DIGITAL POWER eF306-427
Features
- +5V Standby
- 48VDC input optional
- 85% typical efficiency
- Active power factor correction (PFC)
- Inhibit
- Optional O-Ring diodes (V1,V2)
- Power OK
- Remote sense (V1, V2)
- Single-Wire Forced Current Sharing (V1, V2)
- Ultra-small 6.8" x 3.86" x 1.4" size
- Up to 4 outputs
Datasheet
Extracted Text
eF306 Series Universal Input Power Factor Corrected 300 Watt Switchers Features: • Ultra-small 6.8" x 3.86" x 1.4" size • 85% typical efficiency • Active power factor correction (PFC) • Up to 4 outputs • +5V Standby • 48VDC input optional • Remote sense (V1, V2) • Single-Wire Forced Current Sharing (V1, V2) • Optional O-Ring diodes (V1,V2) • Power OK • Inhibit • UL, cUL, TUV, CE The eF306 series are the industry's smallest open frame switchers that deliver up to 300W continuous or 340W The very high efficiency and power density results from peak from one to four outputs. The supply includes active the use of advanced component and circuit technologies power factor correction and 90-250Vac universal input, such as synchronous rectification, low profile making it ideal for use worldwide. transformers and SMT components. Available models Output Current Ratings 1 2 3 4 Model Number Output Output Voltage Min Max Max (I) Peak m V1 +5V 0A 20A 40A 45A V2 +12V 0A 6A 12A 15A eF306-401 V3 +12V 0A 1.5A 4A 5A V4* -5V 0A 1A 1.5A 2A V1 +5V 0A 20A 40A 45A V2 +5V 0A 15A 30A 35A eF306-427 V3 +12V 0A 1.5A 4A 5A V4* -12V 0A 1A 1.5A 2A V1 +5V 0A 20A 40A 45A V2 +3.3V 0A 20A 40A 45A eF306-433 V3 +12V 0A 1.5A 4A 5A V4* -12V 0A 1A 1.5A 2A V1 +2.5V 0A 20A 50A 55A V2 +3.3V 0A 20A 40A 45A eF306-487 V3 +12V 0A 1.5A 1.5A 2A V4* +5V 0A 1A 3A 3.3A V1 +1.5V 0A 20A 50A 55A V2 +3.3V 0A 20A 40A 45A eF306-489 V3 +12V 0A 1.5A 4A 5A V4* -12V 0A 1A 1.5A 2A eFO306-133 V1 +3.3V 0A 25A 50A 55A eFO306-112 V1 +12V 0A 14A 29A 34A eFO306-115 V1 +15V 0A 11A 23A 30A eFO306-124 V1 +24V 0A 8.3A 14.5A 16A eFO306-128 V1 +28V 0A 6A 12.5A 14A eFO306-148 V1 +48V 0A 4.1A 7.2A 8A * V4- Floating DIGITAL POWER CORPORATION 41920 CHRISTY STREET FREMONT CALIFORNIA 94538-3158 TEL: 510-657-2635 TOO FREE: 866-344-7697 FAX: 510-657-6634 WWW.DIGIPWR.COM 1. No minimum load required to maintain stated regulation. 2. Convection cooling. 3. Forced air cooling. 4. Peak output, 30 sec max 5. V1, V2 outputs tied together & I share bus outputs tied together. Note: Add “O” to series prefix for optional O-Ring diodes, example EFO306-XXX Input 90-250VAC rated Input Voltage Range 85-265VAC Max. operation Input Frequency 47 to 440Hz Input Operating Current 4.2A rms @ 90Vac, 300W output Inrush Current 50A max, cold start @ 25ºC, 250Vac Efficiency 82% typ at 115Vac full load, 85% typ at 230Vac full load Power Factor 0.98 typ at 230Vac full load, 0.99 typ at 115Vac full load Input protection Internal Line Fuse IEC type 6.3A 250Vac SLO BLO Brown Out 75 to 300Vac Output 150W free convection cooling (base plate cooling) Output Power 300W forced air cooling (250LFM, or 15CFM min.) 340W peak +5V Standby +5V@ 50mA max. Line Regulation ± ± 0.1% for Vin (Min) to Vin (Max). ± ± V1 & V2 ± ± ± ± 0.5% for load change from zero to full load Load Regulation V3 & V4 ± ± ± ± 2% for 10% to 100% of Im on V1 & V2 ± ± ± ± 5% for 0% to 100% of Im on V1 & V2 V1 - 75 mVp-p Max. Ripple and Noise V2 - 50 mVp-p Max. V3 & V4 - 120mVp-p Max Output voltage adjustment range V1& V2 only ± ± ± ± 10% Initial setp point tolerance 5.1 ± ± ± ± 20mV 3.35 ± ± ± ± 10mV Overshoot & Undershoot Less than 1% at turn ON-OFF ± ± ± ± 5% Max. deviation for load change of 25% to 75% , at slew rate of Transient Load Response 1A/usec, recovery time less then 500Msec Turn-on delay 2 sec. Maximum Hold-Up Time 20msec minimum at 110Vac and full load Turn-On Rise Time 20Msec Max Turn-On Sequencing All outputs same time with priority to the 5V DIGITAL POWER CORPORATION 41920 CHRISTY STREET FREMONT CALIFORNIA 94538-3158 TEL: 510-657-2635 TOO FREE: 866-344-7697 FAX: 510-657-6634 WWW.DIGIPWR.COM V1 & V2 120 to 130% of Im, constant current limit, automatic recovery Overcurrent Protection V3 & V4 120 to 180% of Im constant current limit, automatic recovery V1, V2 & V3 outputs shut down at 125% of nominal, AC input must Overvoltage Protection recycled to reset Shutdown due to excessive internal temperature 90 to 97° ° ° °C (base plate) Temperature Protection automatic recovery Current Share Available on V1 & V2 only N+1 single wire Hot-Swap Internal O-Ring diode optional V1 & V2 only compensate for voltage drops of up to 0.5V. Outputs are Remote Sense internally sensed if loads open Control Enhibit Active low, all outputs shut down Power OK Open collector active low when any of the outputs drop below 10%. Environmental Operating: -5° °C to +50° °C (derating linearly to 70 ° °C with 50% derating). ° ° ° ° ° ° Temperature -40° ° ° °C to +50° ° ° °C optional Storage: -25° ° ° °C to +85° ° ° °C Temperature Coefficient 0 to 70° ° ° °C ± ± ± ± 0.02%/° ° ° °C 150W free convection cooling (base plate cooling). Cooling 300W,340W peak forced air cooling (250LFM, or 15CFM min.) Humidity Maximum 5% to 95% RH non-condensating Altitude Operating 10,000 ft. Non- operating 40,000 ft Three orthogonal axes at 1 octave/min, 5 min dwell at four major resonances Vibration at 0.75G peak, 5Hz to 500Hz Input to case: 1500VAC Dielectric Withstand Input to output: 3000VAC Output to case: 500 VDC UL 1950 CSA C22.2 -234, LEVEL 3, EN-60950, CLASS 1, SELV., TUV Safety Agency Compliance CE - MARK Leakage current 1mA 300,000 hours minimum per BELCORE 332, issue 6 specification @ 30 MTBF degrees C. (Max. junction temperature 110° ° ° °C ,Capacitors 105° ° ° °C) Mechanical Dimensions Size 173 x 98 x 35.5(mm) (6.8” x 3.85” x 1.4”) Weight 850 gr. Max. (31.5 oz) Specifications are typical at 25ºC unless otherwise designated DIGITAL POWER CORPORATION 41920 CHRISTY STREET FREMONT CALIFORNIA 94538-3158 TEL: 510-657-2635 TOO FREE: 866-344-7697 FAX: 510-657-6634 WWW.DIGIPWR.COM Multi-Output Mechanical Drawing Single Output Mechanical Drawing Specifications are subject to change without prior notice DIGITAL POWER CORPORATION 41920 CHRISTY STREET FREMONT CALIFORNIA 94538-3158 TEL: 510-657-2635 TOO FREE: 866-344-7697 FAX: 510-657-6634 WWW.DIGIPWR.COM
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the eF306-427 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods