Datasheet DM3 Media Board ® Dialogic DM/V160-LP Media Board ® The Dialogic DM/V160-LP Media Board is a full-size 16-port, universal PCI-based voice processing and analog interface board for high-density analog voice processing solutions. Well-suited for advanced communications applications requiring multimedia resources including web-enabled contact centers, uniŢed messaging, and speech-enabled Interactive Media Response (IMR) systems, this high-performance, scalable board offers a rich set of advanced features and support for Digital Signal Processor (DSP) technology and signal processing algorithms — ensuring a competitive edge for a variety of solutions. With approvals in many countries across the world, the DM/V160-LP lets developers take solutions into the global marketplace. It supports Caller ID in the United States, Japan, and the United Kingdom, and a special version of the board is available for deployment in the European Union. ® ® Support for the Dialogic R4 Application Programming Interface (API) provides easy interoperability with other Dialogic products such as CT Bus and SCbus boards. Applications can be ported to lower or higher density platforms with little effort and new features can be added with only minimal modiŢcation, protecting investment in hardware and application code. Support for Continuous Speech Processing (CSP) technology enables friendly user interface and seamless integration of speech recognition software from the leading speech technology vendors. CSP reduces system latency, increases recognition accuracy, and improves overall system response time for high-density speech solutions. Features Benefits 16 independent loop start telephone interfaces and 16 channels Allows creation of larger high-density analog applications with of voice processing in a single PCI slot fewer boards per chassis while lowering costs Full support for Japanese Caller ID, including the ability to International approvals increase market segment opportunities detect on-hook polarity reversals for accurate and reliable by allowing deployment of solutions worldwide Customer IdentiŢcation (CID) information Caller ID is also supported for the United States and the United Kingdom Programmable AGC parameters Offers developers greater ţexibility for implementing and installing highly accurate, mission-critical voice processing systems Four ports of onboard fax Gives developers more resources without using additional chassis slots or hardware, which saves money Universal 32-bit PCI edge connector Ensures compatibility with 3.3 V and 5.0 V bus signals, enabling simpler deployment in a wide variety of PCI chassis from popular manufacturers ® Datasheet Dialogic DM/V160-LP Media Board Technical Specifications Analog interfaces 16 Maximum Boards per system 8 Number may be limited by application, system performance or memory, and number of calls Control microprocessor ARM7 RISC processor Control microprocessor memory Up to 8 MB local to control processors Digital signal processors Motorola 56311 @ 150 MHz DSP memory 512 K word SDRAM local to each DSP ARM ASIC contains internal 1k x 32 bits 24-bit wide SRAM local to each DSP Baseboard global memory 32-bit wide DRAM accessible to all signal processors and control processor ® Supported operating systems Linux; Windows . Details at http://www.dialogic.com/systemreleases CSP Yes Signaling Analog loop start Host Interface Bus compatibility PCI Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz Bus mode Target and DMA master mode operation Computer telephony bus ECTF H.100 compliant CT Bus, offering — Onboard switching access to 4096 bidirectional 64 kb/s DS0 time slots — SCbus interoperability through provided adapter — 68-pin ribbon cable connector Telephony bus connector H.100-style 68-pin Ţne pitch card edge connector Network connectors Six RJ-25 on rear bracket Host interface memory 512 KB shared with control processor Platform Form factor PCI long card, single-slot width 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements +3.3 VDC Not required +5 VDC 7.5 W +12 VDC 1.2 W –12 VDC 1.2 W Environmental Requirements Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing 2 ® Dialogic DM/V160-LP Media Board Datasheet Technical Specifications (cont.) Trunk Interface Trunk type Analog loop start (EIA/TIA 464B) Loop current range 20 mA to 120 mA Ring detection 40 Vrms to 130 Vrms 15.3 Hz to 68 Hz Ringer Equivalence Number (REN) 0.8B Battery reversal detection Yes Connector Six RJ-25s Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc 60950 File E96804 Europe EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 60950 File E96804 International IEC60950 CISPR 22 CISPR 24 Telecom Approvals United States US: EBZVM08BDMV160LP Canada IC: 885A-DMV160LP Japan A03-0045JPA European Union DoC 06/06/2003 Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method I PCI: 87,000 hours Warranty Warranty information at http://www.dialogic.com/warranties Audio Signal Usable receive range –40 dBm0 to 0 dBm0 nominal, conŢgurable by parameter** Automatic gain control Application can enable/disable Above –21 dBm results in full scale recording, conŢgurable by parameter Silence detection –40 dBm nominal, software adjustable** Transmit level (weighted average) –9.5 dBm nominal, conŢgurable by parameter** Transmit volume control 20 dB adjustment range, with application-deŢnable increments and legal limit cap File data formats Tagged Image File Format-Fax (TIFF-F) for transmit/receive MH, MR, and MMR w/ECM Frequency Response G.711 PCM Encoding 24 kb/s 300 Hz to 2600 Hz ±3 dB 32 kb/s 300 Hz to 3400 Hz ±3 dB 64 kb/s 300 Hz to 3400 Hz ±1 dB 3 ® Datasheet Dialogic DM/V160-LP Media Board Technical Specifications (cont.) Audio Digitizing 8.5 kb/s TrueSpeech 16 kb/s G.726 bit exact @ 8 kHz sampling rate, 2-bit samples 24 kb/s G.726 bit exact @ 8 kHz sampling rate, 3-bit samples 32 kb/s G.726 bit exact @ 8 kHz sampling rate, 4-bit samples 40 kb/s G.726 bit exact @ 8 kHz sampling rate, 5-bit samples ® 13 kb/s GSM full rate 6.10 and RTP (Microsoft format and TIPHON format) 24 kb/s OKI ADPCM @ 6 kHz sampling rate, 4-bit samples 32 kb/s OKI ADPCM @ 8 kHz sampling rate, 4-bit samples 48 kb/s µ-law G.711 PCM @ 6 kHz sampling rate, 8-bit samples 48 kb/s A-law G.711 PCM @ 6 kHz sampling rate, 8-bit samples 64 kb/s µ-law G.711 PCM @ 8 kHz sampling rate, 8-bit samples 64 kb/s A-law G.711 PCM @ 8 kHz sampling rate, 8-bit samples 88 kb/s Linear PCM @ 11 kHz with 8-bit linear samples 176 kb/s Linear PCM @ 11 kHz with 16-bit linear samples Digitization selection Selectable by application on function call-by-call basis Pitch controlled Playback speed control Available for 8 kHz coders Adjustment range: ±50% Adjustable through application or programmable DTMF control DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia* LSSGR Sec. 6 Dynamic range –36 dBm to +3 dBm per tone, conŢgurable by parameter** Minimum tone duration 40 ms; can be increased with software conŢguration Interdigit timing Detects like digits with a >45 ms interdigit delay Detects different digits with a 0 ms interdigit delay Acceptable twist Meets Telcordia LSSGR Sec 6 and EIA 464B requirements Noise tolerance Meets Telcordia LSSGR Sec 6 and EIA 464B requirements for Gaussian, impulse, and power line noise tolerance Cut-through Local echo cancellation permits 100% detection with a >4.5 dB return loss line Talk-off Detects less than 10 digits while monitoring Telcordia TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits) Detects 0 digits while monitoring MITEL speech tape #CM 7291 Global Tone Detection Tone type Programmable for single or dual Maximum number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Maximum frequency deviation Programmable in 5 Hz increments Frequency resolution ±5 Hz. Separation of dual frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB Timing Programmable cadence qualiŢer, in 10 ms increments Dynamic range Default: –38 dBm to –3 dBm, adjustable by parameter Ţle Global Tone Generation Tone type Generate single or dual tones Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude 0 dBm to –40 dBm 4 ® Dialogic DM/V160-LP Media Board Datasheet Technical Specifications (cont.) MF Signaling (T-1) R1 MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Telcordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321 Transmit level Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Signaling mechanism Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Dynamic range for detection –25 dBm0 to –3 dBm0 per tone Acceptable twist 6 dB Acceptable freq. variation Less than ±1 Hz Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Default uses both frequency and cadence detection Application can select frequency only for faster detection in speciŢc environments Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Uses both frequency and cadence detection Positive voice detection accuracy >98% based on tests on a database of real world calls. Performance in other markets may vary Positive voice detection speed Detects voice in as little as 1/10 of a second Positive answering machine detection >85% based on application and environment accuracy Fax/modem detection Preprogrammed Intercept detection Detects entire sequence of the North American tri-tone Other intercept tone sequences can be programmed Dial tone detection before dialing Application enable/disable Supports up to three different user-deŢnable dial tones Programmable dial tone drop out debouncing (when not part of regulatory approval) Tone Dialing DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec. 6, TR-NWT-000506, ITU-T Q.23 Frequency variation Less than ±1 Hz Rate 10 digits/s, conŢgurable by parameter** Level –4.0 dBm per tone, nominal, conŢgurable by parameter** Pulse dialing 10 PPS standard, 63% break-ratio, conŢgurable by country parameter Protocols Analog Loop start Facsimile Number of ports 4 Compatibility Group III SoftFax ETSI NET30 and ITU-T T.30, T.4, and T.6 compliant Compression MH, MR, MMR and ECM support Speed 14.4 kb/s or greater, transmit and receive Fax resource management Not required Ordering Information Product Code Order Code Description DMV160LPW 884-442 16-port Analog, Loop-Start, PCI DMV160LPWEU 884-443 16-port Analog, Loop-Start, PCI, Europe 5 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED ® WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Microsoft and Windows are registered trademarks of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgurations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing ® Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). ** ConŢgurable to meet country speciŢc PTT requirements. Actual speciŢcation may vary from country to country for approved products. Copyright © 2007 Dialogic Corporation All rights reserved. 11/07 8134-03 www.dialogic.com