R VEEDER-ROOT brand VEEDER-ROOT brand DYNAPAR brand Position 1 Predetermining Counters Electronic Predetermining Counters Electronic Predetermining Counters 2 P T Bidirectional programmable R E O E L counter . . . with powerful T D E E A C specialized features for T LT E R position indication and I R O Z M control N I I I N N C I G N G At last – a predetermining counter that makes design and operation of SPECIFICATIONS automated positioning controls easy. The MAX Position 1 is perfect for Display: Red, 0.6" high (15.4 mm) LED; programmable decimal point state-of-the-art control systems, or the modernization of existing position manually operated equipment. Besides providing a highly readable LED Front Panel: Membrane laminate, NEMA-4 rated when mounted with panel position display, its eight outputs send logic information to motor control gasket, tactile response keys systems, as to actual position status being greater than or equal to, or Input Power: Selectable, 100 to 130 VAC or 200 to 260 VAC, 50/60 Hz, 20 VA less than, each of its four position-presets. (12 VDC @ 0.3 A optional). Industrial grade enclosure with NEMA-4 rated front panel – tactile Accessory Power: Output of 12 VDC, 120 mA maximum response keys Memory: Nonvolatile; retains all program and data during absence of powerLarge 8 decade LED display with programmable decimal point Security: Program lock; user lock 40 kHz count speed for error-free tracking at high slew rates Signal Inputs: 2 inputs, contact-closure or 3.5 to 15 VDC square wave Bidirectional counting input accepts encoders and other transducers Count Capacity: 6 decades with polarity 4 position presets, each with 2 outputs that signal position status Calibration: 6 decade multiplier. Range 0.00001 to 9.99999 relative to limits Presets: 4 individual position comparison limits, each with 2 dedicated Display and preset of position above and below zero (minus sign) outputs Short circuit proof, 12 VDC power output for external transducer Control Inputs: Reference Enable; Output Disable; Reset; Reference Input; Contact closure or 12 volt square wave; 25 msec. minimum pulse widthNon-volatile memory during power loss of count, presets, and program (320 μsec minimum for reference input) Outputs: 8 NPN transistors, rated 28 VDC/100 mA sink, maximumInput and setpoint for automatic reference synchronization Output Logic: Outputs function in pairs, one output detects count value RS-422/485 port supports remote data transfer with PLC or computer greater than or equal to preset, other detects count value less than preset Many convenience features are provided, such as: 115/230 VAC Serial Interface: RS-422, ASCII, programmable baud rate operation, power supply output for encoders and other transducers, and Operating Temperature: 32° to 122°F (0° to 50°C) easy-to-wire screw-terminal-blocks. Weight: 2.5 lbs. (1.13 kg.) Model No. Description MP100S00 MAX Position 1, position indicator, AC Powered MP100D00 MAX Position 1, position indicator, DC Powered Drill Typical Application: Dimensions: Press .50" 5.67" .39" 5.20" 13 mm 144 mm 10 mm 132 mm 5.35" Encoder 136 mm 2.60" 2.91" 66 mm 74 mm FRONT SIDE Position Feedback MAX Position 1 Panel Dims: Cutout: 2.68" x 5.43". Thickness: 1/16" to 1/4". Depth: 5.68" min. 2.13 DANAHER INDUSTRIAL CONTROLS