CPC501 6U CompactPCI ® Pentium M SBC ® ® Intel Pentium M processor up to 1.8 GHz High performance and reliability Outstanding communication capabilities Packet switching support Best solutions Industrial and commercial temperature ranges to fit your demands! Fanless operation available http://www.fastwel.com CPC501 ® 6U CompactPCI Pentium M SBC Features ® ® Intel Pentium M processor up to 1.8 GHz Two Gigabit and one Fast Ethernet ports PICMG 2.16 and PICMG 2.1 compliant Integrated VGA graphics Onboard PMC or 2.5" HDD System and peripheral slot compliance Wide range of interfaces on and rear i/o modules Operating temperature: 0°C to +70°C — commercial –40°C to +85°C — industrial Technical Specifications Overview System Interfaces ® ® • Intel Pentium M processor, up to 1.8 GHz • Two Gigabit Ethernet ports 10/100/1000 Mb/s CPC501 is a high performance 6U • Up to 2 MB L2 on�die cache at CPU speed • One Fast Ethernet port 10/100 Mb/s CompactPCI CPU card designed for • 400 MHz processor system bus • Five USB 2.0 ports* various applications such as telecom, • Chipset: 82855GME GMCH & • Four serial ports. High speed 16C550 factory automation, transportation, 82801DB ICH4 compatible (2×RS�232, 2×RS�485)* aerospace. • Up to 1 GB PC2700 Error Correction Code • Parallel port: SPP/ECP/EPP compatible* ® ® (ECC) DDR SDRAM (SODIMM) with • PS/2 keyboard and mouse interface* The board is based on Intel Pentium M mechanical latch of memory module • PMC interface slot (for CPC501�02 only) processor up to 1.8 GHz and supports up • Hardware monitor • Rear I/O on J3�J5 to 1Gb of DDR SDRAM with ECC. • Programmable watchdog timer • AC’97 2.3 compliant stereo audio** Intel 855GME/ICH4 chipset incorporates • PICMG 2.16 and PICMG 2.1 compliant a lot of functions, lowering cost and • MTBF: 100000 hours Conformance providing high reliability. • System/peripheral slot compliance, 3.3/5V BIOS tolerant CPC501 has 2 Gigabit Ethernet ports, ® Phoenix BIOS with backup copy • System Management PICMG 2.0 R3.0 which can be flexibly configured for front • LAN Boot • Packet Switching Backplane PICMG 2.16 R1.0 or rear panel, or PICMG 2.16 backplane • USB Boot and one Fast Ethernet port. • Multi Boot Mechanical The board is fully compatible with • Quick Boot • Dimensions: 6U, 4HP (233×160 mm, PICMG 2.16 and PICMG 2.1 specificati� • ACPI 3.0 9.0"×6.2") ons, thus providing capability to build • CMOS Fast recovery subsystem • Weight: 0.725 kg robust redundant systems. Graphics Power requirements Hardware monitor and watchdog timer • Video controller integrated in 855GME • 12 V @ 0.1 A makes CPC501 suitable for mission criti� • 2D/3D built�in accelerator • 5 V @ 6 A (P1.6, 512 MB RAM) cal applications. • Shared video memory up to 64 MB • 3.3 V @ 2 A (for CPC501�01, 512 MB RAM) • Analog display connector supports 32 MB solid�state disk is soldered on� resolution up to 2048×1536 @ 75 Hz board, thus providing non�volatile storage Environmental conditions • LVDS TFT panels support (available at for system configurations without remo� RIO 581) • Operating temperature: vable disks. –40°C to +85°C — Industrial Storage 0°C to +70°C — Commercial There are RS�485 COM�ports for con� • 32 MB solid�state disk (up to 512 MB upon • Storage temperature: –55°C to +95°C nection to remote equipment. OEM request) soldered onboard • Humidity: 0% to 95%, noncondensing The board is produced in two versions – • CompactFlash™ Type I socket • Shock/Vibration: 50G/2G for industrial temperature range (–40°C to • Two EIDE Ultra ATA/100 interfaces* +85°C) and for commercial temperature • Floppy disk interface* Warranty range (0°C to +70°C). • HDD 2.5" onboard site (for CPC501�01 only) • 3 years for parts and labor Software support List of deliverables • Fastwel DOS™ (MS™ DOS compatible) ® • CPC501 module with radiator installed • Windows XP ® • Screws set for HDD installation • QNX 6.4 • CD�ROM with documentation and service SW ® • Linux 2.6 * with RIO 581, 585 ** with RIO 585 http://www.fastwel.com 6 U R e a r I / O M o d CPC501 ® 6U CompactPCI Pentium M SBC Board Layout System Expansion Capabilities The RIO581 or RIO585 Rear I/O modules provide exten� sive rear I/O functionality for the CPC501. The Rear I/O module is installed from the back of the system chassis. http://www.fastwel.com u l e s CPC501 6U CompactPCI Pentium® M SBC RIO581 Rear I/O Module Overview The RIO581 rear I/O module has been designed for use with the Fastwel CPC501 6U CompactPCI board. This rear I/O module provides comprehensive rear I/O functionality being plugged in from the back of the system into the appropriate backplane Gigabit Ethernet Port 1 connectors in line with the CPU board. A particular advantage of the rear I/O capability Gigabit Ethernet Port 2 is that there is no or less cabling on the CPU board which makes it much easier to remove the processor board from the subrack. Interfaces Two Fast Ethernet ports VGA�CRT interface VGA�LVDS interface* COM1 interface (RS�485) COM2 interface (RS�485) COM3 interface (RS�232) /RS-485 COM4 interface (RS�232) Two USB 2.0 ports /RS-485 Reset button GP programmable LED /RS-232 /RS-232 PS/2 Connector Floppy disk interface EIDE interface 3 LPT�Interface 4 Three audio connectors** Fan power connectors (3�pin) Mechanical Fan Connectors Dimensions: 233.35×80 mm Weight: 0.260 kg * RIO 581 ** RIO 585 RIO585 Rear I/O Module Overview The Rear I/O module can be supplied in two versions: RIO581 and RIO585. The RIO585 Rear I/O module has audio interface (Mic, Phone, Line In) instead of LVDS connector of RIO581 module. All other specifications for these two modules are the same. There is also RIO586 version, with highly reliable IP65 connectors. http://www.fastwel.com CPC501 ® 6U CompactPCI Pentium M SBC Panel Configurations RIO581 Rear I/O, 6U 4HP (2 Fast Ehernet, VGA�CRT, VGA�LVDS, COM1 (RS�485), COM2 (RS485), COM3 (RS�232), COM4 (RS�232), 2 USB2.0, Reset button, GP Programmable LED, PS/2, FDD Interface, EIDE Interface, LPT Interface, Fan Power connector) RIO585 Rear I/O, 6U 4HP (2 Fast Ehernet, VGA�CRT, COM1 (RS�485), COM2 (RS485), COM3 (RS�232), COM4 (RS�232), 2 USB2.0, Reset button, GP Programmable LED, PS/2, FDD Interface, EIDE Interface, LPT Interface, 3 Audio Connectors, Fan Power connector) RIO586 Rear I/O, 6U, 8HP, analog of RIO585 with increased reliability connectors Ordering Information CPC501 Available Options CPC501 Configuration SODIMM Memory Module \SODIMM512 512 MB DDR SDRAM SODIMM, industrial range \SODIMM512C 512 MB DDR SDRAM SODIMM, commercial range CPC501 � 01 � P1.8 � I \Options \SODIMM1024 1024 MB DDR SDRAM SODIMM, industrial range \SODIMM1024C 1024 MB DDR SDRAM SODIMM, commercial range \SODIMM1024ECC�I 1024 MB DDR SDRAM SODIMM with ECC, industrial range Device Type \SODIMM1024ECC�C 1024 MB DDR SDRAM SODIMM with ECC, commercial range ® CPC501 6U CompactPCI Pentium M SBC, DDR, Compact Flash Module FFD 32 MB, VGA, 2×Gb LAN \CF1024 1024 MB Compact Flash, industrial (CF1024C – commercial) Configurations \CF2G 2 GB Compact Flash, industrial (CF2GC – commercial) \CF4G 4 GB Compact Flash, industrial (CF4GC – commercial) 01 2.5" HDD Site \CF8G 8 GB Compact Flash, industrial (CF8GC – commercial) 02 PMC Site \CF16G 16 GB Compact Flash, industrial (CF16GC – commercial) Processor Coating \COATED Protective Coating P1.4 Pentium M 1.4 GHz, 400 MHz FSB Operating System Presetting P1.6 Pentium M 1.6 GHz, 400 MHz FSB \FDOS Fastwel DOS P1.8 Pentium M 1.8 GHz, 400 MHz FSB \XPE Windows XP Embedded Temperature Range \QNX QNX 6.4 \LNX Linux 2.6 I Industrial Range, –40…+85°C Other configurations and options are available upon request. C Commercial Range, 0…+70°C Options Example \xxx Choose available options from the table CPC501�01�P1.8�C\SODIMM512\CF1024C\HDD20\COATED\XPE ® 6U CompactPCI Pentium M SBC, DDR, FFD 32 MB, VGA, 2xGb LAN, 2.5" HDD site Pentium M 1.8 GHz, 400 MHz FSB Commercial Range, 0…+70°C 512 MB DDR SDRAM SODIMM, Commercial Range 1024 MB Compact Flash, commercial HDD 2.5" 20GB Protective Coating Windows XP Embedded Ver. 1.2 2011 Product specifications could be changed at any time without notice http://www.fastwel.com CPC501 ® 6U CompactPCI Pentium M SBC Applications Factory Automation Transportation Aerospace Communications Servers Power Corporate Offices FASTWEL GROUP Company Limited FASTWEL Corporation US V 108 Profsoyuznaya str. 45 Main Street, Suite 319 T Moscow, Russia 117437 Brooklyn, New York 11201 Tel: +7 (495) 232�1681 Tel: 1.718.554.3686 Fax: +7 (495) 232�1654 Fax: 1.718.797.0600 E�mail: info@fastwel.com Toll free: 1.877.787.8443 Web: www.fastwel.com (1.877.RURUGGED) E�mail: info@fastwel.com