CPC503 6U cPCI CPU Module Features XMC/PMC expansion modules support (x8 PCI�E GEN2 + 64�bit/133 MHz PCI�X) 4xGigabit Ethernet controllers (two ports switchable between P16 XMC connector and backplane, two ports available at the front panel) 10xUSB 2.0 ports with HS, FS and LS support (four on front panel, four via RIO, two on P16 XMC) 4xSATA ports (one for 1.8" HDD, one at P16 XMC, two via RIO) 2xDisplayport interfaces (one on front panel, one via RIO) 1xDVI�I on front panel 1xDVI�D via RIO HD Audio via RIO and P16 XMC LPC via RIO, P16 socket Technical Specifications Overview 64�bit / 66 MHz System Fastwel CPC503 CPU module is a highly PI7C9X130 PCI�E�to�PCI�X bridge • CPU: integrated x86�compatible solution in 6U HotSwap support – Core i7�2715QE, 2.1 GHz, 6 MB L4 Cache, cPCI format. Non�system slot operation (Non�Transparent – Core i7�2655LE, 2.2 GHz LV, 4 MB L2 It is designed for use in real time applica� Bridge mode) Cache tions, in process control, in high�speed data • LPC Bus: – Core i7�2610UE, 1.5 GHz ULV, 4 MB L2 acquisition and processing systems. available via P16 XMC connector Cache The module is intended for systems oper� available at Rear IO module • Chipset: PCH QM67 (includes standard ating in rugged environment, requiring high • PCI Express: peripherals of IBM PC AT platform) performance, reliability and flexibility in sup� PCI�E 2.0 support (up to 5 GT/s) • DDR3 SDRAM 1333 MHz with ECC, up to 8 port for diverse expansion interfaces. Routed to P15 XMC connector, up to x8 GB, dual channel, soldered The module supports XMC/PMC expansion devices • FRAM: 256 Kbit, RAM 256 B for BIOS Setup modules as well as Rear I/O modules. Routed to CPCI J3/P3 connector, up to х4 parameters storage; realized on SPI bus CPC503 conforms to the following devices • Watchdog Timer: integrated programmable PICMG/VITA specifications: XMC conforms to ANSI/VITA 42.3 watchdog timer • PICMG 2.0 Compact PCI r3.0 specification • MTBF: not less than 100000 hours (TBA) • PICMG 2.1 Hot Swap r.2.0 • SMBus: • PICMG 2.3 PMC I/O r.1.0 Flash BIOS Conforms to SMBus 2.0 specification • PICMG 2.16 Packet Switching Backplane r.10 • 16 Mbit SPI�Flash Speed up to 100 Kbit/sec • ANSI/VITA 39, PCI�X on PMC • SPI Interface: FRAM support, up to 25 MHz Graphics • ANSI/VITA 42.0, XMC • Ethernet: via PCI Express x4 Gen2 interface. • DVI�I interface (VGA, 2048x1536 @75Hz), • ANSI/VITA 42.3, XMC PCI Express Protocol Four 10/100/1000 ports: two ports switchable Standard DVI�D (1920х1200 @60Hz) on front panel between P16 XMC connector and Rear IO, • DisplayPort interface (up to 2560х1600 two ports available at the front panel. PICMG @60Hz) on front panel 2.16 support. Server network controller • DisplayPort interface (up to 2560х1600 • USB: 1.1, 2.0 support, up to four devices @60Hz) via Rear IO module connected to front panel connectors • Simultaneous operation of two interfaces Two ports routed to P16 XMC connector Storage Four ports available via Rear IO • NAND Flash�Disk: Integrated 4�channel • Real�time clock (RTC): CR2032 3V lithium NAND controller, up to 100 MB/sec, battery backup connected to SATA6 interface • LED Indicators: two user programmable • Serial ATA: LEDs – startup status/Hot swap indicator, One channel available at P16 XMC connector SATA activity One channel is used for connection of • Hardware Monitor: onboard 1.8" HDD Realized via PECI/SMBus interfaces Two channels available via Rear IO module Three power voltages monitoring CPU and PCB temperatures monitoring Software support • Audio: HD Audio interface available via P16 • Linux 2.6 XMC connector and Rear IO • QNX 4.25, 6.4 • VxWorks 6.8 Interfaces • PCI Bus: Routed to Compact PCI J1/J2 connectors http://www.fastwel.com CPC503 6U cPCI CPU Module XMC/PMC Expansion Modules Mechanical • Dimensions: 212.5×266.05 mm Support (8.37"×10.47") • One XMC/PMC module can be installed • Weight: 0.720 kg onboard • PCI�X 64�bit/133 MHz bus routed to P1�P4 Power PMC connectors (ANSI/VITA 39, PCI�X on +5 V 8 A; +12 V 1 A; –12 V 1 A; +3.3 V 10 A PMC) • PMC I/O P4 routed to Rear IO (PICMG 2.0) Environmental conditions • PCI�E x8 Gen2 bus routed to P15 XMC • Operating temperature: connector (ANSI/VITA 42.3, XMC PCI 0°C to +70°C – commercial Express Protocol Standard) –40°C to +85°C – industrial • Shock/vibration: 50g/5g • Additional interfaces (one SATA, two USB, LPC, HD�Audio, two Gb Ethernet) routed to Warranty P16 XMC connector • 3 years for parts and labor Board Layout http://www.fastwel.com CPC503 6U cPCI CPU Module Applications Aerospace Transportation Process Control Communications Ordering Information CPC503 Configuration CPC503 � 01 \Options CPC503 Available Options Coating \COATED Protective coating Device Type Other configurations and options are available upon request. CPC503�01 8GB RAM, 4GB NAND Flash, support for PCI�X on PMC Example CPC503�01 4GB RAM, 4GB NAND Flash, support for CPC503�01\COATED PCI�X on PMC 3U CompactPCI SBC, Intel Core i7, 8GB RAM, 4GB NAND Flash, support for PCI�X on PMC CPC503�01 4GB RAM, no NAND Flash, no support Protective coating for PCI�X on PMC Options \xxx Choose available options from the table Ver. 1.2 2011 Product specifications are subject to change without notice Corporate Offices FASTWEL GROUP Co. Ltd FASTWEL Corporation US V T 108 Profsoyuznaya str. 45 Main Street, Suite 319 Moscow, Russia 117437 Brooklyn, New York 11201 Tel: +7 (495) 232�1681 Tel: 1.718.554.3686 Fax: +7 (495) 232�1654 Fax: 1.718.797.0600 E�mail: info@fastwel.com Toll free: 1.877.787.8443 Web: www.fastwel.com (1.877.RURUGGED) E�mail: info@fastwel.com