CPCI-DC-6U-400/48 - DIGITAL POWER

Image of DIGITAL POWER CPCI-DC-6U-400/48

Description

Digital Power CPCI-DC-6U-400/48 400 W CompactPCI Power Supply; 36-72 VDC Input with V1: +5 V/50 A V2: +3.3 V/80 A V3: +12 V/7.5 A and V4: -12 V/1.5 A DC Outputs.

Part Number

CPCI-DC-6U-400/48

Price

Request Quote

Manufacturer

DIGITAL POWER

Lead Time

Request Quote

Category

PRODUCTS - C

Specifications

Conducted Immunity

EN61000-4-6, 0.15–800 MHz, 10 V,80% AM

Cooling

400–500 W-250LFM/600–650 W

Current Share

Single wire (V1 and V2)

DC Fail

Open collector ACTIVE low

EFT/Bursts

EN61000-4-4, ±2 KV

Electrostatic Discharge

EN61000-4-2, ±KV contact / ±8KV air discharge

Emissions

EN55022 Level B

Fluctuations & Flicker

EN61000-3-3

Front Panel Green LED

Outputs OK

Front Panel Red LED

Fault condition

Hold-up time

16 ms minimum (full load)

Humidity

400–500 W-250LFM/600–650 W

Initial Setting Accuracy

±1%

Input—24 V Input Models

18–36 VDC Input range

Input—48 V Input Models

36–72 VDC Input range

Input—AC Models

90–264 VAC, 47–63 Hz

Line Regulation

±0.5% for minimum to maximum voltage input

Load Regulation

V1 and V2: ±1% maximum V3 and V4: ±5% maximum

Min Load Requirement

None

MTBF

>400,000 hours per Belcore 332 issue 6

Operating Temperature

–5°C to 55°C (23°F to 131°F); De-rate of 2.5% per 1°C to 70°C (34°F to 158°F)

Over Temperature Warning

Open collector ACTIVE low

Over-voltage Protection

110–125% of V1/V2/V3 (latched shutdown)

Overload Protection

V1 and V2: 125% / V3 and V4: 200%

Power Factor

>0.90/0.95 typical @ 110/220 VAC (full load)

Radiated Susceptibility

EN61000-4-3, 26–1000 MHz, 10V/m, 80% AM

Remote Inhibit

Active Low - Off

Remote sense

Compensates for

Ripple/noise

V1 and V2: 60 mV, V3 and V4: 120mV (20M Hz bandwidth)

Safety Approvals

UL/cUL 60950-1, IEC/EN 60950-1

Shock & Vibration

Up to 95% RH non-condensing

Storage Temperature

–40°C to 85°C (–40°F to 185°F)

Surges

EN61000-4-5, ±2 KV line-earth, ±1KV line-line

Transient response

>0.90/0.95 typical @ 110/220 VAC (full load)

Turn-on Delay

2 seconds maximum

Voltage Dips

EN61000-4-11, 30% dip for 10 ms, 60% Dip for 100 ms

Voltage Interruptions

EN61000-4-11, 95% reduction, 5 seconds

Features

24 VDC and 48 VDC input models available
350–650 watts
6U cabinet
Active load current share (+5 V and 3.3 V output)
International regulatory approvals
O’ring diodes/FETs for N+1 parallel operation
PICMG 2.11 compliant
RoHS compliant
Ruggedized construction
Universal AC input with PFC

Datasheet

Digital Power=CPCI-AC-6U-400=datasheet1-1113657701.pdf

1375 KiB

Download

Extracted Text

CPCI-6U Series 350 – 650 Watt Compact PCI Power Supply Product Description The Digital Power CPCI 6U Series power supplies offer industry- leading performance for the Military, Commercial, Telecom and Industries markets, with a full range of AC Input, 24 VDC and 48 VDC input products. The entire range of products are compliant to the PICMG 2.11 power interface speciation and provide from 350-650 Watts of output power. Key features include: Key Features • 350–650 watts • 6U cabinet • Ruggedized construction • Universal AC input with PFC • 24 VDC and 48 VDC input models available • Active load current share (+5 V and 3.3 V output) • O’ring diodes/FETs for N+1 parallel operation • RoHS compliant • PICMG 2.11 compliant • International regulatory approvals INPUT STATUS AND CONTROL • Input—AC Models 90–264 VAC, 47–63 Hz • Remote Inhibit Active Low = Off - Power Factor >0.90/0.95 typical @ 110/220 VAC (full load) • DC Fail Open collector ACTIVE low • Over Temperature Warning Open collector ACTIVE low - Hold-Up Time 16 ms minimum (full load) - Inrush Current <35/65 A @ 110/230 VAC • Remote Sense Compensates for < 500 mV drop • Current Share Single wire (V1 and V2) • Input—48 V Input Models 36–72 VDC Input range • Front Panel Green LED Outputs OK • Input—24 V Input Models 18–36 VDC Input range • Front Panel Red LED Fault condition OUTPUT ELECTROMAGNETIC COMPATIBILITY • Line Regulation ±0.5% for minimum to maximum voltage input • Electrostatic Discharge EN61000-4-2, ±KV contact / ±8KV air discharge • Transient Response >0.90/0.95 typical @ 110/220 VAC (full load) • Radiated Susceptibility EN61000-4-3, 26–1000 MHz, 10V/m, 80% AM • Over-Voltage Protection 110–125% of V1/V2/V3 (latched shutdown) • EFT/Bursts EN61000-4-4, ±2 KV • Overload Protection V1 and V2: 125% / V3 and V4: 200% • Surges EN61000-4-5, ±2 KV line-earth, ±1KV line-line • Load Regulation V1 and V2: ±1% maximum • Conducted Immunity EN61000-4-6, 0.15–800 MHz, 10 V,80% AM V3 and V4: ±5% maximum • Voltage Dips EN61000-4-11, 30% dip for 10 ms, 60% Dip for 100 ms • Min Load Requirement None • Voltage Interruptions EN61000-4-11, 95% reduction, 5 seconds • Turn-On Delay 2 seconds maximum • Fluctuations & Flicker EN61000-3-3 • Initial setting Accuracy ±1% • Ripple/Noise V1 and V2: 60 mV V3 and V4: 120mV (20M Hz bandwidth) ENVIRONMENTAL CONDITIONS SAFETY AND EMISSIONS • Operating Temperature –5°C to 55°C (23°F to 131°F); • Safety Approvals UL/cUL 60950-1, IEC/EN 60950-1 De-rate of 2.5% per 1°C to 70°C (34°F to 158°F) • Emissions EN55022 Level B • Storage Temperature –40°C to 85°C (–40°F to 185°F) • Cooling 400–500 W = 250LFM/600–650 W=400 LFM airflow • Humidity 400–500 W = 250LFM/600–650 W=400 LFM airflow • Shock & Vibration Up to 95% RH non-condensing • MTBF >400,000 hours per Belcore 332 issue 6 Phone: (866) 344-7697 | Website: www.digipwr.com | Email: sales@digipwr.com Model Selection Guide CPCI-6U Series 350 – 650 Watt Compact PCI Power Supply Model Selection Guide Model Input Power V1 V2 V3 V4 CPCI-AC-6U-400 90–264 VAC 400 W +5 V/50 A +3.3 V/80 A +12 V/7.5 A –12 V/1.5 A CPCI-AC-6U-500 90–264 VAC 500 W +5 V/65 A +3.3 V/80 A +12 V/12 A –12 V/1.5 A CPCI-AC-6U-600 90–264 VAC 600 W +5 V/70 A +3.3 V/70 A +12 V/7 A –12 V/1.5 A CPCI-AC-6U-650 90–264 VAC 650 W +5 V/80 A +3.3 V/70 A +12 V/7 A –12 V/1.5 A CPCI-DC-6U-350/24 18–36 VDC 350 W +5 V/50 A +3.3 V/60 A +12 V/7 A –12 V/1.5 A CPCI-DC-6U-400/48 36–72 VDC 400 W +5 V/50 A +3.3 V/80 A +12 V/7.5 A –12 V/1.5 A CPCI-DC-6U-500/48 36–72 VDC 500 W +5 V/65 A +3.3 V/80 A +12 V/12 A –12 V/1.5 A CPCI-DC-6U-600/48 36–72 VDC 600 W +5 V/70 A +3.3 V/70 A +12 V/7 A –12 V/1.5 A CPCI-DC-6U-650/48 36–72 VDC 650 W +5 V/80 A +3.3 V/70 A +12 V/7 A –12 V/1.5 A North AmericA (heAdquArters) Toll Free: (866) 344-7697 europe Phone: +44 (0) 1722 413 060 Digital Power Corporation Phone: (510) 657-2635 Digital Power Limited Fax: +44 (0) 1722 413 034 Fax: (510) 353-4023 41324 Christy Street Salisbury, Wiltshire SP2 7PH, UK sales@greshampower.com Fremont, CA 94538, USA sales@digipwr.com Phone: (866) 344-7697 | Website: www.digipwr.com | Email: sales@digipwr.com

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products