Integrated Systems ECHO E2 SERIES Class I, Division 2 Digital Intercom Stations Federal Signal Model E2 ECHO Intercom Stations provide safe and efficient two-way voice communications in large and small ECHO Digital Intercom Systems. The E2 ECHO Station is designed and approved for use in Hazardous Areas including Class 1, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III. HAZARDOUS AREA The E2 ECHO station provides instantaneous high-speed connections and clear, crisp digital voice quality. Each sta- INTERCOM STATION tion offers single-button all call, priority emergency paging, group paging, speed dial, conference call, and relay output. Any station can call any other station(s) in an ECHO Digital • All stainless steel Intercom System. With the headset or gooseneck micro- construction phone options, each is capable of hands-free voice communication. Because the ECHO Digital Central • Super-bright LED indicator Exchange provides 30 channels of simultaneous communication, calls are processed and connected • Tactile keypad immediately without dial tone or delay. • Headset, gooseneck The E2 Station keypad is designed to provide tactile and microppone and handset audible feedback (via external powered loudspeaker) for options positive activation. Each station may be programmed for four levels of privacy for receiving calls; non-private, semi- • Output to powered private, full privacy and do-not-disturb. Volume for voice loudspeaker and signal levels are easily adjusted on the keypad. • Designed for Type 4X, IP66 Each E2 Station is constructed of heavy duty, corrosion –resistant stainless steel, equipped with weatherproof keypads, and are rated for use in Type 4X dust- and water- tight applications. ® tel: UK +44-(0)1625-666600 • USA +1-877-289-3246 Integrated Systems www.fs-isys.com Integrated Systems SPECIFICATIONS Operating Voltage: 24VDC nominal (line driven from ECHO control) Current Idle: 25ma Current Connected: 100ma LED Handset Microphone Type: Dynamic Handset Material: Moulded Polycarbonate/ABS Blend Handset Cord: Stainless Steel Stubby Microphone Type: Dynamic Stubby Microphone Sensitivity: -54dB Stubby Microphone Enclosure: Stainless Steel Audio Output: 2.7VRMS, 1k load Volume Control via Keypad: 30dB in ten steps Line Attenuation: 24dB@160kb/s Max Loop Resistance: 170 Ohm Max Distance: 2 km (1.2 miles) Max Cable: One twisted pair, non-shielded Cable Entries: 3 x Ø22mm (.88”) Hole Operating Temperature Range: -40C to +65C Termination: Plug-in screw terminal, non-polar Relay Switching Capacity: 3A at 240VAC Net Weight: 4.5kg (9.9 lbs) Shipping Weight: 6.7kg (14.8 lbs) Shipping Dimensions: 524mm x 359mm x 346mm (20.63” x 14.13” x 13.63”) MODELS AVAILABLE E2-HND Station with Handset E2-SM Station with Stubby Microphone (65mm) E2-HDS Station with Headset E2-HND-4X E2-HND in 4X enclosure (IP66) E2-SM-4X E2-SM in 4X enclosure (IP66) E2-HDS-4X E2-HDS in 4X enclosure (IP66) E2-GM1 Gooseneck microphone, 260mm E2-GM2 Gooseneck microphone, 440mm E2-GM3 Gooseneck microphone, 590mm E2-HDS E2-SM E2-SM-4X UK - Federal Signal Corporation, Integrated Systems USA - Federal Signal Corporation, Integrated Systems Hulley Road, Macclesfield, Cheshire SK10 2NF, UK 2645 Federal Signal Drive, University Park, IL 60466, USA tel: +44 (0)1625 66 66 00 fax: +44 (0) 1625 611 352 tel: +1 708-534-4723 fax: +1 708-534-4887 web: www.fs-isys.com email: systems@fedsig.co.uk web: www.fs-isys.com email: systems@fedsig.com