DYNISCO MODEL UPR700 1/4 DIN Pressure/Process Indicator with Optional Second Input Description The UPR700 pressure/process indicator is a field configurable and programmable instrument with a choice of 350 Ohm strain gage, voltage or current input. A display of the process variable is shown on a bright red five digit LED display, as well as a 35 segment LED bargraph. A second digital display will capture the peak reading (selectable high or low), can be blanked, or can be used as the indicator for the optional second process variable. The UPR700 is the perfect solution for those who would like to have melt temperature and pressure read out conveniently on one instrument. Features Benefits • Strain gage, V or mA input • Versatile process input choice • 2 programmable, assignable alarms; • Alarms can be linked to first or second input 3rd alarm optional • Retransmission output • Send information to other devices • Additional analog process input, TC, RTD, V • Display two process variables or mA (optional) • Serial communications (optional) • Send and receive information from PLCs, PCs, etc. • 24 Vdc transmitter power supply (optional) • Power 2 and 3 wire transmitters • Second analog output (optional) • Send second variable to another device • Three levels of security with user defined codes • Allow different authorization levels • IP65/NEMA 4X rated • Useable in harsh environments c Specifications Performance Characteristics Power supply: 100 to 240 Vac 50/60 Hz, switching Storage temperature: -20˚ to +70˚ C Power consumption: 15 VA maximum Humidity: Maximum 85% RH non - condensing Operating temperature: 0˚ to 50˚C Weight: 1.43 lbs Inputs Primary input: Selectable between strain gage and linear via jumper Auxiliary power supply (optional): 24 Vdc/1.5 W for 2 or 4 wire transmitter and configuration Input impedance: <10 Ohm for linear current input; >165 kohm for linear voltage input Strain gage input: 350 Ohm, 2 to 4 mV/V; excitation 10 V ±7% Sampling time: 50 ms typical Input signal: -25% to +125% full scale Digital input: One input, voltage free contact closure. May be programmed for one of the Shunt calibration: With or without shunt resistor (40.0% to 100.0%) following functions: a. Alarm reset b. Peak reset c. Alarm and peak reset Linear input: Selectable between 0 to 5 Vdc, 0 to 10 Vdc, 0 to 20 mA, Secondary input (optional): J, K, L, N thermocouple, PT100 RTD Outputs Main analog output: Selectable between 0 to 10 Vdc, -10 to +10 Vdc, Output functions: Selectable as main input retransmission or secondary input retransmission 0 to 5 Vdc, 0 to 20 mA, 4 to 20 mA Optional second output: Selections same as main analog output Serial Communications Protocol: Modbus/Jbus, selectable Serial Interface: RS485 ICS Schneider Meßtechnik GmbH Tel.: 03303 / 504066 info@ics-schneider.de Briesestraße 59 Fax: 03303 / 504068 www.ics-schneider.de D-16562 Bergfelde / Berlin DYNISCO MODEL UPR700 1/4 DIN Pressure/Process Indicator with Optional Second Input 3.87 (97) + 56 45 NO 23 12 +SIG 1 .61 + (15.5) -SIG .6 – C 57 46 24 13 T/C (15) – + CAL2 58 47 NC 14 3 .06 (1.5) – 59 48 NO 4 6.01 (143.5) A/A 16 +EXC 60 49 C 5.04 -EXC (128) B/B 61 50 NC 17 CAL1 C 62 51 C NC/NO 52 100/248 53 VAC~ LN + 54 21 21 – 55 22 A1 A2 A3 SMRT MAN RSP REM 3.62 (92) PEAK 4.2 (108.4) % 0 25 50 75 100 3.62 (92) 3.8 (95.8) All dimensions are in inches (millimeters) unless otherwise specified 36.288.01D Ordering Guide Model Second Input Options Power Code Description Code Description Code Voltage 0 No options 2 24 Vdc transmitter power supply UPR700 0 Not present and 2nd analog retransmission 3 100 - 240 Vac (switching) 1 TC, RTD, mA/V 3 24 Vdc transmitter power supply, 5 24 Vac/Vdc (switching) 2nd analog retransmission and RS - 485 Note: If alarm 3 is required, add the suffix A3 to the model number as shown in the ordering example below. Ordering Example: UPR700 - 1 - 2 - 3 A3 • Dual input UPR700 with 24 Vdc auxiliary power supply and 2nd analog retransmission output for 100 - 240 Vac operation and third alarm Delivery Please call for specific delivery information. ICS Schneider Meßtechnik GmbH Tel.: 03303 / 504066 info@ics-schneider.de Briesestraße 59 Fax: 03303 / 504068 www.ics-schneider.de D-16562 Bergfelde / Berlin RS485 VDC OUT2 SUPPLY mA/V ALARM2 ALARM1 ALARM3 RTD A/M FUNC + –