DIALOGIC IMG 1004
Specifications
Network Interface
Telephony: T1 and E1 IP: 2 - Fast Ethernet for control, signaling, and media T1/E1s for timing (BITS clock) and signaling Loop timing via any telephony port
Quality of Service
Adaptive jitter buffer Packet loss compensation Configurable Type of Service (ToS) fields for packet prioritization and routing
Features
- Allows easy scalability to 128 channels in a small footprint
- Can reduce complexity and administrative overhead for VoIP services, and allows on-the-fly voice coder conversion
- Carrier-grade design uses dual Ethernet network interfaces
- Enables fast connection time and lower phone charges because callers can connect to each other directly without using the PSTN
- Optimizes distribution of SIP traffic and improves scalability and fault tolerance
- Provides a flexible, cost-effective platform that can evolve from TDM-IP to all IP
- Provides high reliability and service availability
- Simultaneous support for PRI, CAS, and SS7 CICs along with SIP and H.323
- Supports up to 128 channels in a 1U chassis
- TDM signaling, call routing, call translation, and IP transcoding supported in a single chassis
- Wireline and wireless support, including ENUM
- Works with load balancers
Datasheet
Extracted Text
® Datasheet Dialogic IMG 1004 Integrated Media Gateway Media Gateway ® Dialogic IMG 1004 Integrated Media Gateway is a carrier- grade VoIP gateway that supports both media and signaling in a single chassis. It allows service providers to add new telephony services quickly, and gives them a clear migration path to an all-IP network. The IMG 1004 brings the value proposition of an integrated media gateway into the low-density (1-4 span) gateway market. The IMG 1004 provides any-to-any voice network connectivity and can work in tandem with the IMG 1010 to deliver SIP services into legacy PRI, CAS, and SS7 networks, as well as IP-to-IP transcoding for network peering applications. Its compact 1U design, integrated SS7 links termination and CICs, GUI-based management, and software licensing for in- service capacity expansion make the IMG 1004 an excellent Large Logo option for VoIP. ® The IMG 1004 also features the Dialogic Programmable Protocol Language (PPL), which allows rapid implementation of ISDN PRI variants and other signaling changes. Features Benefits Simultaneous support for PRI, CAS, and SS7 CICs along with Provides a flexible, cost-effective platform that can evolve SIP and H.323 from TDM-IP to all IP SS7 ISUP links termination, TDM signaling, call routing, call Can reduce complexity and administrative overhead for VoIP translation, and IP transcoding supported in a single chassis services, and allows on-the-fly voice coder conversion Supports up to 128 channels in a 1U chassis Allows easy scalability to 128 channels in a small footprint Wireline and wireless support, including ENUM Enables fast connection time and lower phone charges because callers can connect to each other directly without using the PSTN Medium Logo Carrier-grade design uses dual Ethernet network interfaces Provides high reliability and service availability Works with load balancers Optimizes distribution of SIP traffic and improves scalability and fault tolerance To find out more about Dialogic call 800.755.4444 or visit us at: www.dialogic.com Small Logo ® Datasheet Dialogic IMG 1004 Integrated Media Gateway Media Gateway Technical Specifications Routing Features Call routing and translation based on ANI, DNIS, and Nature of Address, Time of Day, Day of Week/Year Pre- and post-routing digit translations Multiple routing algorithms per trunk group or groups of trunks for IP-to-TDM and IP-to-IP, both A-law and µ-law conversions Pre-call announcement (branding) IP Bearer Features Coder support: AMR, iLBC, G.711, G.723.1, G.729 A/B, G.729 E/G, GSM-FR, G.726 Echo cancellation: G.168 128 ms tail length Voice activity detection Comfort noise generation T.38 Real Time Fax Fax/modem bypass Digit transmission via RFC 2833 (SIP and H.323) or H.245 UII (H.323) Symmetric NAT Traversal OAM&P Centralized Element Management System GUI-based system allows monitoring and provisioning of up to 32 gateways Node wizard for simplified configuration Centralized routing engine simultaneously configures gateways in the network Radius (billing, authentication, prepaid) Local time zone support and Network Time Protocol (NTP) SNMP MIBs: MIB-2, Interface, Alarms, DS0, DS1 MRTG and Cacti reporting Power Requirements 120 - 240 VAC 50/60 Hz with voltage range (90 V to 240 V) Power consumption: 30 W 2 ® Datasheet Dialogic IMG 1004 Integrated Media Gateway Media Gateway Technical Specifications (continued) Physical Specifications Dimensions: 1.72 in. high (43.7 mm) x 17.25 in. wide (438.2 mm) x 11.00 in. deep (279.0 mm) Weight: 9.1 lb (4.12 kg) Resiliency Local termination of ISUP links and IP backhaul to IMG 1010 signaling node Redundant Element Management System servers Graceful software upgrade over multiple IMG 1004s Graceful busy out per trunk group Virtual IP addresses for SIP load balancing (via third party server) Call Release due to media inactivity timeouts Capacity 32 - 128 TDM channels per 1U shelf (scalable from 1 E1/ 1 T1 to 4 E1 / 4 T1) 32 - 128 VoIP channels per 1U shelf I/O Interfaces Telephony: T1 and E1 IP: 2 - Fast Ethernet for control, signaling, and media T1/E1s for timing (BITS clock) and signaling Loop timing via any telephony port TDM Signaling Protocols ISDN PRI (FAS and NFAS): NI2, Euro ISDN, DMS 250, 5ESS T1/E1 CAS (FGB, FGD and MFR2) ISDN UUI mapping to SIP ® TDM signaling variants supported through the Dialogic Programmable Protocol Language (PPL) SS7 ISUP CICs and Links Termination (connects to SS7 stack on IMG 1010) 3 ® Datasheet Dialogic IMG 1004 Integrated Media Gateway Media Gateway Technical Specifications (continued) IP Signaling Protocols H.323 H.323 v2 H.323 Keep Alive SIP and Related Specifications RFC 2246 Transport Layer Security (TLS) for SIP RFC 2327 Session Description Protocol (SDP) RFC 2976 SIP Info for digit transmission (#,*) and interworking DTMF RFC 3261 SIP Basic RFC 3262 SIP PRACK RFC 3264 SDP Offer/Answer Model RFC 3265 SIP Subscribe/Notify RFC 3311 SIP Update RFC 3325 Asserted Identity RFC 3326 SIP Reason Header RFC 3515 SIP Refer RFC 3581 Symmetric Response Routing RFC 3666 SIP to PSTN Call Flows RFC 3725 Third Party Call Control for SIP RFC 4028 SIP Session Timer RFC 4244 SIP History info (for call diversion) RFC 4904 SIP tgrp (trunk group) parameter SIP 3xx Gateway Responses and 302 Initiate SIP Diversion Header SIP Trunk Group IDs (OTG, DTG) SIP Coder Negotiation SIP Busy Out QoS Adaptive jitter buffer Packet loss compensation Configurable Type of Service (ToS) fields for packet prioritization and routing 4 ® Datasheet Dialogic IMG 1004 Integrated Media Gateway Media Gateway Technical Specifications (continued) Approvals and Compliance For information about RoHS compliance and global approvals, contact your Dialogic sales representative. EMC/EMI USA/Canada: FCC Part 15, ICES-003 European Union: EN55022: 1998/A1:2000/A2:2003, EN55024: 1998/A1:2000/A2:2003, EN300386: 2001 Ver. 1.3.3 Australia/New Zealand: AS/NZS CISPR 22:2004 Japan: VCCI Safety USA/Canada: CSA-C22.2 No. 60950-1-07 European Union: EN60950-1 Australia/New Zealand: AS/NZS 60950.1:2003 CB Scheme International CB Scheme IEC 60950-1 Telecom Approvals USA/Canada: FCC Part 68/IC CS03 European Union: TBR 12, 13 and TBR 4 Australia: AS/ACIF S-016 and S-038 Japan: JATE Green Book Reliability/Warranty Warranty information at http://www.dialogic.com/warranties Estimated MTBF per Telecordia Method 1: AC power: 344,824 hours 5 Large Logo Medium Logo Small Logo www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th floor Montreal, Quebec CANADA H4M 2V9 Dialogic is a registered trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at the address provided above. The names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical Specifications forms part of the specifications of the product and any benefits specified are not guaranteed. No licenses or warranties of any kind are provided under this datasheet. Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice. Copyright © 2008 Dialogic Corporation All rights reserved. 10/08 10911-04
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the IMG 1004 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods