Industrial Tower Enclosure CT20 • Accommodates 20 Slot Backplane • 12 Standard 5.25” Half-Height Drives or 5 Full-Height Drives • Front Panel LEDs • 300 or 400 W, AC or DC, Hot-Swappable Power Supply System • UL and FCC Certified • 27.75” H x 9.75” W x 28.5” D SPECIFICATIONS: 28.5”D x 9.75”W x 27.75”H PHYSICAL DIMENSIONS : 300W or 400W AC or DC, Hot-Swappable POWER : 12 five and 1/4” Half-Height Hard Drives CARD CAGE CAPACITY : Four visible through door FRONT ACCESS DRIVE BAYS : Power, H.D., Power/Fail, Temp. FRONT PANEL INDICATORS : Power On, Reset FRONT PANEL CONTROLS : Individual Power Supply Switch REAR PANEL CONTROLS : 6 Serial, 6 Parallel Card Cage: 296 CFM COOLING : Power Supply: 40 CFM ea. www.dtims.com Rev. 1.2 1.800.443.2667 September 2, 2004 All trademarks and tradenames are the property of their respective owners. CT20 Industrial Tower Enclosure Rugged American Made Steel Construction Front Mounted Up to a 20 slot LED Alarm Status Backplane; Indicators for ISA, EISA, or PCI System Voltage, Local Bus with PCI Temperature, Bridge Support Airflow, etc. 12 Front Panel Accessible Dual Redundant 5.25” Half Height Load Sharing Drive Bays Power Supplies (AC or DC) Up to 400 Watts each The CT20 is a desk side tower computer both units operate considerably cooler than The CT20 has, as a standard feature, a LED chassis incorporating many of the features either a single power supply or the dominant status/indicator panel for use with DTI CPU found in industrial systems for mission critical supply in a typical hot-standby system. In the cards equipped with system monitoring capa- applications. The combination of an attractive unlikely event that one of the power supplies bilities. The LED panel will provide status of enclosure, multiple power supply options, should fail, each individual supply is capable internal temperature, voltage signal conditions fault tolerance, serviceability, diagnostic fea- of fully supplying the load for the entire sys- as well as user-defined monitoring. Contact tures, cooling, high slot count, and large stor- tem. LED indicators on each power module DTI Sales & Marketing for more information. age capacity is unequaled in one package. provide panel indication of individual power The chassis is manufactured of 18 gauge supply status. The CT20 can be ordered as AC steel that is plated for corrosion resistance. or 48 volt DC input voltages with 300 or 400 The exterior panels and bezel are painted with Watt output configurations. polyurethane paint. The large door on the Four independently mounted 35 CFM fans front allows access to the peripheral drives and provide the main cooling for the card cage All products are shipped FOB factory (MS). Specifications subject to change without notice. air filter. area. The fans are pluggable and can easily be Trademarks are the property of their respective owners. The drive bay area will accept 12 standard replaced during operation of the system. Dual (C) Copyright 2004 by Diversified Technology, Inc. 5.25” half height drives or 5 full height drives. fans located in the rear of the CT20 exhausts All rights reserved. Any combination of floppy drives, hard air from the card cage area. The air filter is drives, tapes or CD-ROM’s can be used in the easily accessible for removal and cleaning and drive bays. When combined with an appropri- is mounted on the inside of the front panel for ate disk controller, a multi-gigabyte RAID the cooling fans. Removing the left side panel configuration can be installed in the CT20. gains access to the card cage area. The side The rear loading, dual, hot swappable, loading card cage allows easy access and power supply module contains commercial quick installation and removal of plug-in cards rated power supplies which operate in a load in the passive backplane. The card cage area sharing redundant mode with their own self can be configured with any of DTI’s ISA, contained airflow system. By sharing the sys- EISA & PCI passive backplanes having up to tem load equally between the power supplies, 20 slots. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157