Counters, Panel Meters, Tachometers and Timers 54-60 Digital Panel Meters June 2008 ® Eclipse Series — Durant Data Retention❑Accuracy: ±0.5% of reading, ±0.13% FS, ±0.5 digit, and ±200 ■Memory Type: EEPROM, no batter- PPM/°C for crest factor = 1; plus ies required ±0.7% for crest factor = 1 to 3; and ■Duration: 100 years ±2.5% for crest factor = 5 Signal Input ■5A AC Models (5770X-44X) — ■DC Voltage Models (5770X-40X) — ❑Range: 5A AC, true RMS ❑Range: ±199.9 mV DC, ±1.999V ❑Frequency: 40 to 1000 Hz Cat. No. 57700400 DC, ±19.99V DC, ±199.9V DC, DIP ❑Impedance: 0.02 ohms (shunt out- Switch Selectable put capacitive coupled) ❑Impedance: 1 M Ω (ohms) Features ❑Overrange: 10A Maximum ❑Overrange: 750V DC/530V AC ■4 Full digits❑Accuracy: ±0.4% of reading, except 220V DC/AC on 199.9 mV ±0.13% FS, ±0.5 digit, and ±200 ■1/8 DIN Size range PPM/°C for crest factor = 1; plus ■Red, LED display❑Accuracy: ±0.1% of reading, ±0.7% for crest factor = 1 to 3; and ±0.03% FS, ±0.5 digit, and ±80 ■0.56" (14 mm) high characters ±2.5% for crest factor = 5 PPM/°C ■Scalable display ■Process Models (5770X-45X) — ■Flashing alarms■AC Voltage Models (5770X-41X) — ❑Range: 4 – 20 mA DC, 0 – 10V DC, ■Maximum/minimum data hold❑Range: 199.9 mV AC, 1.999V AC, 1 – 5V DC; separate input 19.99V AC, 199.9V AC, DIP Switch ■Optional analog, relay and RS-485 terminals for voltage and current Selectable, all ranges true RMS outputs signals ■NEMA 4X❑Frequency: 40 to 1000 Hz ❑Impedance: 100 Ω (current input) ■Depluggable terminal blocks❑Impedance: 1 M Ω (capacity and 1.27 M Ω (voltage input) coupled) ❑Overrange: 50 mA maximum (cur- ❑Overrange: 750V DC/530V AC Standards and CertiŢcations rent input) and 100V maximum except 220V DC/AC on 199.9 mV (voltage input) ■UL and cUL Listed, CE Marked range ❑Power Output: 24V DC ±10%, 90 ❑Accuracy: ±0.5% of reading, mA max, short circuit protected ±0.13% FS, ±0.5 digit, ±180 PPM/ Technical Data and ❑Accuracy: ±0.1% of reading, °C for crest factor = 1; plus ±0.7% ±0.03% FS, ±0.5 digit, and ±80 SpeciŢcations for crest factor = 1 to 3; and ±2.5% PPM/°C for crest factor = 5 Input Power Optional Outputs ■DC Current Models (5770X-42X) —■AC Powered Models (57751-4XX) ■Relay Board — ❑Range: ±199.9 µA DC, ±1.999 mA ❑Input Power: 85 – 265V AC, ❑Dual relay: 1 set of form C DC, ±19.99 mA DC, ±199.9 mA DC, 47 – 63 Hz, 20 VA contacts each DIP Switch Selectable ❑External Fuse: 0.2A, 250V AC, ❑Contact rating; 5A, 250V AC or ❑Impedance: 199.9 mV/selected Time Delay (T200mA, 250V) 30V DC range ❑Isolation Dielectric Strength: ❑Isolation dielectric strength: ❑Overrange: 30 mA (1 99.9 µA 2300V AC 2300V AC range), 100 mA (1. 999 mA range), ■DC Powered Models (57750-4XX) 300 mA (19.99 mA range), 1 A ■Analog Retransmission — ❑Input Power: 9-30V DC, 12 VA (199.9 mA range) ❑Output Signals: 4 – 20 mA ❑External Fuse: 2.0A, 50V DC, Time ❑Accuracy: ±0.1% of reading, (<750 Ω) and 0 – 10V (>2500 Ω) Delay (T2A, 50V) ±0.03% FS, ±0.5 digit, and ±120 ❑Accuracy: 0.13% FS, 100 PPM/°C, PPM/°C ❑Reverse Voltage Protection: Yes 0.07% FS change with 4 – 20 mA ■AC Current Models (5770X-43X) load, ±0.3% FS for 4 – 20 mA ❑Isolation Dielectric Strength: output, only after exposure to ❑Range: 199.9 µA AC, 1.999 mA 2300V AC to signal inputs and 85% relative humidity AC, 19.99 mA AC, 199.9 mA AC, relays, 500V AC to RS-485 and 54 DIP Switch Selectable, all ranges analog outputs❑Isolation dielectric strength: true RMS 2300V AC to signal inputs, relays Human Interface and AC power input; 500V AC to ❑Frequency: 40 to 1000 Hz ■Display: ±4 full digits RS-485 and DC power inputs ❑Impedance: 199.9 mV/selected ■Type: 0.56" (14 mm) high, seven range (shunt output capacitive segment, red LED coupled) ■Update Time: 0.4 seconds ❑Overrange: 30 mA (11 99.9 µA ■Alarm: Flashing display range), 100 mA (1.999 mA range), ■Indicator: One red LED program/ 300 mA (19.99 mA range), 1A calibration indicator with max./min. (199.9 mA range) capture and hold For more information visit: www.eaton.com CA08102001E Counters, Panel Meters, Tachometers and Timers 54-61 Digital Panel Meters June 2008 ® Eclipse Series — Durant ■RS-485 Serial Communication — Catalog Number Selection ❑Baud Rate: 1200, 2400, 4800, 9600 Table 54-62. Eclipse Series Digital Panel Meters Numbering System or 19,200, programmable ❑Parity: Even, odd or no parity 5770 X - 4X X❑Address Range: 00 to 99 decimal ®❑Protocol: Opto 22 compatible � Power Supply Output Option ❑Isolation Dielectric Strength: 2300V AC to signal inputs, relays, 0 = DC (9 – 30V DC) 0 = No Option 1 = AC (85 – 265V AC) 1 = Dual Relay and AC power input; 500V AC to 2 = Analog Output (4 – 20 mA analog outputs and DC power and 0 – 10V) inputs Input Option 3 = Dual Relay, Analog Output (4 – 20 mA and 0 – 10V) 0 = DC Volt Environmental 4 = RS-485 Communications 1 = AC Volt TRMS ■Operating Env.: Indoor use to 2000 5 = Dual Relay, RS-485 2 = DC Amp 6 = Analog, RS-485 (4 – 20 mA meters 3 = AC Amp TRMS and 0 – 10V) 4 = 5A AC TRMS■Temperature — 7 = Dual Relay, Analog, RS-485 5 = Process (4 – 20 mA, ❑Operating: 32 to 122°F (0 to 50°C) (4 – 20 mA and 0 – 10V) 0 – 10V, 1 – 5V) 6 = Temperature (J, K, T,❑Storage: -4 to 158°F (-20 to 70°C) PT100 RTD) ■Humidity: 0 to 85% RH, non- condensing � Output Options 0, 2, 4 are not available for models -41X and -43X. ■Vibration: 2.5 Gs, 30 to 200 Hz ■Shock: 30 Gs, 11 mS half sinewave ■EMC/EMI: Per EN 61326-1 Industrial ■Front Panel: NEMA 4X when mounted with gasket provided ■Agency Approval: ❑CE EMC immunity and emissions requirements were met using shielded wiring on the RS-485, analog output and signal input lines. The shields were connected to earth ground at the Eclipse end of the shields. ❑Conducted emissions requirements were met assuming that the AC signal input would not be connected directly to the AC Mains. ❑The measurement error during RF immunity testing was less than ±5% of full scale. In addition, models with an AC signal input had measurement error of less than +25% of full scale during RF immunity testing of the RS-485 at frequencies below 1 MHz. ■Pollution Deg. 2: Overvoltage Category II 54 CA08102001E For more information visit: www.eaton.com Counters, Panel Meters, Tachometers and Timers 54-62 Digital Panel Meters June 2008 ® Eclipse Series — Durant Dimensions ® Durant 2.19 1.772 ±0.02 (55.6) (45 ±0.6) PGM 4.04 (102.6) 3.622 ±0 .031 (92.0 ±0.8) Panel Cutout Max. Panel Thickness 0.19 (4.8) 3.63 (92.2) 3.31 (84.1) 0.27 (6.9) Figure 54-55. Eclipse Series Digital Panel Meters — Approximate Dimensions in Inches (mm) 54 For more information visit: www.eaton.com CA08102001E