Audio

AC'97 2.1 controller and CODEC

BIOS

PCI 2.2 compliant field upgradeable AMI BIOS, boot from LAN (PXE 2.0), Support for memory hole at 15-16 MB; PnP 1.0a compliant, Setup console redirection to serial port (VT100/ANSI mode) with CMOS setup access, Software enable/disable onboard Ethernet, Diskless, keyboardless, and videoless operation extensions; system, video, and third party option card ROM shadowing, SMBIOS V2.3.1, S.M.A.R.T. support, ACPI Rev 1.0b compliant, Multiboot support, custom BIOS graphical boot

Bus Interface

400MHz Front Side Bus, Supports 200/266/333 MHz DDR SDRAM devices, 33MHz PCI Busses, Supports four, 32-bit/33MHz slots

Clock / Calendar

Replaceable battery powered real-time clock with 256 byte CMOS RAM, Power fail/low battery detector

CPU / Cache

Intel Pentium M or Celeron M processor, Intel 855GME chipset, ICH4-M I/O Controller

Data Path

64-bit, 400MHz on CPU and 64-bit (72-bit with ECC) 200/266/333 MHz on memory bus, 32-bit/33MHz on off-board PCI bus; 32-bit/33MHz on on-board PCI bus Full ISA Support including Master (up to 3 slots)

Flash Memory

8 Mb (1 MB) Flash for BIOS field upgrade

Form Factor

ETX Computer Module based on the low power, Intel Pentium M and Celeron M processors

I/O

Four USB 2.0 Ports, Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-2 with BIOS selectable IRQs and addressing. COM 2 also selectable as IrDA port. Parallel Port: One bi-directional with all IEEE, 1284 protocols supported and BIOS selectable IRQs and addressing, Floppy Disk: (via parallel port) Support for one drive (360 KB to 1.44 MB)*Non-twisted cabling only. EIDE: PCI Ultra ATA/100, support for four drives (master/slave configuration); PIO, Mode 4, Bus Master IDE or DMA mode, 5 transfers up to 100 MB/s, Ethernet: PCI 10 Base-T / 100 Base-TX, Intel 82562EM (with link and activity signals)

Mechanical

4.49 in. x 3.94 in. x 0.47 in. at CPU / fan (114 mm x 100 mm x 12 mm), Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.2, & ETX Specification 2.6 standards

Memory

One 200-pin latching right angle 2.5V DDR, SODIMM socket (1" or 1.25" modules), Up to 1GB using 128/256/512-Mbit single or double-sided technologies. PC1600/2100/2700 DDR SDRAM

Misc

PS/2 mouse/keyboard, Speaker, reset, Hardware Monitor - CPU and ambient board temperature, input voltages

Operating (with approved thermal solution)

Temperature: 0° to 65°C / 32° to 149°F, Humidity (RNC): 5 to 95% @ 40°C / 104°F, Altitude: 3048m / 10,000ft, Vibration: 1G 5-500Hz

OS Compatibility

Windows 2000, Windows XP, Windows NT, Red Hat Linux, Solaris, QNX, UnixWare

Power Requirements

Input Power Rail: +5V, Typical Power Consumption: 1.1 GHz 2.92A, 1.4 GHz 3.08A, 1.6 GHz 3.86A

Processor

Intel Pentium M

Regulatory Compliance

Safety: UL/cUL 60950-1:2003, EN/IEC 60950-1:2001, EMC Class A: FCC 47 CFR part 15-B, CISPR22:1997/EN55022:1998, EN55024:1998

Reliability

MTBF: 394,143 hours @ 25°C, (performed to Issue 6, Method I, Case 3 of the Bellcore IR Program) 2 year limited warranty

Storage and Transit (in approved packaging)

Temperature: -40° to 70°C / -40° to 158°F, Humidity (RNC): 5 to 95% @ 40°C / 104°F, Altitude: 15,240m / 50,000ft, Shock: 30” free fall, Vibration: 0.5G 5-50Hz, 3G 50-500Hz

Supervisory

Watchdog timer, drives a system reset. Hardware system monitor (voltages, CPU, and board temperature,)

Video

Intel Extreme Graphics 2 Controller, Dual Channel LVDS flat panel and CRT output. (Simultaneous CRT and LCD capability) 2D/3D Graphics Support. Up to 64MB Dynamic Video RAM, Max CRT Resolution: 2048 x 1536 at 75Hz, Max LCD Resolution: 1600 x 1200 at 60Hz

Warranty

Parts and labor covered for 2 years