DIVERSIFIED TECHNOLOGY LBC9326/2800
Specifications
Bus Interface
800MHz Front Side Bus; 33/66MHz PCI Busses; 8.33MHz ISA Bus
CPU/Cache
Single or dual 90nm Low-voltage Intel Xeon
Form Factor
PCI/ISA Single Board Computer based on the
I/O
Four USB Ports
Memory
Up to 8GB using 64/128/256/512/1G x 72
Processor
Intel Xeon
Features
- BIOS:PCI 2.1 compliant field upgradeable AMI BIOS
- Bus Interface: 800MHz Front Side Bus; 33/66MHz PCI Busses; 8.33MHz ISA Bus, Supports two 64-bit/66MHz or four 64-bit/33MHz slots, High drive ISA buffers, up to 20 slots
- CPU/Cache: Single or dual 90nm Low-voltage Intel Xeon Processors at 2.8GHz and 1MB ECC L2 cache, FC-mPGA4, Intel E7520 Chipset
- Dual 10/100/1000 Ethernet
- Form Factor:PCI/ISA Single Board Computer based on the Intel Xeon processor
- I/O: Four USB Ports, Two RS-232 Serial Ports, Two RS-232 Serial Ports, Floppy Disk: Support for two drives, Serial ATA: Support for two drives, Dual PCI Express 10 Base-T/100 Base-TX/1000 Base-TX Ethe
- Intel E7520 Chipset with 800MHz FSB
- Memory:Up to 8GB using 64/128/256/512/1G x 72 DDR2-400 Registered SDRAM
- PCI Video with 8 MB SDRAM Memory
- Physical Dimensions: 13.30” x 4.80” x 1.78” at CPU/fan
- Single or Dual Low voltage Intel Xeon Processors at 2.8GHz and with
- Up to 8 GB DDR2 SDRAM with ECC
- USB, Serial, and Parallel Ports
Datasheet
Extracted Text
LBC9326 PCI/ISA Single Board Computer Product Features Form Factor PCI/ISA Single Board Computer based on the ® ® Intel Xeon processor CPU/Cache ® ® • Single or dual 90nm Low-voltage Intel Xeon Processors at 2.8GHz and 1MB ECC L2 cache, FC-mPGA4 ® • Intel E7520 Chipset Bus Interface • 800MHz Front Side Bus; 33/66MHz PCI Busses; 8.33MHz ISA Bus • Supports two 64-bit/66MHz or four 64-bit/33MHz The LBC9326 industrial single board computer features one or two 90nm slots ® ® Low-voltage Intel Xeon processors with 1MB L2 cache FC-mPGA4, • High drive ISA buffers, up to 20 slots Symmetric Multi-Processing 1.4 compliant, and up to 8GB dual channel, DDR2 SDRAM DIMMs, with full ECC support, on two sockets. Onboard are Memory two 10 Base-T/100 Base-TX/1000 Base-TX Ethernet auto-negotiating Up to 8GB using 64/128/256/512/1G x 72 controllers, dual channel Serial ATA support, as well as four Universal Serial DDR2-400 Registered SDRAM Bus (USB) ports, serial/parallel ports, floppy interface and a PCI SVGA CRT and flat-panel controller with 8 MB of SDRAM memory. I/O • Four USB Ports ® The LBC9326 uses the Intel E7520 chipset providing a 800 MHz system bus • Two RS-232 Serial Ports and internal PCI Express Links. Each x4 PCI Express link supplies a single • One bi-directional Parallel Port port Gigabit Ethernet controller allowing multiple high speed offboard • Floppy Disk: Support for two drives data transfers. The Hance Rapids ICH provides two PCI busses for added • Serial ATA: Support for two drives support. The 32-bit/33MHz onboard PCI bus links the Video controller, while • Dual PCI Express 10 Base-T/100 Base-TX/1000 the other 64-bit/66MHz PCI bus is routed to the backplane and supports up Base-TX Ethernet to two 64-bit / 66MHz or four 64-bit / 33MHz PCI I/O expansion slots. The Hance Rapids also supports USB, Serial ATA at speeds up to 150MB/s, and BIOS an LPC bus linking to an SMSC LPC47B272 Super I/O that provides legacy PCI 2.1 compliant field upgradeable AMI BIOS PCAT I/O. ISA support for 8-bit cards is also available. Physical Dimensions: The AMI BIOS, in field upgradeable Flash, supports software Ethernet 13.30” x 4.80” x 1.78” at CPU/fan enable/disable, video override, serial/parallel port re-mapping/disable, keyboard disable, console redirection, and PnP. Other features include a OS Support hardware monitor (board and system voltages, temperature, and fan speed), Windows 98, Windows ME, Windows NT, programmable three-stage watchdog timer, power fail circuit, and a 2 year Windows 2000, Windows XP, UnixWare, Solaris, limited warranty. Dual 2.8GHz processors with 1MB L2 full core speed QNX, Red Hat Linux cache. Dual Gigabit Ethernet. 64-bit/33-66MHz PCI bus and 800MHz Front Side Bus. Powerful. Diversified Technology's LBC9326 PCI/ISA industrial Warranty SBC is the ultimate choice for application developers addressing high per- Parts and labor covered for 2 years formance Datacom/Data Casting, Telecom, CTI, Industrial Automation, Medical, and Military Intelligence Markets. www.dtims.com • sales@dtims.com • 1.800.443.2667 Rev 1.4 • 04-21-2005 All trademarks and tradenames are the property of their respective owners. LBC9326 PCI/ISA Single Board Computer CPU / Cache Clock / Calendar Power Requirements ® ® ® • Single/dual 90nm Intel Xeon or LV Xeon • Real-time clock with 256 byte battery backup Input power 133W Max Processors at 2.8GHz and 1MB ECC CMOS RAM ICC typ. * +5V 4.75A L2 cache, FC-mPGA4 +12V 4.29A ® • Intel E7520 Chipset Misc. Onboard 3.3V generator to minimize backplane • PS/2 mouse and keyboard (two 6-pin power requirements. Bus Interface mini-DIN on faceplate from 10-pin header) • 800MHz Front Side Bus; 33/66MHz PCI • Speaker, Reset, Intruder, Clear CMOS, Environmental Busses; 8.33MHz ISA Bus Disable Video, Serial ATA activity LED Operating • Supports two 64-bit/66MHz or four • Strobed CPU fans (two 3 pin headers) • Temperature: 0° to 50°C / 32° to 122° 64-bit / 33MHz slots • Dual ATX12V Power • Humidity (RNC): 5 to 95% @ 40°C / 104 • High drive ISA buffers, up to 20 slots • Hardware Monitor - CPU fans, Voltages • Altitude: 2,000 m / 6,800 feet • Shock: 10g 11ms Memory BIOS • Vibration: 5-100Hz @ 1g • Dual Channel 240-pin latching DIMM socket • PCI 2.1 compliant field upgradeable AMI (1 socket per channel) BIOS, boot from LAN (PXE 2.0) Storage and Transit (in approved packaging) • Up to 8GB using 64/128/256/512/1G x 72 • Support for memory hole at 15-16 MB; • Temperature: -40° to +70°C / -40° to 158°F DDR2-400 Registered SDRAM PnP V1.0a compatible • Humidity (RNC): 0 to 95% @ 40°C / 104°F • Setup console redirection to serial port • Altitude: 15,240 m / 50,000 feet Data Path (VT100 or ANSI mode) with CMOS setup • Shock: 40g 6ms • 64-bit / 800MHz on CPU and memory bus access 2 • Vibration: 5-20 @ 0.01g /Hz • Two x4 PCI Express Links • Software enable/disable onboard Ethernet 20-500Hz with -3dB Slope • 64-bit / 66MHz on off-board PCI bus; • Diskless, keyboardless, and videoless 32-bit / 33MHz on onboard PCI bus operation extensions; system, video, and Reliability • 8-bit on ISA bus third party option card ROM shadowing • MTBF: >233,000 hours @ 20°C / 68°F • Advanced security features for floppy and (Telecordia) Flash Memory HDD; SymBIOS V2.3 and HDD S.M.A.R.T. • 2 year limited warranty • 8 Mb (1 MB) sectored Flash for BIOS field support • USB and mouse/key-board voltage protected upgrade • Advanced thermal management by self-resetting fuses • 4 KB serial EEPROM for user configuration (overheat alarm and auto slow down) • Multiport support, custom BIOS graphical Regulatory Compliance I/O boot • Safety: UL/cUL to 60950-1; CSA C22.2 • USB Ports: four (one 10-pin header, one No 950-93; EN 60950-1 stacked Type A on face plate) Supervisory • EMI/EMC: FCC 47 CFR Part 15 Class A; • Serial Ports: Two RS-232 (16C550) with • Three-stage programmable watchdog timer EN55022 Class A; EN50081-1; EN55024 16 byte FIFO as COM1-2 with BIOS drives interrupt on 1st stage, NMI on 2nd selectable IRQs and addressing, (two male stage, system reset on 3rd stage Ordering Information 10-pin shrouded headers) • Hardware system monitor (voltages, CPU, LBC9326/2800 (D) ® • Parallel Port: One bi-directional with all IEEE and board temperature, fan speed) SBC with single/dual 2.8GHz LV Xeon processors 1284 protocols supported and BIOS • Power failure and two end-user defined * (D) is used to indicate dual processors selectable IRQs and addressing, (male open-drain general purpose I/Os. 26-pin shrouded header) Options • Floppy Disk: Support for two drives OS Compatibility DDR2 SDRAM Cables (360KB to 2.88MB), (male 34-pin shrouded header) Windows 98, Windows ME, Windows NT, • Serial ATA: Support for two drives, up to Windows 2000, Windows XP, UnixWare, 150MB/s Solaris, QNX, Red Hat Linux • Ethernet: Dual PCI Express 10 Base-T / 100 Base-TX / 1000 Base-TX (Marvell 88E8052), Mechanical (dual shielded RJ-45 on face plate with • 13.30” x 4.80” x 1.78” at CPU / fan link/activity and speed LEDs) (338 mm x 122 mm x 70 mm at CPU / fan) • Double wide face plate Video • Conforms to IEEE P996 PC/AT bus, • PCI SVGA CRT/flat panel controller with PCI Rev. 2.1, and PICMG Rev. 2.0 standards 8 MB SDRAM memory (Silicon Motion SM722), (female DB-15 on face plate and 21-pin LVDS connector onboard) • Supports CRTs with resolution up to 1280x1024, 16.8M colors@60Hz; 1280x1024, 64K colors@85Hz; or 1024x768, 16.8M col.@85Hz, non-interlaced All products are shipped FOB factory (MS). Specifications subject to change without notice. Trademarks are the property of their respective owners. (C) Copyright 2006 by Diversified Technology, Inc. All rights reserved. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the LBC9326/2800 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Diversified Technology LBC-8918 Intel Pentium III Processor with 512KB L2 Cache at 1.26GHz CPU Board

Diversified Technology LBC-8926 CPU Board. Dual Ethernet | PCI EIDE | Flash Disk Support PCI Ultra-...

Diversified Technology LBC-8940 - Dual PCI 10/100 Base-T Ethernet, 4 PCI EIDE Devices, Flash Disk Su...

Diversified Technology LBC-9017 CPU Board. PCI/ISA | 2.0GHz/400MHz Low Voltage Xeon Processor | 512K...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods