CPC506 cPCI 3U 8HP CPU Module Intel Core 2 Duo and Core 2 Solo processors (up to 2.2 GHz, 533 or 800 MHz FSB) Up to 4 GB soldered DDR2 SDRAM VGA graphics, resolution up to 2048x1536 Dual DVI�D interface, up to 1600х1200 (8HP and 12HP versions) Intermodule communication (PICMG 2.30): 32�bit PCI bus, 4 x1 PCI Express, 2 SATA II, 4 USB 2.0 Two Gigabit Ethernet ports switchable between front panel and backplane Soldered 4 GB NAND Flash with IDE interface SD card slot with USB 2.0 interface Increased heatsink versions for passive cooling MIC584 mezzanine module: 1 SATA II, 6 RS� 232/485, 2 USB, PS/2 Best solutions Protective coating (optional) to fit your demands! Operating temperature range: –40...+85°С or 0...+70°C Linux, QNX, and Windows XP Embedded support http://www.fastwel.com CPC506 cPCI 3U 8HP CPU Module Features Intel Core 2 Duo and Core 2 Solo processors (up to 2.2 GHz, 533 or 800 MHz FSB) Up to 4 GB soldered DDR2 SDRAM VGA graphics, resolution up to 2048x1536 Dual DVI�D interface, up to 1600х1200 (8HP and 12HP versions) Intermodule communication (PICMG 2.30): 32�bit PCI bus, 4 x1 PCI Express, 2 SATA II, 4 USB 2.0 Two Gigabit Ethernet ports switchable between front panel and backplane Soldered 4 GB NAND Flash with IDE interface SD card slot with USB 2.0 interface Increased heatsink versions for passive cooling MIC584 mezzanine module: 1 SATA II, 6 RS�232/485, 2 USB, PS/2 Protective coating (optional) Operating temperature range: –40...+85°С or 0...+70°C Linux, QNX, and Windows XP Embedded support Technical Specifications Overview • Ethernet: two PCI�E Gigabit Ethernet System controllers, 10/100/1000 Mb/s, front • CPU: CPC506 is a PICMG 2.30 "CompactPCI panel/J2 socket (PICMG 2.30) switchable Intel Celeron ULV 573, 1.0 GHz, 512 KB L2 Plus" compliant 3U module based on Intel Gigabit Ethernet ports cache, 533 MHz FSB Сore 2 Duo CPUs (from long term • USB: 1.1, 2.0 support, up to eight devices Intel Core 2 Duo L7500 1.6 GHz, 4 MB L2 manufacturing program) operating at up to connection cache, 800 MHz FSB 2.2 GHz with 4 MB level 2 cache, featuring • Serial ports: 6 ports available via MIC584 Intel Core 2 Duo T7500 2.2 GHz, 4 MB L2 800 MHz system bus and 965GME/ICH8M module through LPC Interface cache, 800 MHz FSB chipset. The processor executes up to 8 • Parallel port: IEEE1284, ECP/EPP/SPP • Chipset: Intel GMCH 82965GME+ICH8M floating point operations per clock cycle and support (via MIC584) • Soldered Dual Channel DDR II SDRAM up to can address up to 4 GB of soldered DDR2 • HD (high definition) audio: available via a 4096 MB system memory in 64�bit mode. mezzanine MIC584; Line In/Out, Telephone • CMOS+SFRAM for configuration parameters An increased heatsink for CPU and chipset Out, Microphone In storage cooling allows efficient heat dissipation within • PS/2 port for connecting KB and mouse via • FRAM: 31 KB memory available to user wide ambient air temperature range. mezzanine module MIC584 • Watchdog timer: programmable timeout CPC506 is PICMG 2.30 "CompactPCI Plus" • Real�time clock (RTC): batteryless operation period; NMI, IRQ, or Reset signals compliant and allows to use 32�bit PCI bus capability (without RTC) generation together with intermodule communication for • Self�control and monitoring system • MTBF: 100 000 hours high�speed data exchange: two Gigabit • LED indicators Flash BIOS Ethernet channels, four x1 PCI Express lanes, • Programmable ejector switch 4 USB channels. • SPI interface, 8 Mbit Mechanical • In�system modification The graphics controller of Intel 965GME • Dimensions: 130.4x212.5 mm (5.1"x8.4"), supports output of two independent video Graphics height: streams to two DVI�D interfaces (8HP • 2D accelerator CPC506�01/�02 with R1 � 4 HP, with R2 � 8 modification) or to standard VGA interface. • Up to 384 MB memory shared with system HP The firmware of CPC506 supports booting • VGA monitor support, resolution up to CPC506�03/�04 (with MIC588) with R1 � 8 from LAN, from SD cards, from soldered 4 GB 2048x1536, 32 bit at 75 Hz HP, with R2 � 12 HP flash memory disk, or HDDs, installed on • 2xDVI�D interfaces*, video output • Weight: CompactPCI Plus carrier (KIC550) with SATA switchable from front panel to RIO CPC506�01/�02 with R1 � 0.400 kg support, or from drives located on MIC584 • External video adapter PCI�E x16 support CPC506�03/�04 (with MIC588) with R2 – mezzanine module. Storage 0.650 kg The MIC584 mezzanine module supports • Secure Digital card socket SATA II interface with option to mount 1.8" Power Supply Options • Flash disk: up to 4 GB soldered with IDE SATA disk drive, SATA DOM solid�state • +5 V ±5% and +3.3 V ±5% from interface modules and also offers six COM ports, two CompactPCI connector • SATA interface: 3 ports (via backplane, USB 2.0, PS/2 and audio interfaces. PICMG 2.30), SATA and SATA II support Environmental Conditions CPC506 supports Linux, QNX and •Operating temperature: Windows XP Embedded operating systems. Software Support –40°C to +85 C � Industrial • FDOS (Fastwel DOS) preinstalled 0°C to +70°С � Commercial • Windows XPe • Storage temperature range: �55°C to +85°C • Linux 2.6 • Humidity: 0% to 80%, non_condensing Interfaces • Shocks/vibration: 50G/5G • PCI: 32�bit/33 MHz interface (System Warranty Master), PICMG 2.0 compliant • 3 years for parts and labor • PCI�Express: 4 x1, or 1 x4, rooted to J2 (PICMG 2.30) socket http://www.fastwel.com CPC506 cPCI 3U 8HP CPU Module Block Diagram http://www.fastwel.com CPC506 cPCI 3U 8HP CPU Module Expansion Capabilities KIC550 Interface Module: • SATA HDD 2.5" adapter: support for HDDs with SATA and SATA II interfaces; HDD dimensions: 100×70×9.5 mm (2.5"); HDD power control; Hot swap capability; SGPIO interface support; HDD activity indication • USB port: passthrough USB port of the processor module; USB 2.0 compliance; overload protection; standard front panel connector • Ethernet interface (optional): KIC550�01 version only; passthrough Ethernet port of the processor module; 10/100/1000 Base�T with auto�detection (defined by the processor module specifications); standard RJ45 front panel connector • Microcontroller: 8�bit Atmel ATMega 8�16I; communication with host�controller (SGPIO); power voltage monitoring; Indication control • Power switch: controlled by μC; P�channel MOSFET • Additional features: HDD activity and hot swap indicators on the front panel; hot swap switch integrated in the front panel ejector handle • Does not require forced cooling • Supported operating systems: Windows XP Embedded; Linux 2.4, 2.6; QNX 4.x, 6.x • Power: +12 V, +5 V • Dimensions: 3U (160×100 mm), 4HP MIC584 Expansion module for CPC506: • HD audio: Line In/Out, Telephone Out, Microphone In • Two USB 2.0 ports on front panel • Parallel port: IEEE1284, ECP/EPP/SPP support • PS/2 port for connecting KB and mouse • Six COM ports (6×16C550UART): СОМ1 – RS�232 on front panel (DSUB9M), no isolated COM2, COM3, COM4 � RS�232; IDC2�10 sockets, no isolated СОМ5, СОМ6 – RS�485; IDC2�10 sockets, no isolated • SATA interface: 2 channels (not used for connecting MIC584 to CPC503), up to two external SATA drives; one channel can be used for connection of 1.8" SATA HDD or SSD • No active cooling required • MTBF: 700000 hours • Dimensions: short 3U, 88,3×100 mm (3.48"×3.94"), 4НР (without front panel). VIM552 Graphics Controller: • LynxExp SM750 graphics processor: x1 PCI�E 1.1; 16 MB internal 32�bit DDR RAM; external 64�bit DDR RAM interface, up to 64 MB; two independent RGB outputs; the current driver version supports mirroring only; digital 24�bit output used for DVI • System memory: 64 MB soldered DDR SDRAM at 333 MHz (four 16�bit or two 32�bit chips) • Video output: VGA, up to 1920×1440 @60 Hz, front panel connector; DVI�I, up to 1920×1200 @60 Hz, single channel mode, front panel connector; optional output to RearIO via CPCI Plus Type B connector: DVI output copy; VGA0 output copy; one I2C (DDC) channel; copied to RearIO by I2C switch if necessary • PCI�E bus: PCI�Express x1 link according to PlusIO PICMG 2.30 specification; compatibility with PCI�E 1.1 (2.5 Gb/sec) • SATA interface: angle SATA data and power connector on board; the mode and transfer rate are specified; by a processor module; max current: 1 A (+5V) • USB port: one USB port available via standard front panel connector; one USB port available via DVI connector (optional) • Flash BIOS: 512 Kbit SPI�Flash • Operating temperature range: commercial – 0...+70°С • OS compatibility: MS DOS 6.22, FDOS 6.22, FreeDOS, Windows XP, XPe, Linux 2.6 • Power: +12V http://www.fastwel.com CPC506 cPCI 3U 8HP CPU Module Ordering Information CPC506 Available Options CPC506 Configuration Coating CPC506 � 01 � P1.8 � I \Options \COATED Protective Coating Operating System Presetting Configurations \XPE Windows XP Embedded \LNX Linux 2.6 01 NAND Flash 2048MB, no 2xDVI�D 02 no NAND Flash 2048MB, no 2xDVI�D Other configurations and options are available upon request. 03 NAND Flash 2048MB, 2xDVI�D 04 no NAND Flash 2048MB, 2xDVI�D Processor Example CS1.0 Intel Celeron Processor ULV 573 (512K CPC506�01�C2D2.2�RAM4096�R2�I\COATED\XPE Cache, 1.0 GHz,533 MHz FSB) 3U CompactPCI SBC, Intel Core 2 Duo 2.2 GHz, NAND Flash 2048MB, no 2xDVI�D C2D1.6 Intel Core 2 DUo Processor L7500 (4M 4096 MB Soldered DDR2 SDRAM Cache, 1.6 GHz, 800 MHz FSB) 8HP cooling system Industrial temperature range �40°C to +85°C C2D2.2 Intel Core 2 DUo Processor T7500 (512K Protective coating Cache, 2.2 GHz, 800 MHz FSB) Windows XP Embedded Memory 2048 2048MB Soldered DDR2 SDRAM 4096 4096MB Soldered DDR2 SDRAM Cooling system (front panel width) R1 4HP R2 8HP Temperature Range I Industrial Range, –40…+85°C C Commercial Range, 0…+70°C Ver. 1.2 2011 Product specifications are subject to change without notice Applications Embedded Process Control Avionics Transportation Corporate Offices FASTWEL GROUP Co. Ltd FASTWEL Corporation US V T 108 Profsoyuznaya str. 45 Main Street, Suite 319 Moscow, Russia 117437 Brooklyn, New York 11201 Tel: +7 (495) 232�1681 Tel: 1.718.554.3686 Fax: +7 (495) 232�1654 Fax: 1.718.797.0600 E�mail: info@fastwel.com Toll free: 1.877.787.8443 Web: www.fastwel.com (1.877.RURUGGED) E�mail: info@fastwel.com