Water Flow LEMA 1600HE SOLENOID ACTUATOR STEP 6: Splice the solenoid actuator wires and connect the incoming direct burial color code INTRODUCTION (hot) wire to the red wire from the solenoid actuator using a dry-splice waterproof connector. Loop the incoming white common wire to the white wire from the solenoid actuator using THANK YOU for the purchase of DIG’s LEMA 1600HE solenoid actuator. The LEMA 1600HE is conventional dry-splice waterproof wire connectors. Leave the wires slightly loose on each designed to be used in conjunction with all models of the LEIT ambient controllers. The LEMA side so that repairs, if needed, can be carried out easily. 1600HE is an encapsulated, zero maintenance, high-efficiency, watertight, 2-way magnetic solenoid actuator that requires minimal power to operate with the LEIT series controllers. The LEMA 1600HE can be installed with the LEMA adapters, allowing conversion of most brand name valves. SPECIFICATIONS MAXIMUM WIRE RUNS: 14 AWG 4,500 feet (1365 m) 12 AWG 7,500 feet (2272 m) VALVE ADAPTERS DIG valve adapters are compatible with the following valves: A — MODEL 30- 920 ADAPTOR FITS THE FOLLOWING VALVES: Irritrol 100, 200B, 205, 217B, 700 and 2400, 2500, 2600 series Toro P220, 252 and 220 series brass valves NOTE: Maximum operating pressure up to 150 psi Bermad 200 series HIT 500 series Superior 950 STEP 7: After installation is completed, turn the water Griswold 2000 and DW Hunter HBV supply on to pressurize the main line checking that all valves are operating correctly. The valves should open B — MODEL 30- 921 ADAPTOR FITS THE FOLLOWING VALVES: momentarily and shut off. Rain Bird DV, DVF, PGA, PEB, GB, EFB, BPE, PESB and ASVF valves Test each valve in manual operation by turning C — MODEL 30- 922 ADAPTOR FITS THE FOLLOWING VALVES: the sleeve/handle to the right to open and Hunter ASV, HPV, ICV, PGV and AS VF Series valves MANUAL OFF MANUAL ON to the left to close. D — MODEL 30- 923 ADAPTOR FITS THE FOLLOWING VALVES: *Note: if the valve remains open in manual operation, you may need to examine the adaptor Weathermatic 12000, 21000 series and the sleeve to see that they are installed correctly and the adaptor is firmly secured A B C D Please note that the LEMA solenoid actuator operates only with 2-way normally closed valves O-ring 200-015 O-ring 200-021 R-ring 200-014 model # 30-494 O-ring 200-012 model # 03-077 IMPORTANT: Do not over tighten the LEMA solenoid actuator to the valve model # 30-494 Long sleeve model # 30-495 Sleeve CAUTION: For all brand name valves with a manual bleed lever, make sure the lever is in model # 30-424 Long sleeve model #30-424 closed position. Do not move the lever after installing the actuator and the valve adapter. It model # 30-423 the manual lever on the valve is used it can damage the adapter or the sleeve causing the valve to stay open. INSTALLATION OF LEMA 1600HE (2-WAY) SOLENOID WARNING: LEMA solenoid actuators must not be tested with any AC valve tester or DC tester over 9-volts. If you do so, it will cause irreparable damage to the LEMA solenoid actuator and Select the appropriate adaptor for the valve(s) that will be used (see list above) the controller unit. Testing the solenoids with equipment rated higher then 9-volts will void the warranty STEP 1: Shut off main line to the valve. If you are having a problem installing the LEMA solenoid actuator to your valve, contact: STEP 2: Unscrew the conventional solenoid from the valve and remove the solenoid housing, DIG CUSTOMER SERVICE AT 1 (800) 322-9146 solenoid stem, plunger, spring, and “o” ring (if necessary). WARRANTY: DIG Corporation guarantees to its customers who have purchased DIG professional irrigation STEP 3 STEP 4 products including LEIT controllers, solenoids and LEIT accessories that the products will be free from original STEP 3: Thread and tighten the defects in material and workmanship under normal use for a period of three (3) years, from the date of conversion adapter clockwise to the original manufacture. If any apparent defect arises under normal use and service in the DIG product within the warranty period, DIG at its sole discretion, shall have the option to repair or replace part or all of the compatible valve port, do not over original product, free of charge after return of such product at user expense, authorized in writing by DIG tighten (no tool needed) Corporation. If a product is replaced, the replacement product will be covered for the remainder of the warranty period dating from the original purchase. This warranty applies only to the DIG Corporation STEP 4: Make sure that the solenoid professional irrigation products, which are installed as specified and used for irrigation purposes. This warranty applies only to products, which have not been altered, modified, damaged, misused or misapplied. holder/ handle is not inserted into the This warranty does not cover products adversely affected by the system into which the products are solenoid housing, and then screw the incorporated, including improperly designed, installed, operated, or maintained systems. This warranty does LEMA 1600HE assembly into the not apply to blockage of solenoids, valves, drip line, drippers and microsprinklers due to use of water containing corrosive chemicals, electrolytes, sand, dirt, silt, rust, scale, algae, bacterial slime or other organic correct adapter. Firmly tighten the contaminants. Tampering with a product (including, but not limited to attempting to disassemble a LEIT solenoid by hand, but do not over controller) will void any warranty the product might otherwise be eligible for. In no event shall DIG's liability tighten. exceed the selling price of the product. DIG is not liable for consequential, incidental, indirect or special damages, including but not limited to the labor to inspect, remove or replace products, vegetation loss, loss of STEP 5 energy or water, cost of substitute equipment or services, property damage, loss of use or loss of profits; nor is DIG liable for economic losses, consequential damages or damage to property arising out of installer's negligence or based on strict liability in tort. The user and/or trade customer agrees to the limitations and exclusions of liability of this warranty by purchase or use of DIG products. No representative, agent, distributor or other person has the authority to waive, alter, or add to the printed provisions of this warranty, or to make any representation of warranty not contained here. Some states do not permit the exclusion or limitation of incidental or consequential damages or of implied warranties. Therefore, some of the above exclusions or limitations may not apply to you. This warranty on DIG professional irrigation products is given expressly and in place of all other expressed or implied warranties of merchantability and fitness for a particular purpose, and this warranty is the only warranty on the professional irrigation products made by DIG Corporation. http://www.digcorp.com E 1210 Activity Drive STEP 5: Slip the LEMA 1600HE sleeve/handle into the solenoid housing (see steps below.) e-mail: dig@digcorp.com Positioning the solenoid handle at a 40°-45° angel towards the valve creates a manual lever; Printed in the USA 012006 DIG CORP 26-401 Vista, CA 92081-8510, USA helpful for manual on/off Hot Common