Datasheet IP Network Interface Card ® Dialogic IP Network Interface Series 3 Card ® The Dialogic IP Network Interface Series 3 Card is an IP plug-in line ® card for the Dialogic Converged Services Platforms (CSP). It enables the CSP Platforms to support IP, performing two-way gateway conversion between circuit-switched and packet-switched media. Developers can use the IPN Series 3 Card to build revenue-generating voice, fax, and modem-over-IP services in which a CSP Platform acts as a gateway or media server in a converged services network. The IPN Series 3 Card transcodes data from PCM to packet technology, compresses it, and provides silence suppression, echo cancellation, and jitter buffering to improve quality. The IPN Series 3 Card, along with SIP and H.323 signaling, provides a true gateway environment, enabling developers to deliver an application server, signaling engine, gateway, and media server, all in a single system. This uniŢed architecture can translate into signiŢcant cost savings, reduced development time, and simpliŢed operation for developers and service providers. Features Benefits Supports up to 1024 IP media ports without compression Provides a high-density IP environment, and supports (G.711 only), and up to 512 ports with compression popular IP coders to facilitate transcoding when interfacing (G.723.1, G.726, G.729, and T.38 fax) providing DTMF with between different IP networks RFC 2833 support Supports trafŢc load sharing among IP Series 3 Cards Increases the availability and reliability of a service Supports two 100 MB/s Ethernet ports, conŢgured as a Link Provides high availability and redundancy in case of an Aggregate Group Ethernet port failure Dynamic coder change Allows ţexibility in coder use, and dynamically changing coders during a call can optimize voice quality Provides up to 4096 gateway ports Increases the service capacity of a gateway application New coders can be added via software load Enables the introduction of coders without system re-design, allowing new coders to be added on existing technology as required to meet market needs ® Datasheet Dialogic IP Network Interface Series 3 Card Technical Specifications Architecture Overview 2 VoIP modules per card and 2 external 100 Mbps Ethernet ports Supports fax relay via T.38, as well as fax and modem in either transparent or bypass conŢgurations Supports multiple resource proŢles, deŢning the terminal capabilities for a VoIP endpoint (each VoIP module is considered an endpoint), including: — Maximum number of spans — List of supported coders and packet rates — Size of a channel’s jitter buffer — Size of a channel’s echo cancellation tail length — Features including fax, modem, or digit relay, and RTP redundancy Integrated Services Coders Selectable coders; G.711, G.723.1, G.726, G.729 Group 3 Fax Relay via ITU-T.38 DTMF digit relay via RFC2833 RTP redundancy via RFC2198 Adaptive jitter buffer Echo cancellation (G.168 compliant) Silence suppression Comfort noise generation Electrical Requirements Supply Voltage, Vcc: 5.00 V Supply Current, Vcc @ 5.0 V: 6.25 A (typical) with two modules; 4.5A (typical) with one module Physical Specifications Height: 236.2 mm (9.3 in.); 318.5 mm (12.54 in.) I/O card Width: 317.5 mm (12.5 in.); 105.2 mm (4.14 in.) I/O card Depth: 19.7 mm (.775 in.); 19.7 mm (0.775 in.) I/O card Environmental Requirements Temperature (Storage): -40°C to 70°C (-40°F to 158°F) Temperature (Operation): 0°C to 50°C (32°F to 122°F) Temperature Shock (Operation): 0°C to 50°C (32°F to 122°F) at 10°C/hr. Humidity (Operating): 5% to 85% Altitude: Up to 4,000m (13,123 ft.) Licensing ® Dialogic IP Network Interface Series 3 Cards are available in one and two module options with licensing for incremental growth Approvals and Compliance For information about RoHS compliance and global approvals, contact your Dialogic sales representative. Telecom Approvals United States: FCC Part 15; CSA 60950-1-03 Canada: ICES 003; CSA 22.2 No. 950 NEBS: Level 3 European Union: CE Mark Reliability/Warranty MTBF information available upon request. Warranty information at http://www.dialogic.com/warranties 2 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 Dialogic and Switchkit are registered trademarks of Dialogic Corporation or its subsidiaries (“Dialogic”). Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at the address provided above. The names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. No licenses or warranties of any kind are provided under this datasheet. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Copyright © 2007 Dialogic Corporation All rights reserved. 12/07 10828-01 www.dialogic.com