Manufacturers
FASTWEL CPC303
Description
Fastwel CPC303 CPU Board - PC-104 Geode GX1 300 MHz CPU Board with LAN, CAN and Pentium MMX performance
Part Number
CPC303
Price
Request Quote
Manufacturer
FASTWEL
Lead Time
Request Quote
Category
EMBEDDED BOARDS » PC/104 BOARDS
Specifications
AT-compatibility
Two 8259-equivalent interrupt controllers, Two 8237-equivalent DMA controllers, 8254-equivalent timers.
Board Type
PC/104 & PC/104 Plus
Chipset
CS5530A I/O Companion
EIDE Interface
support up to two IDE devices, support PIO mode 4 and Ultra DMA/33.
Ethernet Interface
10/100Base-T PCI Fast Ethernet Controller
Floppy Drive Interface
supports one FDD
Parallel port
multi-mode port (SPP/EPP/ECP
Processor
Geode GX1 300
Geode GX1 300 MHz
RTC
Internal RTC with Li battery
SEPROM
backup copy of CMOS setup and user data
Serial ports
COM1: RS232. COM2: RS232/RS422/RS485/IR. 115.2 Kbps in 16450 or 16550A mode. up to 1.5 Mbps in extended mode. 15 kV ESD protection (IEC1000-4-2)
Solid state disk
16MB Built in with true FFS
System memory
SDRAM 32MB/128MB
VGA/LCD Controller
shared video memory up to 4 MB, non-interlaced CRT monitors resolutions up to 1024 ?768 @ 16bpp and 1280?1024 @ 256 colors. TFT panel resolution supports up to 1024?768 @ 18bpp
Features
- 2 channels CAN 2.0B
- 2 USB 1.0 ports
- AMD Geode GX1 300 MHz onboard
- CRT and flat panel support
- Fast Ethernet, 2XCOM ports
- Flash disk and SDRAM soldered onboard
- Operating temperature range: -40C to +85C.
Datasheet
Extracted Text
Preliminary CPC303 CPU CARD PC-104 SBC w. LAN, CAN and Pentium MMX performance TECHNICAL SPECIFICATIONS � Processor: Geode™ GX1 300 MHz � Chipset: CS5530A I/O Companion 1 � System memory: SDRAM 32MB/128MB � VGA/LCD Controller: • shared video memory up to 4 MB • non-interlaced CRT monitors resolutions up to 1024х768 @ 16bpp and 1280х1024 @ 256 colors • TFT panel resolution supports up to � Audio Controller: AC’97 compliant 1024х768 @ 18bpp interface � Solid state disk: 16MB Built in w. true FFS � PC speaker � EIDE Interface: � Watchdog timer: fixed time-out 1.6 sec. • support up to two IDE devices � Isolated remote RESET or IRQ • support PIO mode 4 and Ultra DMA/33 � Extension Bus: ISA -16 Bit � CF™- I, II & Microdrive™ up to 1GB Software Support � Floppy Drive Interface: supports one FDD � GENERAL™ Software Embedded BIOS: � Ethernet Interface: 10/100Base-T PCI Fast • Console via COMx port support Ethernet Controller • FastBoot™ feature (1.5 sec typ.) � Two USB 1.0 ports • SafeBoot™ feature – backup copy & � Two CAN2.0B Interface ports Watchdog Timer enabled during BIOS � Serial ports: POST and DOS Boot • COM1: RS232 � Operating system support: Microsoft MS-DOS®, Windows® XP/2000/ • COM2: RS232/RS422/RS485/IR CE, QNX®, VxWorks®, Linux® • 115.2 Kbps in 16450 or 16550A mode Power Consumption • up to 1.5 Mbps in extended mode 2 +5V ±5% @ 0.8 A -1.2 A (f=133-300MHz) • 15 kV ESD protection (IEC1000-4-2) Environmental � Parallel port: multi-mode port (SPP/EPP/ECP) � Operating temperature: –40°С to +85°С � Keyboard/Mouse PS/2 � Storage temperature: –55°С to +95°С � SEPROM: backup copy of CMOS setup and user data � Humidity: up to 95%, noncondesing � RTC: Internal RTC with Li battery � Shock/vibration: 20g/5g � AT-compatibility: � Altitude: 50,000 ft • Two 8259-equivalent interrupt controllers General • Two 8237-equivalent DMA controllers � MTBF: 12 years • 8254-equivalent timers � Size: 90,2 × 95,9 × 25,3 mm 1 2 CPC30302 option without external connection CONNECTIONS DIAGRAM KeyBoard TFT Mouse CRT- display Header PS/2 panels PS/2 0.2W, 8 Ohm Lin. input Microphone Mouse PS/2 KeyBoard PS/2 KeyBoard PS/2 Mouse PS/2 Isolated RS422/485 J1 CAN1,2 KB686E-2 J4 J3 J2 J3 J2 HDD 2.5", 3.5" FDD 3.5" Printer PSKI-686 KIB985 J7 J5 J1 J6 J5 J1 FC44 J5 J2/J3 FC34 External battery Isolated Remote J4 Isolated Remote RESET/IRQ RESET/IRQ J1 or FC14-60 KB686E-3 FC60-30 FC14-60 0-modem adapter J5 FCD9F J1 J7 FC72-30 J6 J2 Computer FCD9F buzzer J3 Ethernet 0-modem 10/100 BaseT adapter Li battery J4 USB SDRAM Computer 32/128 Processor CPC303 MB GX1-300 CF- type I/II or FLASH- MicroDrive disk socket 16 Mbyte HDD 2.5" P1 ISA-16 bit P2 J8 KIB380 = +5V@1.5A PSKI686+KIB985+KB686E-x CPC303 FUNCTIONAL BLOCK DIAGRAM J7: CAN / RS422-485 / RESET/ IRQ J6: J1: J2: IR / LPT / FDD / IDE COM1 COM2 CAN CAN Super I/O Controller Controller P1/P2: PC104 16 Bit ISA Bus Bus Extention SSD BIOS 16 MB CS5530A AC'97 Geode I/O GX1-300 Companion SDRAM 32/128 MB WDT PCI Bus 83815 Ethernet MAC&PHY J3: 10/100 BaseT J4: J9: J5: USB CF Audio / SVGA / TFT / KB / MS CPC303 CONNECTOR’S PINOUT P1: PC104 P2: PC104 Pin # Function Pin # Function Pin # Function Pin # Function C0 GND D0 GND A1 IOCHK# B1 GND C1 SBHE# D1 MEMCS16# A2 B2 C2 D2 SD7 RESET SA23 IOCS16# A3 SD6 B3 +5V C3 SA22 D3 IRQ10 A4 SD5 B4 IRQ9 C4 SA21 D4 IRQ11 A5 SD4 B5 - C5 SA20 D5 IRQ12 A6 SD3 B6 DRQ2 C6 SA19 D6 IRQ15 A7 SD2 B7 - C7 SA18 D7 IRQ14 A8 SD1 B8 0WS# C8 SA17 D8 DACK0# A9 B9 C9 D9 SD0 - MEMR# DRQ0 A10 IOCHRDY B10 - C10 MEMW# D10 DACK5# A11 AEN B11 SMEMW# C11 SD8 D11 DRQ5 A12 SA19 B12 SMEMR# C12 SD9 D12 DACK6# A13 SA18 B13 IOW# C13 SD10 D13 DRQ6 A14 SA17 B14 IOR# C14 SD11 D14 DACK7# A15 SA16 B15 DACK3# C15 SD12 D15 DRQ7 A16 B16 C16 D16 SA15 DRQ3 SD13 +5V A17 SA14 B17 DACK1# C17 SD14 D17 MASTER# A18 SA13 B18 DRQ1 C18 SD15 D18 GND A19 SA12 B19 REFRESH# C19 - D19 GND A20 SA11 B20 BCLK A21 SA10 B21 IRQ7 A22 B22 SA9 IRQ6 A23 B23 SA8 IRQ5 A24 SA7 B24 IRQ4 A25 SA6 B25 IRQ3 A26 SA5 B26 DACK2# A27 SA4 B27 TC A28 SA3 B28 BALE A29 B29 SA2 +5V A30 SA1 B30 OSC A31 SA0 B31 GND A32 GND B32 GND J7: Speaker, Reset, PS/2 Keyboard, Mouse, RS422/485, CAN1, CAN2 J1: COM1 J2: COM2 Pin # Function Pin # Function Pin # Function Pin # Function 1 Speaker 8 MS$CLK 1 1 DCD1 DCD2 2 9 GNDS Battery 2 2 DSR1 DSR2 3 RESET 10 GND 3 RxD1 3 RxD2 4 +5VS 11 +TXD2/TxDCAN0 4 RTS1 4 RTS2 5 KB$DAT 12 -TXD2/TxDCAN1 5 TxD1 5 TxD2 6 KB$CLK 13 +RxD2/RxDCAN0 6 CTS1 6 CTS2 7 MS$DAT 14 -RxD2/RxDCAN1 7 DTR1 7 DTR2 8 RI1 8 RI2 J4: USB 9 GND 9 GND Pin # Function Pin # Function 10 +5VS1 10 +5VS1 1 5 VCC1 VCC2 2 DATA1+ 6 DATA2+ J5: MS/KBD, LCD, CRT & AUDIO 3 DATA1- 7 DATA2- 4 GND1 8 GND2 Pin # Function Pin # Function 1 KB$DAT 2 +5V 3 4 KB$CLK MS$CLK J6: RS422/485, CAN1, CAN2, LPT, FDD & HDD 5 GND 6 MS$DAT Pin # Function Pin # Function 7 +5V 8 +5V 1 IR$RxD 2 IR$CIRRxD 9 FPD0 10 FPD1 3 IR$TxD 4 +5V 11 FPD2 12 FPD3 5 STB* 6 AFD* 13 FPD4 14 FPD5 7 Data 0 8 ERR* 15 GND 16 FPD6 9 10 Data 1 INIT* 17 18 FPD7 FPD8 11 Data 2 12 SLIN 19 FPD9 20 FPD10 13 Data 3 14 GND 21 FPD11 22 GND 15 Data 4 16 Data 5 23 FPD12 24 FPD13 17 Data 6 18 Data 7 25 FPD14 26 FPD15 19 GND 20 ACK * 27 FPD16 28 FPD17 21 BUSY 22 PE 29 30 GND FPCLK 23 24 SLCT GND 31 GND 32 FPDISPEN 25 INDEX* 26 MTR0* 33 GND 34 FPHSYNC 27 DR0* 28 DIR* 35 FPBLKEN 36 FPVSYNC 29 STEP* 30 WDATA* 37 FPVDDEN 38 GND 31 WGATE* 32 TRK0* 39 OUTR 40 GND 33 WP* 34 RDATA* 41 OUTB 42 GND 35 HDSEL* 36 DSKCHG* 43 44 OUTG GND 37 GND 38 RST* 45 DDCSDA 46 HSYNCB 39 GND 40 D7 47 VSYNCB 48 DDCSCL 41 D8 42 D6 49 GND 50 VCCAUD 43 D9 44 D5 51 LINOUTL 52 GNDA 45 D10 46 D4 53 LINOUTR 54 GNDA 47 D11 48 GND 55 LININL 56 GNDA 49 D3 50 D12 57 LININR 58 GNDA 51 D2 52 D13 59 MICIN 60 GNDA 53 D1 54 D14 55 D0 56 D15 J3: ETHERNET 10/100 BASE-T 57 GND 58 DRQ* 59 IOW* 60 GND Pin # Function Pin # Function 61 IOR* 62 GND 1 XMT+ 5 - 63 64 IORDY ACK* 2 6 XMT- RCV- 65 IRQ 66 ADR1 3 RCV+ 7 - 67 ADR0 68 ADR2 4 - 8 - 69 SLCT0 70 SLCT1 71 +5V 72 +5V CPC303 ORDERING INFORMATION СPC30301 GX1-300, CS5530A, SDRAM32 MB, VGA, LAN, CAN, USB, Audio СPC30302 GX1-300, CS5530A, SDRAM128 MB, VGA, LAN, CAN, USB, Audio KIB38001 KIB380 PC-104 Kit Board Kbd, Ms, VGA, TFT, Audio, LPT, HDD, FDD KIB98001 PSKI686 Kit Board Kbd, Ms, 422/485 KIB98501 KIB985 Kit Board Kbd, Ms, CAN KIB98101 KB686E-2 Kit Board Kbd, Ms, VGA, TFT, Audio KIB98201 KB686E-3 Kit Board LPT, HDD, FDD ACS00013 FC14-60 Cable ribbon 14 pin, 60 cm ACS00015 FC60-30 Cable ribbon 60 pin, 30 cm ACS00016 FC72-30 Cable ribbon 72 pin, 30 cm
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the CPC303 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Fastwel CPC1600-01-C1.0-RAM1024-C, PC/104-Plus Intel Celeron M 1.0 GHz, LV, 400 MHz FSB, 1024 MB Sol...
Fastwel CPC1600-01-P1.4-RAM1024-I, PC/104-Plus Intel Pentium M 1.4 GHz, 400 MHz FSB, 1024 MB Soldere...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods