1U Low Profile Platform CRM120 • Embedded Celeron or Single/Dual Pentium III FC-PGA Processor up to 850 MHz • Intel 440GX Chipset with 66/100MHz FSB • Up to 1.5GB of SDRAM • AGP Video • Dual 10/100 Base-TX Ethernet • Dual Channel EIDE • Slim Floppy, 2 Serial, 1 Parallel, and 2 USB Ports • System Monitor • 2 Full Length and 1 Half Length 32-Bit / 33MHz PCI Slot • 2 RAID Capable Drive Bays plus a Floppy and CDROM • Front Panel LEDs • 1.75"H(1U) x 19"W x 21.25"D SPECIFICATIONS: PROCESSOR STATUS INDICATORS • Single Intel Celeron Major and Minor Fault Indicators for: • Single or Dual Intel Pentium III • Temperature • (66 or 100 MHz Front Side Bus) • Fans • Voltages CHIPSET • Intel 440GX EXPANSION SLOTS • 3 Full Length PCI Slots MEMORY • Up to 1.5 GB Using PC-100 SDRAM DRIVE SUPPORT • (1) 3.5” Floppy Drive Bay BIOS • (1) CD-ROM Drive Bay • DTI Enhanced Phoenix Core • (2) 3.5”, Front Accessible Drive Bays INTERFACES POWER SUPPLY • AGP Video - C&T 69030 • 150 Watt, AC or DC Input (front and rear connections) • Ethernet - Two Intel 82559 NICs COOLING • EIDE - Two Channels, ATA-33 • Multiple Fans for Card Cage and Power • USB, Floppy, Serial, Parallel Ports Supply • PS/2 Keyboard and Mouse Ports (front and rear connections) DIMENSIONS • Disk on Chip Support (up to 288 MB) • 1.75”H x 19”W x 21.25”D www.dtims.com Rev. 1.1 1.800.443.2667 July 2003 All trademarks and tradenames are the property of their respective owners. CRM120 1U Low Profile Platform Top Open The CRM120 is a fully integrated platform ide- Full and half duplex modes are supported. Device is found in the typical 1U rack-mount platform. The ally suited for situations where high performance in drivers are available for most popular operating sys- CRM120 includes two full length PCI slots and one a minimal amount of rack space is desired. The tems. half length PCI slot (the half length slot has card CRM120 provides the integrator with an abundance Other interfaces in the CRM120 include USB, bracket restrictions and is reserved for a future of features while still allowing for a large number of EIDE, floppy, serial, parallel, keyboard, and mouse RAID option). The CRM120 chassis includes a expansion slots in only 1U of rack space. ports. The two channel EIDE interface supports up power supply, drive bays, and cooling fans. The The CRM120 is built around a processor board to four devices which can operate in fast PIO and power supply is available with AC or DC power capable of running Intel's Celeron and Pentium III DMA modes. The floppy interface supports one input at 150 watts. The drive bays are all front CPUs in the FC-PGA package. The Celeron proces- drive. The serial and parallel port connections are accessible and include two 3.5 inch, one 5.25 inch, sor is supported in a single CPU configuration, available at the rear of the CRM120. The keyboard, and one floppy bay. Separate cooling fans for the while single or dual CPU configurations are avail- mouse, and USB ports are available at the front and card cage and power supply help ensure reliable able with the Pentium III processor. This allows the rear of the chassis. An optional solid state disk inter- operation in harsh environments. Front panel inter- CRM120 to effectively serve cost sensitive applica- face allows for operation without rotating media. faces include the keyboard, mouse, video, and USB tions as well as very high performance applications. The CRM120 provides system monitoring and connectors, status indicator LEDs, a reset switch, The CRM120 operates at either 66 or 100 MHz front security features. A dedicated microcontroller tracks and a power switch. Rear panel connections include side bus speeds. Intel's 440GX chipset is used for voltages, fan speeds, and processor temperatures. video, mouse, keyboard, parallel, and serial ports. the CRM120's core logic. The CRM120 supports up Multi-level alarms can be set to trigger based on Dry-contact relay closures are also provided for to 1.5 GB of memory. Three DIMM sockets are pro- selectable tolerances. Alarms can be reported exter- external monitoring of alarm conditions. vided and can be populated with standard PC-100 nally or to the host processor. A two-stage watchdog SDRAM memory modules. timer is also implemented to automatically recover The CRM120's full compliment of integration from software lockups. The CRM120 includes an includes an AGP video interface. The C&T 69030 interface to a Dallas Semiconductor I-Button. The I- graphics engine is designed into the CRM120 to Button provides a unique serial number and protect- provide full featured video with minimal power con- ed non-volatile storage which can be used to store sumption. The C&T 69030 includes 4 MB of video product license information. If a system must be memory. Contact DTI for availability. The video replaced in the field, the I-Button can be moved to All products are shipped FOB factory (MS). output is available at the front and rear of the the new system to transfer license information. The Specifications subject to change without notice. CRM120. implementation is similar to a "Dongle", except that Trademarks are the property of their respective owners. The CRM120 includes two Intel 82559 Ethernet the I-Button is internal to the chassis for added secu- Copyright 2001 by Diversified Technology. NICs. Both ports can operate at 10 or 100 Mbps rity. All rights reserved. over CAT-5 cable and are fully auto-negotiating. Expandability of the CRM120 far exceeds what www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157