is required. (Examples of common mode chokes are shown on page 13.) 12. Specify maximum working voltage between windings if common mode. 13. If this working voltage is a.c., please specify the frequency. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 15 CUSTOM TRANSFORMERS from FERROPERM UK Ltd. If you already have transformer designs, we will be pleased to quote for their manufacture. Just send us your drawings! If you would like us to design transformers to meet your requirements, please send us the following information. If you do not have all the information available, please just give what you can. 1. Specify the application. (For example, Switched Mode Power Supply (SMPS) in an instrument). Please give as much information as you can. 2. Indicate by a schematic or describe how the transformer is driven and used. (For example, push-pull FET drive in a SMPS). Please give as much information as you can. 3. Draw a schematic of all windings with turns ratios and widest acceptable tolerance of turns ratios. Indicate polarity of windings where it is important. For windings with one or more taps between the ends, please make clear what turns ratios are required for each section of the winding! 4. Specify what voltage isolation requirements there are between all windings. 5. Draw or describe the voltage waveform which will be applied to the primary winding. If the waveform is variable, please specify the extremes. 6. Specify maximum working currents to be drawn from all secondary windings. 7. If occasional overload conditions have to be met, please specify these seperately. 8. Specify the maximum dimensions of the space you have available for the transformer. 9. Specify if you require surface mounting or through-hole mounting. 10. If you have a preference for a particular hardware design (for example ETD, RM or toroidal), please state it. 11. Specify your estimated requirements of quantities and delivery dates both for short term and long term. This is important because it may influence what hardware is specified for the design. 12. If you have a target or maximum price level, please state it. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 16 INDUCTORS AND TRANSFORMERS from FERROPERM UK Ltd. Whilst every care was taken to avoid any mistakes in the compilation of this catalogue, no responsibility can be assumed for any errors which may have occured in it. In line with Ferroperm's policy of continual development, Ferroperm reserves the right to alter specifications of any products without notice. UK3 Ferroperm UK Ltd. Wrexham. LL14 6HA. Tel +44 1978 823 990 Fax +44 1978 810 128 17 The Reliable Source . . FERROPERM .. .serving the electronics industry Other products from Ferroperm include . . . Filtered Sub-D Connectors Soft magnetic Ferrites & Iron Dust Cores Hard magnetic Ferrites Piezo Electric Ceramics Thin Film Optical Interference Filters FERROPERM UK LTD. Catch us on the web at Vauxhall Industrial Estate, http://www.ferroperm.co.uk Ruabon, Wrexham, Clwyd LL14 6HA. Email us on United Kingdom. mail@ferroperm.co.uk Phone +44 1978 823 990 Fax +44 1978 810 128
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 1582 4.7UH 1.3A have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods