СРС508 CompactPCI PlusIO (PICMG 2.30) 3U CPU module Features Intel Atom N450 or D510 CPU, soldered 512MB or 1GB DDR2 SDRAM soldered VGA up to 2048x1536 2 GbEthernet frontrear switchable PICMG2.30: PCI 32/33, PCIExpress 4x1, 2 SATA II, 4 USB CF and SD interfaces, 1 or 2 GB Flash SSD soldered Mezzanine MIC589: 2 USB, 2 RS232, 2 RS485 isolated, 2 CAN 2.0 isolated, HD Audio, LVDS Technical Specifications Overview Processors Gigabit Ethernet CPC508 is a PICMG 2.30 "CompactPCI Plus" • Intel Pineview�M Single Core (N450), • Two channels, 10/100/1000 MB/s compliant 3U module based on Intel® Atom™ 1.66 GHz, 512 KB cache • Sofware switchable between front and rear panels N450 or D510 and ICH8M chipset. Due to the low • Intel Pineview�D Dual Core (D510), USB ports 1.66 GHz, 1 MB cache power architecture of the Intel® Atom™ proces� • USB 1.1, USB 2.0 supported; Chipset • Connection of up to ten devices: sor, the CPU card has a low power consumption • Intel ICH8�M � USB1, USB2 at front panel of CPC508; and high performance. A specially outlined heat � USB3, USB4 routed to Mezzanine System memory sink efficiently takes away the heat from the board, Connector 1 for connection of MIC584 module; • DDR2 SDRAM 667 MHz, w/o ECC, � USB5, USB6 routed to Mezzanine even at the extended temperature range. 512 MB / 1 GB, 64�bit addressing, soldered Connector 2 for connection of MIC589 module � USB7 – USB10 are routed to J2 (PICMG 2.30) Integrated graphics controller CPC508 is designed especially for systems • 2D/3D accelerator; FRAM memory which require low power consumption, e.g. as a • VGA output to front panel • 31 KB available to user computing platform for rugged industrial PCs in N450: up to 1400 x 1050, 60 Hz, D510: up to 2048 x 1536, 60 Hz; RTC mobile applications or for infotainment applica� • LVDS interface • CR2032 (3V) Li battery backup; tions, offering the whole world of Windows® and N450: up to 1280x800, 60 Hz, • Batteryless operation possible D510: 1366 x 768, 60 Hz, Linux based software. Audio Single channel 18�bit mode; • Discrete HD Audio routed to mezzanine Routed to mezzanine connector for MIC589 On the CPC508 module high�speed interfaces connectors PCI bus of input�output are applied (PCI�Express, Gigabit Watchdog timer • Routed to J1 connector; Ethernet, DVI) and modern technologies for oper� • Fixed timeout period • 32�bit / 33 MHz; ation with video are supported. Modular creation • Support for up to four bus master devices Pow er of a product allows system flexible set up for spe� • +5 V ±5% from Compact PCI connector 8�bit local bus • Routed to mezzanine connector cific scopes, optimizing thereby the price/quality Humidity • Used for connection of legacy peripheral devices • Up to 80% noncondensing balance. located on mezzanine modules (CAN controllers, UARTs) Multiple shock / vibration stability The PICMG 2.30 "CompactPCI Plus" compliance • 50g / 5g PCIe bus allows to use 32bit PCI bus together with intermod� • Routed to J2 connector (PICMG 2.30); Dimensions ule communication for high�speed data exchange: • Support for up to four x1 devices (2.5 Gb/s) • 130.4 mm x 212.5 mm two Gigabit Ethernet channels, four x1 PCI Express Operating temperature range Flash BIOS lanes, 4 USB channels, 2 SATA channels. • From –40°C to +85°C • 16 Mbit SPI�Flash; • In�system modification MTBF For extended system functionality the mezza� • Not less than 100 000 hours Flash�disk nine module MIC589 with video/audio interfaces, • 4 GB NAND flash (dual channel); Weight CAN and serial ports is used. MIC589 can be con� • SATA interface: read 50 MB/s, write 45 MB/s • 400 g with heatsink nected to the processor CPC508 module from CompactFlash socket OS compatibility • Support for PIO & UDMA modes; both sides left and right. One of the most impor� • MS DOS 6.22, FreeDOS • Ultra ATA 100/66/33 tant advantages of such expansion unit installation • Windows XP Embedded Micro SD socket • Linux 2.6 method is that it is possible to connect less cables • SDHC cards up to 32 GB supported • QNX 6.5 to the processor CPC508 module or to avoid them SATA II interface absolutely. This can make the installation and dis� • Two channels are routed to J2 connector mantling of the CPU module from system easier. (PICMG 2.30); • Up to 300 MB/s http://www.fastwel.com СРС508 CompactPCI PlusIO (PICMG 2.30) 3U CPU module Block Diagram http://www.fastwel.com СРС508 CompactPCI PlusIO (PICMG 2.30) 3U CPU module Ordering Information CPC508 Configuration CPC508 Device Type Delivery checklist: CPC508�1 CompactPCI CPU card 3U/4HP, PICMG2.30 Intel 1. CPC508 processor module Atom N450 1.66 GHz soldered, 1GB DDR2 SDRAM 2. Package soldered, 2 x Gigabit Ethernet, 4 x 1 PCI�E, VGA, LVDS, 4GB NAND Flash, 2 x SerialATA, 2 x USB 2.0, –40°C…+85°C Accessories: 1. MIC589 – Mezzanine module with 2 x RS485, СРС508�2 ... 2 x RS232, 2 x CAN, 2 x USB, and Audio interfaces СРС508�3 CompactPCI CPU card 3U/4HP, PICMG2.30 Intel Atom D510 1.66 GHz soldered, 1GB DDR2 SDRAM soldered, 2 x Gigabit Ethernet, 4 x 1 PCI�E, VGA, LVDS, 4GB NAND Flash, 2 x SerialATA, 2 x USB 2.0, –40°C…+85°C Options (xx � version) CPC508�xx\XPe preinstalled Windows XPe CPC508�xx\LNX preinstalled Linux 2.6 \Coated protective coating Ver.1.09.2012 Product specifications are subject to change without notice Corporate Offices MIC589 MIC589 is an interface expansion module for use with CPC508 processor module Features 2 x USB 2.0 2 x CAN interfaces COM1, COM2 – RS232, up to 1.5 Mb/s, routed to rear panel COM3, COM4 – RS485/422, up to 1.5 Mb/s, switchable to front or rear panel HD Audio: Microphone input, Line in/Line out are routed to rear panel Technical Specifications USB 2.0 HD Audio codec • Two front panel connectors • Microphone input, Line in/Line out are routed to rear panel Four serial ports: • COM1, COM2 – RS232, up to 1.5 Mb/s, LVDS routed to rear panel; • 18�bit LVDS interface of CPC508 • COM3, COM4 – RS485/422, up to 1.5 Mb/s, is routed to rear panel swichable to front or rear panel; Power • Isolation up to 500 V • +5 V ±5% from Mezzanine Connector 2 (when routed to front panel). of CPC508 Two CAN interfaces • NXP SJA1000 controllers; • Swichable to front or rear panel; • Isolation up to 500 V (when routed to front panel); • Software compatibility with СРС105/CPC108 Ordering Information MIC589 Configuration MIC589 Options Delivery checklist: MIC589\Coated Protective coating option 1. MIC589 module 2. Mounting parts set 3. Package Ver.1.09.2012 Product specifications are subject to change without notice Corporate Offices