UPF600-148 - DIGITAL POWER

Description

Digital Power UPF600-148 Power Supply - Medical and ITE Grade 600 Watt Dual Output Power Switcher, Output Current 12.5 A

Part Number

UPF600-148

Price

Request Quote

Manufacturer

DIGITAL POWER

Lead Time

Request Quote

Category

PRODUCTS - U

Specifications

AC Fail

ACTIVE low 10 ms before loss of power with internal 3.3V reference voltage

AC Input Voltage

85–265 VAC wide range

Auxiliary Output

5 V / 500 mA

Conducted Immunity

EN61000-4-6, 0.15-800 MHz, 10V, 80% AM

Cooling

300 W free convection cooling, 600 W forced air cooling

Current Share

Single wire, ±10% accuracy

EFT/Bursts

EN61000-4-4, ±1 KV

Electrostatic Discharge

EN61000-4-2, ±4 KV contact / ±8 KV air discharge

Fluctuations & Flicker

EN61000-3-3

Hold-up time

16 ms @ full load

Humidity

Up to 95% RH non-condensing

Initial Setting Accuracy

± 0.5% maximum

Input Line Protection

10 A 250 VAC SLO BLOW IEC type

Input Reflected Ripple

FCC 68 part 15 Class B with external line filter

Line Regulation

± 0.1% for Vin (min.) to Vin (max.)

Load Regulation (V1)

± 0.5% maximum

Load Regulation (V2)

± 5% maximum V3 and V4: ±5% maximum

Min Load Requirement

None

MTBF

>300,000 hours

Operating Temperature

–25°C to 50°C (–13°F to 122°F); De-rate of 2.5% per 1°C to 70°C (34°F to 158°F)

Over-voltage Protection

120% typical latched shut-down

Overload Protection

Hiccup mode, 110% typical of maximum output load

Power Factor Correction

>0.98 typical @ 110/220 VAC input @ full load

Power OK

ACTIVE low and ACTIVE high with internal 3.3V reference voltage, indicates when main output volage drops more than 10%

Radiated Susceptibility

EN61000-4-3, 80 –1000MHz, 3 V/m, 80% AM

Remote Inhibit

ACTIVE low-output shut down

Remote sense

Compensates for

Ripple/noise

1% p-p maximum

Safety Approvals

IEC/EN/UL/cUL 60950-1 & 60601-1, CE Mark (LVD)

Shock & Vibration

0.75 G peak 5 Hz – 500 Hz

Storage Temperature

–25°C to 95°C (–13°F to 203°F)

Surges

EN61000-4-5, ±2 KV line-earth, ±1 KV line-line

Temperature Protection

Shutdown (internal heat-sink temp. >95°C/203°F) with auto recovery

Transient response

±5% max. deviation for load change of 25% to 75% at slew rate of 1A/usec, recovery time to 1% within 500 usec

Turn-on Delay

1 sec. maximum

Voltage Dips

EN61000-4-11, 30% dip for 10 ms, 60% dip for 100 ms

Voltage Interruptions

EN61000-4-11, 95% reduction for 5,000 ms

Features

350–600 watts
Digital PFC for accurate input power metering and inrush current control for AC and DCsystems
High efficiency operation of up to 90%
I²C interface provides for firmware uploads, status monitoring, and product data retrieval
L x W x H: 6.80 x 3.86 x 1.50” (17.27 x 9.80 x 3.81cm)
Low profile 1U height
O’ring diodes/FETs for redundant operation
Optional 36–72 VDC input range
Power density of 22 W/in.3
Single wire current share
Universal AC input (85–265 VAC) with active PFC for EN6100-3-2 compliance

Datasheet

Digital Power=UPS600=datasheet1-1110400989.pdf

1610 KiB

Download

Extracted Text

Open Frame Series – UPF600-1xx Medical and ITE Grade 600 Watt Dual Output Power Switcher Product Description The Digital Power Open Frame Series switching power supplies incorporate advanced component and circuit technologies to deliver the smallest 600 watt switchers in the industry. Designed to meet 1U height considerations, the devices’ U-Frame packages measure only 6.80 x 3.86 x 1.50”. Each model offers universal AC input (85–265 VAC) with active power factor correction (PFC), optional 48 VDC input, flexible output configurations, and compliance with worldwide safety and EMC standards. Key Features • High efficiency operation of up to 90% ENVIRONMENTAL CONDITIONS • Universal AC input (85–265 VAC) with active PFC for • Operating Temperature –25°C to 50°C (–13°F to 122°F); De-rate of 2.5% per 1°C to 70°C (34°F to 158°F) EN6100-3-2 compliance • Temperature Protection Shutdown (internal heat-sink temp. • 350–600 watts >95°C/203°F) with auto recovery 3 • Power density of 22 W/in. • Storage Temperature –25°C to 95°C (–13°F to 203°F) • Digital PFC for accurate input power metering and • Cooling 300 W free convection cooling, 600 W inrush current control for AC and DCsystems forced air cooling • O’ring diodes/FETs for redundant operation • Humidity Up to 95% RH non-condensing • Single wire current share • Shock & Vibration 0.75 G peak 5 Hz – 500 Hz • I²C interface provides for firmware uploads, status • MTBF >300,000 hours monitoring, and product data retrieval STATUS AND CONTROL • Optional 36–72 VDC input range • Remote Inhibit ACTIVE low-output shut down • Low profile 1U height • Power OK ACTIVE low and ACTIVE high with internal • L x W x H: 6.80 x 3.86 x 1.50” (17.27 x 9.80 x 3.81cm) 3.3V reference voltage, indicates when main output volage drops more than 10% INPUT • AC Fail ACTIVE low 10 ms before loss of power with internal 3.3V reference voltage • AC Input Voltage 85–265 VAC wide range • Current Share Single wire, ±10% accuracy • Input Inrush Current < 50 A @ 250 VAC cold start • Remote Sense Compensates for < 500 mV drop • Input Reflected Ripple FCC 68 part 15 Class B with external line filter • Auxiliary Output 5 V / 500 mA • Power Factor Correction >0.98 typical @ 110/220 VAC input @ full load • Input Line Protection 10 A 250 VAC SLO BLOW IEC type ELECTROMAGNETIC COMPATIBILITY • Hold-up Time 16 ms @ full load • Electrostatic Discharge EN61000-4-2, ±4 KV contact / ±8 KV air discharge • Radiated Susceptibility EN61000-4-3, 80 –1000MHz, 3 V/m, 80% AM OUTPUT • EFT/Bursts EN61000-4-4, ±1 KV • Line Regulation ± 0.1% for Vin (min.) to Vin (max.) • Surges EN61000-4-5, ±2 KV line-earth, ±1 KV line-line • Transient Response ±5% max. deviation for load change of • Conducted Immunity EN61000-4-6, 0.15-800 MHz, 10V, 80% AM 25% to 75% at slew rate of 1A/usec, • Voltage Dips EN61000-4-11, 30% dip for 10 ms, 60% dip for 100 ms recovery time to 1% within 500 usec • Voltage Interruptions EN61000-4-11, 95% reduction for 5,000 ms • Over-Voltage Protection 120% typical latched shut-down • Fluctuations & Flicker EN61000-3-3 • Load Regulation (V1) ± 0.5% maximum • Load Regulation (V2) ± 5% maximum SAFETY AND EMISSIONS V3 and V4: ±5% maximum IEC/EN/UL/cUL 60950-1 & 60601-1, CE • Min Load Requirement None • Safety Approvals Mark (LVD) • Turn-On Delay 1 sec. maximum • Initial setting Accuracy ± 0.5% maximum • Ripple/Noise 1% p-p maximum Hiccup mode, 110% typical of maximum output load • Overload Protection Phone: (866) 344-7697 | Website: www.digipwr.com | Email: sales@digipwr.com Model Selection Guide Open Frame Series – UPF600-1xx Medical and ITE Grade 600 Watt Dual Output Power Switcher Model Selection Guide Model Input Output Power Output Voltage Output Current Efficiency UPF600-112 85 – 265 VAC 600 W 12 VDC 50 A 90% typical at 230 UPF600-124 85 – 265 VAC 600 W 24 VDC 25 A VAC, 85% typical at 115 VAC UPF600-148 85 – 265 VAC 600 W 48 VDC 12.5 A J5 - OUTPUT CONNECTOR Pin Signal Name. Description 1 GA-0 I2C GEOGRAPHIC ADD. 2 GA-1 I2C GEOGRAPHIC ADD. 3 GA-2 I2C GEOGRAPHIC ADD. 4 CURRENT SHARE Current Share Signal 5 DC FAIL HIGH TTL Level - Active High 6 DC FAIL LOW TTL Level - Active Low 7 P- SENSE + Remote Sense 8 N - SENSE - Remote Sense 9 IPMB - SDA Serial Data I2C Option 10 IPMB - SCL Serial Clock I2C Option 11 External 3.3V External 3.3V for I2C 12 INHIBIT Active Low 13 AC_FAIL Active Low 14 RTN SIGNAL 5V Standby RTN 15 5V_OUT 5V Out 16 5V_OUT RTN 5V Out RTN North AmericA (heAdquArters) Toll Free: (866) 344-7697 europe Phone: +44 (0) 1722 413 060 Digital Power Corporation Phone: (510) 657-2635 Digital Power Limited Fax: +44 (0) 1722 413 034 Fax: (510) 353-4023 41324 Christy Street Salisbury, Wiltshire SP2 7PH, UK sales@greshampower.com Fremont, CA 94538, USA sales@digipwr.com Phone: (866) 344-7697 | Website: www.digipwr.com | Email: sales@digipwr.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products