CPC805 - FASTWEL - Elite.Parts

Description

Fastwel CPC805 EPIC CPU Board with Intel Atom N450 1.66 GHz and COM104 expansion connector

Part Number

CPC805

Price

Request Quote

Manufacturer

FASTWEL

Lead Time

Request Quote

Category

PRODUCTS - C

Specifications

Audio

AC'97 codec (HD Audio); Onboard connector (LineIn, LineOut, MicIn)

CompactFlash Type II socket

PIO & BMIDE support; Ultra ATA 100/66/33 support

Dimensions

165 mm × 115 mm

Ethernet

Two LAN 10/100/1000 Mbit ports using twoPCI-E x1 links: Switchable between front panel and COM104 (A) connector.

Flash BIOS

8 Mbit SPI-Flash

Flash-disk

2 (4) GB NAND Flash (2 (4) channels), IDE interface: 40 (80) MB/s read, 30 (70) MB/s write

FRAM Memory

64 Kbit, 256 B RAM for storage of Bios Setup parameters; SPI bus

Graphics

VGA: resolution up to 1400×1050 @ 60 Hz, front panel connector; LVDS: resolution up to 1280×800 @ 60 Hz, single channel mode, onboard connector

Hardware Monitor

SMBus based; Three power voltages monitoring; CPU and PCB temperatures monitoring.

Indicators

Startup diagnostics LED; IDE/SATA activity; Ethernet channels LEDs (Link/Act); Two programmable LEDs

LPC Bus

Routed to COM104 (A) and Service connectors; Support for specification v1.0; Support for two Master/DMA devices

Memory

DDR2 SDRAM 667 MHz w/o ECC up to 2 GB (soldered)

MTBF:

Not less than 100 000 hours

Operating Systems

MS DOS 6.22, FDOS 6.22; Windows XP (Embedded); Linux 2.6; QNX 6.4.

Operating temperature

From –40°C to +85°C

PCI Bus

Routed to COM104 (B) connector; Support for specification v.2.3; 32-bit/33 MHz; Up to 4 bus master devices

PCI-E Bus

Routed to COM104 (A) connector; Compatibility with PCI-E 1.1 specification; Up to four ?1 devices (2.5 Gbit/s); Possibility to set x4 link (10 Gbit/s)

Power

Via external power connector from ATX source (+5V, +12V, -12V, +3.3V, +5V_STBY voltages plus PS_ON signal); From unipolar power source, 7V…30V; From PC/104-Plus (COM/104) power supply module, 10 W power consumption

Processor

Intel Atom N450 1.66 GHz

PS/2 Keyboard/Mouse Port

Onboard connector

Real Time Clock

CR2032 (3V) lithium battery backup

SATA II Interface

Up to 300 MB/s tranfer rate; One onboard connector with Innodisk SATA DOM support; Two interfaces are routed to COM104 (A) connector.

Serial Ports

???1, COM2: RS232 (up to 1.5 ?baud), front panel connectors; COM3, COM4: RS232 (up to 1.5 ?baud), TTL level, available at COM104(A); COM5, COM6: RS422/485 (up to 460 Kbaud), isolated, onboard connector

SMBus

Conforms to specification v.2.0; Up to 100 Kbps; Routed to COM104(A) connector

SPI Interface

Support for up to 4 devices (CS); Up to 25 MHz frequency; Routed to COM104 (A) connector.

Universal parallel port

SPP, EPP, ECP modes support; Onboard connector

USB Port

USB 1.1 (12 Mbps), USB 2.0 (480 Mbps); Up to 4 devices connection via front panel\ connectors; Up to 6 devices via COM104 (A).

Watchdog Timer

Internal, programmable

Features

2GB DDR2 SDRAM (soldered)
32-bit PCI, LPC, PCI-E, SMBus
4GB NAND flash
COM104 expansion connector
Compact flash socket
Industrial operating temperature range: –40°C to +85°C
Intel Atom N450 processor (1.66 GHz)
Protective coating (option)
PS/2 keyboard/mouse port
Six COM ports
Two 10/100/1000 Mbit/s ports
USB 1.1, 2.0 port
VGA, LDVS interfaces

Datasheet

CPC805-d-1344959833s.pdf

114 KiB

Download

Extracted Text

P R EL IM INA RY CPC805 Processor Module EPIC SBC based on Intel® Atom N450 1.66 GHz with COM-104 expansion connector SPECIFICATIONS n Flash-disk: n Processor: Intel Atom N450 1.66 GHz: § 2 (4) GB NAND Flash § IA 32-bit & 64-bit technology; (2 (4) channels), IDE interface: § Intel SIMD2 & 3 (SSE2 + SSE3 + SSSE3); 40 (80) MB/s read, § Hyperthreading; 30 (70) MB/s write § Level 1 cache: 32 KB instr., 24 KB data; § Level 2 cache: 512 KB; n CompactFlash Type II socket: § Intel SpeedStep § PIO & BMIDE support; § Ultra ATA 100/66/33 support n System Memory: § DDR2 SDRAM 667 MHz w/o ECC up to n SATA II Interface: 2 GB (soldered) § Up to 300 MB/s tranfer rate; § One onboard connector with n Graphics: Innodisk SATA DOM support; § VGA: resolution up to 1400×1050 @ 60 Hz, § Two interfaces are routed to front panel connector; COM104 (A) connector. § LVDS: resolution up to 1280×800 @ 60 Hz, single channel mode, onboard connector n SPI Interface: § Support for up to 4 devices (CS); n PCI Bus: § Up to 25 MHz frequency; § Routed to COM104 (B) connector; § Routed to COM104 (A) connector. § Support for specification v.2.3; § 32-bit/33 MHz; n Two LAN 10/100/1000 Mbit ports § Up to 4 bus master devices using twoPCI-E x1 links: § Switchable between front panel and n LPC Bus: COM104 (A) connector. § Routed to COM104 (A) and Service connectors; § Support for specification v1.0; n USB Port: § Support for two Master/DMA devices § USB 1.1 (12 Mbps), USB 2.0 (480 Mbps); § Up to 4 devices connection via front panel n PCI-E Bus: connectors; § Routed to COM104 (A) connector; § Up to 6 devices via COM104 (A). § Compatibility with PCI-E 1.1 specification; § Up to four х1 devices (2.5 Gbit/s); n Universal parallel port: § Possibility to set x4 link (10 Gbit/s) § SPP, EPP, ECP modes support; § Onboard connector n SMBus: § Conforms to specification v.2.0; n PS/2 Keyboard/Mouse Port: § Up to 100 Kbps; § Onboard connector § Routed to COM104(A) connector n Flash BIOS: § 8 Mbit SPI-Flash ©2010 Fastwel. Tel.: 7 (495) 232-1681. Fax: 7 (495) 232-1654. http://www.fastwel.com (ES) Equipements Scientifiques SA - Département Modules & Systèmes Informatiques - 127 rue de Buzenval BP 26 - 92380 Garches Tél. 01 47 95 99 80 - Fax. 01 47 01 16 22 - e-mail: msi@es-france.com - Site Web: www.es-france.com P R EL IM INA RY n Serial Ports: n Indicators: § СОМ1, COM2: RS232 (up to 1.5 Мbaud), front § Startup diagnostics LED; panel connectors; § IDE/SATA activity; § COM3, COM4: RS232 (up to 1.5 Мbaud), TTL § Ethernet channels LEDs (Link/Act); level, available at COM104(A); § Two programmable LEDs § COM5, COM6: RS422/485 (up to 460 Kbaud), n Operating Systems: isolated, onboard connector § MS DOS 6.22, FDOS 6.22; n FRAM Memory: § Windows XP (Embedded); § 64 Kbit, 256 B RAM for storage of Bios Setup § Linux 2.6; parameters; § QNX 6.4. § SPI bus n Power: n Real Time Clock: § Via external power connector from ATX source § CR2032 (3V) lithium battery backup (+5V, +12V, -12V, +3.3V, +5V_STBY voltages plus PS_ON signal); n Audio: § From unipolar power source, 7V…30V; § AC'97 codec (HD Audio); § From PC/104-Plus (COM/104) power supply § Onboard connector (LineIn, LineOut, MicIn) module, 10 W power consumption n Watchdog Timer: n Operating temperature:. § Internal, programmable § From –40°C to +85°C n Hardware Monitor: n MTBF: § SMBus based; Not less than 100 000 hours § Three power voltages monitoring; § CPU and PCB temperatures monitoring. n Dimensions: 165 mm × 115 mm CPC805: ORDERING INFORMATION Versions: Version RAM NAND CPС805-01 2 GB 4 GB CPC805-02 1 GB – Example: СPC805-01: CPC805, Atom N450 1.66 GHz, 2 GB DDR2 SDRAM, 4 GB NAND, two Ethernet 10/100/1000 Mbps, four USB 2.0, one LPT, two RS-232, two RS-422/485 (isolated). Delivery Checklist: § CPC805 module; § LVDS mating connector; § CD with documentation and software § Package ©2010 Fastwel. Tel.: 7 (495) 232-1681. Fax: 7 (495) 232-1654. http://www.fastwel.com (ES) Equipements Scientifiques SA - Département Modules & Systèmes Informatiques - 127 rue de Buzenval BP 26 - 92380 Garches Tél. 01 47 95 99 80 - Fax. 01 47 01 16 22 - e-mail: msi@es-france.com - Site Web: www.es-france.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products