m r A n i c i f f a r T l a n o i t a n r e t n I 365 Watt High Density Power Supply HD365 Series Product descriPtion 1.30” The HD365 Series of switching power supplies utilizes advanced component and circuit technologies to deliver the industry’s smallest 365 Watt switcher. The series has been designed for Medical, Telecom and Industrial Applications to satisfy 1U height considerations, the package measures only 3.00 x 5.00 x 1.30”. All models offer universal AC input with active power factor correction (PFC), flexible output configurations and compliance to worldwide safety and EMC standards. Features include: • 365W compact high-density models • The most power in the industry standard 3 x 5” Footprint 5.00” • Universal AC input with PFC • Low Profile / 1U Package 3.00” • Convection cooled operation up to 220 Watts • 12V / 1A Auxillary Output to power Fan • RoHS compliant • High efficiency operation of 90% (Typical) electromagnetic comPatibility inPut Electrostatic Discharge AC Input Voltage EN61000-4-2, ±4KV Contact / ±8KV Air Discharge 90-264VAC (47-63Hz) or 170-370 VDC Radiated Susceptibility Input Current EN61000-4-3, 26-1000MHz, 10V/M, 80% AM 4A Max Continuous EFT / Bursts Input Reflected Ripple EN61000-4-4, ±2KV FCC 68 part 15 Class B Surges Power Factor Correction EN61000-4-5, ±2KV Line-Earth, ±1KV Line-Line 0.98 at 220VAC (typical) Conducted Immunity Input Line Protection EN61000-4-6, 0.15-800MHz, 10V, 80% AM 6.3A 250VAC IEC Type Voltage Dips Hold-up Time EN61000-4-11, 95% Dip & 10ms, 30% Dip & 500ms >16msec @ Full Load Voltage Interruptions Efficiency EN61000-4-11, 95% Reduction, 5s 90% Typical Fluctuations & Flicker EN61000-3-3 Leakage 275uA @ 230 VAC (max) outPut environmental Line Regulation Operation Temperature ± 0.1% for Vin (min.) to Vin (max.) -20 ~ +50C Derate of 2.5%/C up to +70C Storage Temperature -20C ~ +85C Load Regulation V1 = ±1% / V2 = ±5% Max Cooling Forced Air Cooling 200LFM Adjustment Range ±5% Minimum 220W Max Convection Min. Load Requirement None Humidity Up to 95% RH Non-condensing Ripple ± 1% (20MHz) Shock & Vibration 0.75G Peak Half Sine, 6 Axes Transient Response Better than 5% For 50% Step Load MTBF >300,000 Hours Over-Voltage Protection 115-150% (Latched Shut-down) Turn-On Delay 1 Sec. Max. Initial Setting Accuracy ± 1% safety & emissions Over-Current 110-130% of I-Max (Auto-Recovery) Safety Approvals (pending) CSA/UL 22.2 No. 60950-1-M90 & 60601-1-M90 VDE EN60950-1 / EN60601-1 CE Mark (LVD) status / control Remote Sense Compensates for <250mV Drop PS Enable PS is off until Enable Signal (TTL or Ground) is applied DC OK Signal Goes TTL High to indicate DC Regulation 5V Standby 2.0A current, always on when AC input is present R 12V Auxiliary 1.0A current to power cooling fan(s) C US www.digipwr.com Digital Power Corporation Phone: (866) 344-7697 t n a i l p m o C s n o i t a l u g e R s m r A n i c i f f a r T l a n o i t a n r e t n I 365 Watt High Density Power Supply HD365 Series Model Selection Guide Model Output Standby Voltage Fan Voltage Note: HD365-112 12V @ 30.4A 5VSB @ 2.00A 12V @ 1.00A Total Power Not to exceed 365 Watts HD365-124 24V @ 15.2A 5VSB @ 2.00A 12V @ 1.00A Total Power Not to exceed 365 Watts HD365-148 48V @ 7.6A 5VSB @ 2.00A 12V @ 1.00A Total Power Not to exceed 365 Watts Contact factory for other voltage configurations. DC OK ENABLE Revision A: 3/23/09 All specifications subject to change. Please consult Digitial Power for latest specifications. Digital Power Corporation Phone (510) 657 2635 GreshAm Power telKoor Power North AmericA / AsiA 41324 Christy Street Fax (510) 657 6634 UK / eUroPe isrAel Fremont, CA 94538, USA sales@digipwr.com www.greshampower.com www.telkoor.com www.digipwr.com www.digipwr.com Digital Power Corporation Phone: (866) 344-7697 t n a i l p m o C s n o i t a l u g e R s