CPC502 3U CompactPCI ® Pentium M SBC ® ® Intel Pentium M processor up to 1.8 GHz Industrial and commercial temperature ranges Low power consumption Fanless operation available High performance and reliability Shock and vibration resistant Expandable and flexible Outstanding communication Best solutions capabilities to fit your demands! Standalone operation available Flash disk soldered on board http://www.fastwel.com CPC502 ® 3U CompactPCI Pentium M SBC Features ® ® Intel Pentium M processor up to 1.8 GHz SDRAM and flash disk soldered onboard Two Gigabit Ethernet ports on internal PCIX bus Two USB 2.0 ports Two SATA interfaces Standalone operation without backplane Smart temperature control Wide range of mezzanine and rear I/O modules Operating temperature: –40°C to +85°C — industrial 0°C to +70°C — commercial Technical Specifications Overview System Interfaces This card is especially designed for ® ® • Two Gigabit Ethernet ports 10/100/1000 Mb/s • Intel Pentium M processor, up to 1.8 GHz industrial automation, instrumentation, via internal 64bit, 66 MHz PCIX bus • Up to 2 MB L2 ondie cache at CPU speed medical, telecommunications and other • Up to six USB 2.0 ports* • 400 MHz processor system bus mission critical applications. • Three RS232 serial ports (one with • Chipset: 82855GME GMCH & ® ® CPC502 is based on Intel Pentium M optoisolation). High speed 16C550 Hance Rapid ICH processor up to 1.8 GHz and has up to 1GB of compatible* • Up to 1 GB PC2700 DDR SDRAM RAM. • Parallel port: SPP/ECP/EPP compatible* (soldered) with ECC • PS/2 keyboard and mouse interface* Two Gigabit Ethernet ports working • Hardware monitor • AC’97 2.3 compliant stereo audio* through 66 MHz PCIX local bus make this • Two watchdog timers • Optoisolated remote reset* card ideally adapted for use in communication • 32bit data transmissions support for 64bit intensive applications. application cards Conformance • MTBF: 120000 hours CPU card has both SDRAM and solidstate • Core Spec. PICMG 2.0 R3.0 32bit 33 MHz; disk soldered onboard. It allows systems to System Master; 3.3V / 5V compatible BIOS operate without any moving parts, thus ® Phoenix BIOS with backup copy Mechanical providing better shock/vibration resistance. • LAN Boot • Dimensions: 3U, 4HP/8HP* (100×160 mm, All mezzanine cards can be left or right • USB Boot 3.9"×6.2") mounted. • Multi Boot • Weight: 0.380 kg • Quick Boot ATX power connector on mezzanine board • ACPI 3.0 allows 8HP system to be used as a Power requirements fullfunctioning standalone “computing • 5 V @ 6 A Graphics brick” without any backplane. • 3.3 V @ 2 A • Video controller integrated in 855GME Smart temperature control system provides • 2D/3D builtin accelerator Environmental conditions intelligent control of fan speed (if used), CPU • Shared video memory up to 64 MB • Operating temperature: clock and core voltage to achieve optimal • Analog display connector supports –40°C to +85°C — industrial thermal conditions for CPU card. resolution up to 2048×1536 @ 75 Hz 0°C to +70°C — commercial There is 32K nonvolatile RAM where user • LVDS TFT panels support* • Storage temperature: –55°C to +95°C application can save critical data if power • Humidity: 0% to 95%, noncondensing Storage fails. CPC502 also has 64K EEPROM memory • Shock/Vibration: 50G/5G • 32 MB Solid State Disk soldered onboard for user applications. • CompactFlash™ Type I/II or Microdrive™ Warranty Optoisolated Reset port can be used in socket • 3 years for parts and labor distributed or redundant systems to receive • Two EIDE Ultra ATA/100 Interfaces* Reset signal from remote location. List of deliverables • Two SATA Interfaces* • CPC502 module with radiator installed • Floppy disk interface* • CDROM with documentation and service SW Software support ® • Windows XP, XPE ® • QNX 6.4 ® • Linux 2.6 • Fastwel DOS™ (MS™ DOS compatible) * some interfaces are available via expansion modules only http://www.fastwel.com CPC502 ® 3U CompactPCI Pentium M SBC Board Layout System Expansion Capabilities MIC580 3U 4HP Mezzanine Compact Flash Chipset 82855GME CPU Pentium M / Celeron M Interface Card IDE Type II Socket Connector SVGA USB1 RIO582 USB2 3U 4HP Rear I/O Board Led indicators L1 and L2 2 Gigabit Ethernet Ports MIC583 Up to 1GB memory Li Battery 3U 4HP Rear I/O Hot swap Switch Connector Mezzanine Interface Card MIC580 Mezzanine Interface Card Overview MIC580 is a mezzanine interface expansion card, which can be installed both on the left 2.5” HDD Header FDD ATX Power LPT COM3 and on the right side of CPC502. Connector The MIC580 can bear either a fan or a 2.5" disk drive. The fan and HDD adapter are supplied together with the MIC580. COM2 Interfaces Two RS232 serial ports USB3 USB4 Two USB 2.0 ports LED Indicators LPT header (SPP/ECP/EPP compatiable) PS/2 SATA1 FDD port Line out EIDE connector Mic SerialATA connector Audio Interface (Phone, Mic, Aux In, CD in) On-board Fan EIDE Aux In CD In Connector Connector Mechanical Dimensions: 100×160 mm Weight: 0.200 kg MIC580 Mounting Options 8HP system as a backplaneless MIC580 with 2.5" HDD. MIC580 with cooling fan. standalone ultra compact “computing brick”. MIC580’s ATX power connector MIC580 is shown mounted on the MIC580 is shown mounted on the (angled version of the connector right side of CPC502 right side of CPC502 forming 8HP available upon request) allows more configuration opportunities for embedded systems developers when system size and flexibility are important. http://www.fastwel.com CPC502 ® 3U CompactPCI Pentium M SBC RIO582 Rear I/O Card Overview Backup Li Battery The RIO582 Rear I/O card provides extensive Rear I/O functionalty for the CPC502. The card allows installation of additional Li Battery which works as a backup for primary battery on CPC502. Opto-Isolated J2 cPCI COM1 Interfaces Optoisolated RS232 COM port USB5 Two USB 2.0 ports USB6 SATA2 Analog RGB connector SerialATA connector VGA External Fan External fan connector Connector Mechanical Dimensions: 100×80 mm Weight: 0.150 kg MIC583 Rear I/O Mezzanine Interface Card Overview MIC583 is a mezzanine interface expansion card. MIC583 can be installed both on the left and on the right side of Line Out RIO582. LVDS Interfaces CD In LVDS connector for TFT flatpanel displays Line In Optoisolated remote Reset connector Aux In AC'97compatible audio controller with the following Mic In connectors: Line In, Aux In, Mic In, Phone, CD In, Line Out. Phones Mechanical Opto-isolated Reset Dimensions: 100×80 mm Weight: 0.100 kg Mezzanine Cards Mounting Options The mezzanine expansion card MIC583 (shown on picture) and MIC580 can be installed both on the left and on the right side of RIO582 and CPC502 respectively. http://www.fastwel.com CPC502 ® 3U CompactPCI Pentium M SBC Panel Configurations Front Rear CPC502 CPC502 + MIC580 CPC502 + MIC580 RIO582 RIO582 + MIC583 RIO582 + MIC583 on the right on the left on the right on the left Ordering Information CPC502 Available Options CPC502 Configuration Compact Flash Module \CF1024 1024 MB Compact Flash, industrial (CF1024C – commercial) \CF2G 2 GB Compact Flash, industrial (CF2GC – commercial) CPC502  01  P1.8  RAM1024 I \Options \CF4G 4 GB Compact Flash, industrial (CF4GC – commercial) \CF8G 8 GB Compact Flash, industrial (CF8GC – commercial) \CF16G 16 GB Compact Flash, industrial (CF16GC – commercial) Device Type CPC502 Mounted With Mezzanine MIC580 ® CPC502 3U CompactPCI Pentium M SBC, DDR, FFD \MIC580IR Mezzanine MIC580 right mounted, industrial range 32 MB, VGA, 2×Gb LAN \MIC580CR Mezzanine MIC580 right mounted, commercial range Processor \MIC580IL Mezzanine MIC580 left mounted, industrial range \MIC580CL Mezzanine MIC580 left mounted, commercial range C1.0 Celeron M 1.0 GHz, LV, 400 MHz FSB Options for MIC580 only P1.4 Pentium M 1.4 GHz, 400 MHz FSB \HDDxx Hard Disk Drive 2.5" xx GB P1.8 Pentium M 1.8 GHz, 400 MHz FSB \FFD2048 Flash Disk 2.5" 2048 MB Soldered Memory \FAN Fan installed on MIC580 (for CPC502 active cooling) Coating RAM512 512 MB soldered DDR SDRAM ECC \COATED Protective coating RAM1024 1024 MB soldered DDR SDRAM ECC Operating System Presetting Temperature Range \FDOS Fastwel DOS \XPE Windows XP Embedded I Industrial Range, –40…+85°C \QNX QNX 6.4 C Commercial Range, 0…+70°C \WCE Windows CE 5 Options \LNX Linux 2.6 \xxx Choose available options from the table Other configurations and options are available upon request. Example CPC50201P1.4RAM512C\CF1024C\MIC580CR\HDD20\COATED\XPE ® 3U CompactPCI Pentium M SBC, DDR, FFD 32 MB, VGA, 2×Gb LAN Pentium M 1.4 GHz, 400 MHz FSB 512 MB soldered DDR SDRAM Commercial temperature range, 0…+70°C 1024 MB Compact Flash, commercial Mezzanine MIC580 commercial range Hard Disk Drive 2.5" 20GB Protective coating Windows XP Embedded Ver. 1.2 2011 Product specifications could be changed at any time without notice http://www.fastwel.com Eth2 Eth1 USB2 USB1 L2 L1 VGA Eth2 Eth1 USB2 USB1 L2 L1 VGA PS/2 USB4 USB3 L4 MIC Phones L3 Audio COM2 PS/2 USB4 USB3 L4 MIC Phones L3 Audio COM2 Eth1 Eth2 USB2 USB1 L2 L1 VGA VGA COM1 USB6 USB5 VGA COM1 USB6 USB5 Isolated AUDIO LVDS Reset Phones MicIN AudioIN LineIN Isolated AUDIO LVDS Reset AudioIN Phones MicIN LineIN VGA COM1 USB6 USB5 CPC502 ® 3U CompactPCI Pentium M SBC Applications Factory Automation Transportation Aerospace Communications Medical Process Control Corporate Offices FASTWEL GROUP Company Limited FASTWEL Corporation US V 108 Profsoyuznaya str. 55 Washington street, Suite 310 T Moscow, Russia 117437 Brooklyn, NY 11201 Tel: +7 (495) 2321681 Tel: 1.718.554.3686 Fax: +7 (495) 2321654 Fax: 1.718.797.0600 Email: info@fastwel.com Toll free: 1.877.787.8443 Web: www.fastwel.com (1.877.RURUGGED) Email: info@fastwel.com