FAIRCHILD SEMICONDUCTOR MV6400AYR
Description
LED GRN DIFF LOPRO SQ BASE 1.9MM
Part Number
MV6400AYR
Price
Request Quote
Manufacturer
FAIRCHILD SEMICONDUCTOR
Lead Time
Request Quote
Category
PRODUCTS - M
Datasheet
Extracted Text
SUBMINIATURE T-3/4 LED DIFFUSED and CLEAR LAMPS HIGH EFF. RED HLMP-6305A Water Clear MV6700A Red Diffused YELLOW HLMP-6405A Water Clear MV6300A Yellow Diffused GREEN HLMP-6505A Water Clear MV6400A Green Diffused AIGaAs RED HLMP-Q105A Water Clear HLMP-Q150A Red Diffused FEATURES PACKAGE DIMENSIONS • Subminiature T-3/4 transfer molded .087 (2.2) • Low package profile .079 (2.0) • Axial leads .276 (7.0) MIN .024 (.6) • Wide viewing angle .016 (.4) • SMT versions .091 (2.3) .083 (2.1) .020 (.5) .012 (.3) .075 (1.9) DIA DESCRIPTION .063 (1.6) .010 (.26) These T-3/4 subminiature LED lamps feature a square-base, .058 (1.48) .002 (.06) transfer molded package for surface mount applications. A tinted .050 (1.28) diffused or water clear epoxy lens available in AIGaAs red, .056 (1.44) high-efficiency red, green, and yellow produces wide-angle .048 (1.24) beam emission and sharp on/off contrast. They are available with gullwing lead bends for top mounting, as well as yoke lead bends .031 (.78) .023 (.58) and Z-bends for mounting to the back of a PCB. CATHODE MARK (COLOR STRIPE ON SIDE OF PACKAGE) NOTES: ALL DIMENSIONS ARE IN INCHES (mm). (TA =25°C) ABSOLUTE MAXIMUM RATING HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A Parameter UNITS MV6700A MV6300A MV6400A HLMP-Q150A Power Dissipation 135 85 135 85 mW Average Forward Current 30 20 30 30 mA Peak Forward Current (1 μS pulsewidth, 0.1% DF) 90 60 90 300 mA Lead Soldering Time at 260° C 5555 sec Operating Temperature -55 to +100 -55 to +100 -50 to +100 -20 to +100 °C Storage Temperature -55 to +100 -55 to +100 -50 to +100 -20 to +100 °C 2001 Fairchild Semiconductor Corporation DS300000 2/27/01 1 OF 5 www.fairchildsemi.com SUBMINIATURE T-3/4 LED DIFFUSED and CLEAR LAMPS (TA =25°C) ELECTRICAL / OPTICAL CHARACTERISTICS Part Number QTLP- MV6700A MV6300A MV6400A HLMP-Q150A Condition Luminous Intensity (mcd) I = 10mA F Minimum 1.0 1.0 1.0 1.0* Typical 3.0 3.0 3.0 1.8* *Tested at I = 1mA F Forward Voltage (V) I = 10mA F Maximum 3.0 3.0 3.0 1.8* Typical 1.8 2.0 2.0 1.6* *Tested at I = 1mA F Peak Wavelength (nm) 635 585 565 660 I = 10mA F Spectral Line Half Width (nm) 40 36 28 20 I = 10mA F Reverse Voltage (V) 5 5 5 5 I = 100μA R Viewing Angle (°) 50 50 50 50 I = 10mA F (TA =25°C) ELECTRICAL / OPTICAL CHARACTERISTICS Part Number QTLP- HLMP-6305A HLMP-6405A HLMP-6505A HLMP-Q105A Condition Luminous Intensity (mcd) I = 10mA F Minimum 3.0 3.0 3.0 20.0** Typical 12.0 12.0 12.0 50.0** **Tested at I = 20mA F Forward Voltage (V) I = 10mA F Maximum 3.0 3.0 3.0 2.4** Typical 1.8 2.0 2.0 1.8** **Tested at I = 20mA F Peak Wavelength (nm) 635 585 565 660 I = 10mA F Spectral Line Half Width (nm) 40 36 28 20 I = 10mA F Reverse voltage (V) 5 5 5 5 I = 100μA R Viewing Angle (°) 25 25 25 25 I = 10mA F www.fairchildsemi.com 2 OF 5 2/27/01 DS300000 SUBMINIATURE T-3/4 LED DIFFUSED and CLEAR LAMPS (TA =25°C) TYPICAL PERFORMANCE CURVES 90 2.5 AlGaAs 80 RED 2.0 70 HER HER 60 YELLOW GREEN 1.5 50 YELLOW 40 1.0 AlGaAs 30 RED 20 0.5 10 GREEN 0.0 0 0 5 10 15 1.0 2.0 3.0 4.0 5.0 V - FORWARD VOLTAGE (V) I - DC FORWARD CURRENT (mA) F F Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Relative Luminous Intensity vs. DC Forward Current 1.0 GREEN YELLOW AlGaAs RED 0.5 HER 0 500 550 600 650 700 750 WAVELENGTH (nm) Fig. 3 Relative Intensity vs. Peak Wavelength DS300000 2/27/01 3 OF 5 www.fairchildsemi.com I - FORWARD CURRENT (mA) F RELATIVE INTENSITY RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 10 mA) SUBMINIATURE T-3/4 LED DIFFUSED and CLEAR LAMPS OPTIONAL CONFIGURATIONS FEATURES GULLWING LEAD CONFIGURATION • Available in Gullwing, Yoke and Z-bend lead formings • Compatible with automatic placement equipment .087 (2.2) • Compatible with vapor phase reflow soldering processes .079 (2.0) • Long life solid state reliability ANODE CATHODE • Reel and tape or bulk packaging available .091 (2.3) .083 (2.1) DESCRIPTION .024 (.6) .020 (.5) .016 (.4) These subminiature solid state lamps are transfer molded in an .012 (.3) .154 (3.90) .148 (3.75) axial lead package. They are available in yellow, green, high effi- ciency red and AIGaAs red in both diffused and water clear lens. .078 (1.9) Automatic placement equipment can be used to mount the LEDs .063 (1.6) on the PC board. The lamps can be mounted using either batch or in line vapor phase reflow solder processes. .058 (1.48) .010 (.26) .050 (1.28) .115 (2.92) .002 (.06) .099 (2.52) NOTES: .039 (1.0) .033 (.82) .016 (.4) .000 (.00) .028 (.7) .008 (.2) ALL DIMENSIONS ARE IN INCHES (mm) Z-BEND LEAD CONFIGURATION YOKE LEAD CONFIGURATION .087 (2.2) .079 (2.0) .020 (.5) ANODE .087 (2.2) .012 (.3) CATHODE .079 (2.0) .091 (2.3) .083 (2.1) .091 (2.3) .083 (2.1) .024 (.6) .024 (.6) .016 (.4) .020 (.5) .016 (.4) .240 (6.1) .012 (.3) .232 (5.9) CATHODE .300 (7.62) MAX ANODE .128 (3.24) .112 (2.84) .039 (.99) .078 (1.9) .047 (1.2) .063 (1.6) .031 (0.8) .023 (.59) .078 (1.9) .063 (1.6) .010 (.26) .010 (.26) .002 (.06) .058 (1.48) .033 (.85) .002 (.06) .058 (1.48) .050 (1.28) .115 (2.92) .026 (.65) .050 (1.28) .099 (2.52) .034 (.86) .033 (.85) .048 (1.22) .117 (2.96) .026 (.66) .026 (.66) .189 (4.8) .100 (2.56) .032 (.82) .173 (4.4) www.fairchildsemi.com 4 OF 5 2/27/01 DS300000 SUBMINIATURE T-3/4 LED DIFFUSED and CLEAR LAMPS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or device or system whose failure to perform can be systems which, (a) are intended for surgical reasonably expected to cause the failure of the life implant into the body,or (b) support or sustain life, support device or system, or to affect its safety or and (c) whose failure to perform when properly effectiveness. used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. DS300000 2/27/01 5 OF 5 www.fairchildsemi.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MV6400AYR have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers



What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods