cd PTX 510 and PTX 510/IS Industrial Pressure Transmitter • Ranges 1.5 through 10,000 psi gauge or absolute • ±0.15% F.S. BSL accuracy • Process media -20° to +250°F • 4-20 mA, two-wire output • Intrinsically safe (PTX 510/IS) • Low cost, quick delivery The PTX 510 combines micro machined silicon diaphragms with fully welded stainless steel and Hastelloy pressure ports to provide a highly accurate, stable pressure transmitter with the materials and environmental protection required for industrial applications. The silicon sensors incorporate developments derived from aerospace applications to improve output noise, non-linearity and hysteresis and long term stability. Batch manufacturing ensures optimum pricing, with the ability to custom calibrate to alternate ranges and pressure units prior to completion with the required electrical connection and rapid delivery. A detachable industrial electrical connector provides access to the independent zero and span trim controls, and if a configuration change to the electrical or pressure connections are required on-site, replacement parts and screw in pressure adaptors are available. Each transmitter incorporates RFI/EMC and electrical spike protection, and Intrinsically Safe approved units are available as an option. The PTX 510/IS version is approved for use with barrier systems to CSA Certification Class I, Groups A, B, C and D with a T4 temperature code. PTX 510 - PDS-A018 - 10/98 1 STANDARD SPECIFICATION Operating pressure range 0 to 1.5 through 0 to 880 psi gauge Output Current ACCESSORIES AVAILABLE TO ORDER: 4-20mA ( two-wire configuration) 0 to 881 through 0 to 10000 psi sealed gauge Screw in male/male adaptors 0 to 3.6 through 0 to 10000 psi absolute proportional for zero to full scale pressure. 1/4 NPT male (P/N 401-US-040) Other engineering units are available. Accuracy 7/16 UNF male (MS33656-4 compatible) Please specify, e.g. 400 in. H O gauge, (P/N 401-US-039) 2 Combined effects of non-linearity, 30 in. Hg absolute, etc. hysteresis and repeatability Adaptors manufactured in 316 stainless steel 0.15% F.S. Best Straight Line. Proof pressure Cable The rated pressure can be exceeded by the Operating temperature range For gauge ranges of 880 psi and below the following multiples without degrading 0 0 PTX 510 requires vented cable. Ambient: -5 to +175 F performances:- 0 0 Process media: -20 to +250 F 4x for ranges up to 7 psi 0 0 Storage: -40 to +250 F OPTIONS AVAILABLE: 3x for 7 psi to 600 psi Druck Inc. manufacture other ranges of Temperature Effects 2x for ranges above 600 psi pressure transmitters and can offer For ranges of 5 psi and above the output (4x available for ranges up to 600 psi, alternative electrical connections will not deviate from room temperature please contact manufacturer.) Basic cores for OEM use calibration by more than: Integral cable 0 0 Pressure Media 1% F.S. over 15 to + 122 F Military plug/socket Fluids compatible with a fully welded 0 0 2% F.S. over -5 to + 175 F Various conduit fittings assembly of 316 stainless steel and 0 0 Typically 0.7% F.S., -15 to +122 F 0 0 Hastelloy C276 (NACE compatible grades). Intrinsically safe 1.5% F.S., -5 to +175 F For ranges below 5 psi these values will Transmitters which can be certified for use Transmitter Supply Voltage increase pro-rata with calibrated span. with barrier systems, CSA and Cenelec 9-30V d.c. approvals apply. This voltage must appear across the Pressure connection When specifying model PTX 510/IS the transmitter terminals. 1/4” NPT female transmitter will be approved for use with Screw-in male/male adaptors available barrier systems to CSA Certification Class I, (See accessories) Groups A, B, C and D with a T4 temperature 1500 code. For other approvals please refer to Electrical connection Industrial plug/socket manufacturer. 1000 Submersible units UNDER Weight OVER VOLTAGE VOLTAGE 14 oz. nominal Druck Inc. specializes in submersible units. AREA AREA Please refer to the depth/level data sheet 500 Calibration standards OPERATING or consult the manufacturer. AREA Transmitters manufactured by Druck Inc. are calibrated against precision pressure Calibration equipment 0 0 10 20 30 40 Druck Inc. manufacture precision pressure calibration equipment which is traceable to POWER SUPPLY VOLTAGE (V d.c.) NIST (formerly NBS). calibrators for laboratory or field use. Please refer to the DPI 601 or DPI 510 data sheets or consult the manufacturer. Ordering information (1) PTX 510 or PTX 510/IS (2) Pressure range and engineering units Installation Dimensions: 1.1 0.9 e.g. 50 psi gauge 30 in Hg absolute, etc (3) Accessories (if required). 1.9 Continuing development sometimes necessitates specification changes without 1.1 notice. Druck is an ISO 9001 registered company. 1.5 DIA 3.1 0.866 AF 0.44 PTX510 Representative Druck Incorporated 4 Dunham Drive New Fairfield, CT 06812 Tel: (203)-746-0400 Fax: (203)-746-2494 E-Mail: usa.sales@druck.com http://www.druckinc.com cd PTX 510 - PDS-A018 - 10/98 2 TOTAL LOAD RESISTANCE (OHMS)