DIGITAL POWER PS0812
Specifications
AC In Range
Green LED for AC OK
AC Input Voltage
90-264VAC, 47-63Hz
AC OK
Active Low - AC In Range
Adjustment range
±5% minimum
Auxillary Output
3.3V / 20mA per module
Conducted Immunity
EN61000-4-6, 0.15-800MHz, 10V, 80% AM
Cooling
2 Ball Bearing Fans Per Module
Current Share
Single Wire
DC Fail
Active Low - Fail
Efficiency
Up to 89% (230VAC and Full Load)
EFT / Bursts
EN61000-4-4, ±2KV
Electrostatic Discharge
EN61000-4-2, ±4KV Contact / ±8KV Air
EN55022
Class B (In Rack Mount Chassis)
Enable
Short Pin (last-mate / first break)
Fan Fail
Open Colletor, Active High
Fluctuations & Flicker
EN61000-3-3
Harmonics
EN61000-3-2 Level D
Hold-up time
> 20msec (Full Load & 110 VAC)
Hot-Swap Indication
Blue LED per ATCA STandards:Steady Blue-Power-ing Up or Ready for extraction, Blinking Blue-PS Hot-Swap in Process, Off - PS Operationg
Humidity
5~95% Non-Condensing
Input Fuse
Single 16A / 250 VAC Fuse Per Module
MTBF
>300k Hours (BellCore Gb 332 Issue 6 @ 30°C)
Operation Temperature
-10 ~ +70C, derate 2.5%/C up to 70°C max
Output In Range
Green LED for V1 output in range
Over Voltage Protection
110~130% of Nominal (shutdown)
Over-voltage Protection
110-125%
Overload Protection
105~120% of Module rating (autorecovery)
Power Factor Correction
>0.95 for EN61000-3-2 Class D
Radiated Susceptibility
EN61000-4-3, 26-1000MHz, 10V/M, 80% AM
REGULATION
± 0.4% Line / ± 0.5% Load
Remote Inhibit
Active Low - Off
Remote sense
Compensates for
Ripple @ Noise (V1)
1% pk-pk max per Module (20MHz)
Safety Approvals
UL/cUL 60950, EN60950, CE Mark (LVD)
Shock & Vibration
3 3 axes at 1 octave/min, 5 min dwell at 4 major, resonances at 0.75G peak, 5Hz to 500Hz.
Storage Temperature
-40 ~ +85°C
Surges
EN61000-4-5, ±2KV Line-Earth, ±1KV Line-Line
Temperature Protection
Internal Heatsink >90°C (auto-recovery)
Temperature Sensuor
Option For External Temperature Sensor
Voltage Dips
EN61000-4-11, 95% Dip & 10ms, 30% Dip & 500ms
Voltage Interruptions
EN61000-4-11, 95% Reduction, 5s
Features
- 12 / 24 / 48V Output Models
- 800~1500W Power Modules
- Analog Status & Control Signals
- Hot-Swap / Redundant Operation
- International Safety Approvals
- Optional Air Filter Attachment
- Optional I2C / IPMI Interface
- RoHS Compliant
- Univeral AC input with PFC
Datasheet
Extracted Text
m r A n i c i f f a r T l a n o i t a n r e t n I 800~1500W Modules / 3-Bay Power Shelf ATCA Power System Product descriPtion Digital Power’s ATCA Power System consists of up to three 1500 Watt Hot-Swap / Redundant Power Modules with a 1U High 19” Rack-Mount power shelf. These hot-swap / redundant power systems offer a full complement of status & control signals required by today’s leading edge systems. Features Include: • 800~1500W Power Modules • 12 / 24 / 48V Output Models • Univeral AC input with PFC • Hot-Swap / Redundant Operation • Analog Status & Control Signals • Optional I2C / IPMI Interface • Optional Air Filter Attachment • International Safety Approvals • RoHS Compliant inPut status & control AC Input Voltage Remote Inhibit 90-264VAC, 47-63Hz Active Low = Off InRush Current Enable <50A @ 250 VAC (Cold Start) Short Pin (last-mate / first break) Input Fuse DC Fail Single 16A / 250 VAC Fuse Per Module Active Low = Fail Power Factor Correction AC OK >0.95 for EN61000-3-2 Class D Active Low = AC In Range Hold-up Time Current Share > 20msec (Full Load & 110 VAC) Single Wire Efficiency Fan Fail Up to 89% (230VAC and Full Load) Open Colletor, Active High Remote Sense Compensates for < 250mV Drop (V1 Only) Auxillary Output 3.3V / 20mA per module outPut Temperature Sensuor Option For External Temperature Sensor Initial Setting Accuracy ±250mV Adjustment Range ±5% minimum Regulation visual indicators ± 0.4% Line / ± 0.5% Load Transient Response AC In Range <3%, recovers in < 1msec (50~100% Setp Load) Green LED for AC OK Over-Voltage Protection Output In Range 110-125% Green LED for V1 output in range Ripple @ Noise (V1) Hot-Swap Indication 1% pk-pk max per Module (20MHz) Blue LED per ATCA STandards: Overload Protection 105~120% of Module rating (autorecovery) - Steady Blue = Power-ing Up or Ready for extraction Over Voltage Protection 110~130% of Nominal (shutdown) - Blinking Blue = PS Hot-Swap in Process - Off = PS Operationg environmental electromagnetic comPatibility Operation Temperature -10 ~ +70C, derate 2.5%/C up to 70˚C max Temperature Protection Internal Heatsink >90˚C (auto-recovery) Electrostatic Discharge EN61000-4-2, ±4KV Contact / ±8KV Air Storage Temperature -40 ~ +85˚C Radiated Susceptibility EN61000-4-3, 26-1000MHz, 10V/M, 80% AM Cooling 2 Ball Bearing Fans Per Module EFT / Bursts EN61000-4-4, ±2KV Humidity 5~95% Non-Condensing Surges EN61000-4-5, ±2KV Line-Earth, ±1KV Line-Line Shock & Vibration 3 3 axes at 1 octave/min, 5 min dwell at 4 major Conducted Immunity EN61000-4-6, 0.15-800MHz, 10V, 80% AM resonances at 0.75G peak, 5Hz to 500Hz. Voltage Dips EN61000-4-11, 95% Dip & 10ms, 30% Dip & 500ms MTBF >300k Hours (BellCore Gb 332 Issue 6 @ 30˚C) Voltage Interruptions EN61000-4-11, 95% Reduction, 5s Fluctuations & Flicker EN61000-3-3 safety & emissions Harmonics EN61000-3-2 Level D Safety Approvals UL/cUL 60950, EN60950, CE Mark (LVD) EN55022 Class B (In Rack Mount Chassis) www.digipwr.com Digital Power Corporation Phone: (866) 344-7697 t n a i l p m o C s n o i t a l u g e R s m r A n i c i f f a r T l a n o i t a n r e t n I 800~1500W Modules / 3-Bay Power Shelf ATCA Power System Model Output Power Output Power Number Vout @ 115 VAC @ 230 VAC PS1548 48V 25A (1200W) 32A (1500W) PS1224 24V 37.5A (900W) 50A (1200W) PS0812 12V 50A (600W) 67A (800W) PS1200 3 Bay Power Shelf Power Module Outline Drawing: 38.00 6.50 2.60 43.60 POSITRONIC P/N: PCIH47M400A1 OR EQUIVALENT EXTRACTOR SOUTHCO P/N: P7-A-503-11 145.00 129.00 132.40 277.70 PEM P/N: PF11-M3-1 287.60 2 PLACES I/O Connections: Pin # Signal Name Remarks Pin # Signal Name Remarks Pin # Signal Name Remarks 1-6 -48V 48V Floating 24 SCL_B I2C bus B 36 AC_OK Open Collector Active High, indicates input line 7-12 -48V RTN 48V Floating 25 SDA_B I2C bus B 37 INHIBIT Power Supply ON/OFF switch connect to GND. 13 HA0 Pull up resistor will be in the PS card 26 5V_GND 38 I SHARE Single Wire N+1 up to 6 unit In Parallel 14 HA1 Pull up resistor will be in the PS card 27 EN Enable Shortest Pin 39 N-Sense -48V Remote Sense 15 HA2 Pull up resistor will be in the PS card 28 5V_GND 40 P-Sense -48V RTN Remote Sense 16 HA3 Pull up resistor will be in the PS card 29 GA0 Geographic Address Bit 0 41 3.3V 17 HA4 Pull up resistor will be in the PS card 30 GA1 Geographic Address Bit 1 42 5V_GND 18 HA5 Pull up resistor will be in the PS card 31 GA2 Geographic Address Bit 2 43 PTC_AdJ Option For External Temperature Sensor 19 HA6 Pull up resistor will be in the PS card 32 5V_Standby +3.3V 20mA Auxiliary Output 44 5V_PTC Option For External Temperature Sensor 20 HA7 Pull up resistor will be in the PS card 33 FAN_FAIL Open Collector Active High 45 F_GND Chassis Ground 21 5V_GND 34 PS_INT 46 PHASE AC Supply 22 SCL_A I2C bus A 35 PS_ALARM Open Collector of all alarms + Hot swap switch. 47 Neutral AC Supply 23 SDA_A I2C bus A Pull up resistor will be on the Carrier card. Revision A: 07/01/09 All specifications subject to change. Please consult Digitial Power for latest specifications. Digital Power Corporation Phone (510) 657 2635 GreshAm Power telKoor Power North AmericA / AsiA 41324 Christy Street Fax (510) 657 6634 UK / eUroPe isrAel Fremont, CA 94538, USA sales@digipwr.com www.greshampower.com www.telkoor.com www.digipwr.com www.digipwr.com Digital Power Corporation Phone: (866) 344-7697 t n a i l p m o C H.SWAP DC OK AC OK s n o i t a l u g e R s m r A n i c i f f a r T l a n o i t a n r e t n I 800~1500W Modules / 3-Bay Power Shelf ATCA Power System 3-Bay Power Shelf Outline Drawing: I/O Connections: 478.00 464.60 Pin # Signal Name 9.50 1 5V RTN 2 5V 3 48V RTN 4 5V PTC 5 48V RTN 146.00 6 EXIST2 7 EXIST1 8 EXIST0 9 N.C 10 PTC ADJ GROUNDING 95.00 11 PTC INTERNALLY SCREW M5 12 N.C 13 SCL- B 14 SDA_ B 15 SCL_ A 16 SDA- A 17 AC-OK 2 18 AC-OK 1 19 AC-OK 0 20 PS ALARM 2 21 PS ALARM 1 22 PA ALARM 0 23 INHIBIT 2 24 INHIBIT 1 25 INHIBIT 0 438.30 DSM-318-B-25-S-F-FB-RJ CONNECTOR Revision A: 07/01/09 All specifications subject to change. Please consult Digitial Power for latest specifications. Digital Power Corporation Phone (510) 657 2635 GreshAm Power telKoor Power North AmericA / AsiA 41324 Christy Street Fax (510) 657 6634 UK / eUroPe isrAel Fremont, CA 94538, USA sales@digipwr.com www.greshampower.com www.telkoor.com www.digipwr.com www.digipwr.com Digital Power Corporation Phone: (866) 344-7697 t n a i R 3.55 l p m o C 423.96 43.80 383.70 31.80 47.00 16.30 24.00 7.10 s n o i t a l u g e R s
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PS0812 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Digital Power PS-1138 Power Supply - 600 W output power, 16 channels of 12 V @ 7.6 A; 16 channels of...

Digital Power PS1200 Power Supply - 24V/50A 1200W Cassette, AC Wide Input Range Power Supply with Ba...

Digital Power PS1500 Power Supply - 48V/16.5A 800W Cassette I2C option available, AC Wide Input Rang...

Digital Power PS2180 Power Supply - 800~1500W Power Modules, 12 / 24 / 48V Output Models, Univeral A...

Digital Power PS-1872 Power Supply - High Voltage Power Supply 325 VDC 72 KW 24-U 19 in. AC-DC Front...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods