Datasheet DM3 Media Boards ® Dialogic DM3 Media Boards ® The Dialogic DM3 Media Boards are among the industry's most powerful media platforms for developers seeking to rapidly build and globally deploy some of the highest density media server solutions for the enterprise and public networks. They provide a true universal port solution with a robust media feature set, including voice processing, speech recognition, fax, and conferencing capabilities, combined with an extensive suite of network protocols in a single PC slot. Products Discussed in This Datasheet ® ® • Dialogic DM/V600BTEP Media Board • Dialogic DM/V600BTEC Media Board ® ® • Dialogic DM/V1200BTEP Media Board • Dialogic DM/V1200BTEC Media Board These combined media boards feature software selectable T1/E1 digital network interfaces; universal media loads offering simultaneous fax, conferencing, and voice; improved media densities; the ability to mix select protocols; and a variety of conferencing media loads. Applications can be ported easily to lower or higher density platforms and new features can be added with only minimum modiŢcations — thus protecting investment in hardware and application code. Features Benefits Provides software selectable trunks to conŢgure the board to Reduces the total cost of ownership by increasing ţexibility, be either T1 or E1 reducing inventory, and simplifying the purchasing process and test effort Features universal media loads for mixed media resources Combines three boards into one including voice, fax, and conferencing Reduces the development, inventory, and solution costs by eliminating the need for dedicated media boards Provides the ability to mix select protocols on each span Maximizes slot efŢciency and reduces total cost of ownership in environments where there are multiple protocols (for example, call centers) Built on the industry-standard telephony bus — ECTF Allows applications expand (up to 1200 ports per system) H.100/H.110 CT Bus through access to other communications boards, such as IP telephony, ATM, HDSI, and SS7 Supports TrueSpeech voice coder (a default coder with Lets developers play Internet content and develop uniŢed ® ® Windows supported by Windows Media Player) messaging systems without creating and supporting custom clients Ability to select between 16 ms, 32 ms, and 64 ms echo The longer tail lengths are useful for environments and cancellation tail on select media loads applications when optimum audio quality and clarity is a necessity Separate models available with Universal PCI or Universal PCI form factor compatible with 3.3 V and 5.0 V bus CompactPCI form factor signals enables deployment in a wide variety of PCI chassis from popular manufacturers; CompactPCI also available ® Datasheet Dialogic DM3 Media Boards Technical Specifications Digital interfaces Two or four T1/E1 Maximum boards/system Application, call trafŢc, and CPU dependent ® Control processor Intel i960HD Control processor memory 32 MB Baseboard global memory 32-bit wide DRAM accessible to all signal processors and control processor Cache prompts 4 MB to 8 MB Voice resources Up to 120, depending on board and selected media load Fax resources Up to 60, depending on board and selected media load Conferencing resources Up to 180, depending on board and selected media load Resource bus CT Bus ® Supported operating systems Windows ; Linux. Details at http://www.dialogic.com/systemreleases CSP Yes Signaling Digital ISDN PRI CAS; R2MF; CCS; NFAS Host Interface Host interface memory 512 KB Bus mode Target and DMA master mode operation Support 3.3 V or 5 V signaling environment (universal connectivity) Network connectors Two or four RJ-48C on front bracket Platforms Form factor PCI: Universal PCI long card, single-slot width CompactPCI: 6U Eurocard form factor, single-slot width Digital signal processors PCI: Motorola 56321 10 DSPs @ 220 MHz each CompactPCI: Motorola 56321 10 to 18 DSPs @ 220 MHz each DSP memory 512 k word SRAM local to each DSP Bus compatibility Rev 2.2 of PCI Bus SpeciŢcation Bus mode Target and DMA master mode operation Computer telephony bus PCI: ECTF H.100 compliant CT Bus, offering onboard switching access to 4096 bi-directional 64 kb/s DS0 time slots 68-pin ribbon cable connector CompactPCI: ECTF H.100 compliant CT Bus, offering onboard switching access to 4096 bi-directional 64 kb/s DS0 time slots Network connectors PCI: Two or four RJ-48C on front bracket CompactPCI: Provided through rear I/O transition modules (not included with board) BNC for 75 Ohm lines RJ-48C for 100 Ohm and 120 Ohm lines Telephone Interface DSX-1 T1 Clock rate 1.544 Mb/s ±32 ppm Level 3.0 V (nominal) Pulse width 323.85 ns (nominal) Line impedance 100 Ohm ±10% Other electrical characteristics Complies with AT&T TR62411 and ANSI T1.403-1989 Framing SF (D3/D4) ESF for ISDN Line coding AMI AMI with B7 stufŢng B8ZS 2 ® Dialogic DM3 Media Boards Datasheet Technical Specifications (cont.) Telephone Interface DSX-1 T1 (cont.) Clock and data recovery Complies with AT&T TR62411 and Telcordia TA-TSY-000170 Jitter tolerance Complies with AT&T TR62411 and ANSI T1.403-1989 Connectors RJ-48C Telephony bus connector H.100 (PCI) and H.110 (CompactPCI) style connectors Loopback Supports switch-selectable local analog loopback and software selectable local digital loopback Zero code suppression Bell ZCS (Jam bit 7) GTE ZCS (Jam bit 8) Digital Data Service ZCS No zero code suppression Telephone Interface CEPT E1 Network clock rate 2.048 Mb/s ±50 ppm Internal clock rate 2.048 Mb/s ±32 ppm Level 2.37 V (nominal) for 75 Ohm lines 3.0 V (nominal) for 120 Ohm lines Pulse width 244 ns (nominal) Line impedance 75 Ohm, unbalanced 120 Ohm, balanced Other electrical characteristics Complies with ITU-T Rec. G.703 Framing ITU-T G.704-1988 with CRC4 Line coding HDB3 Clock and data recovery Complies with ITU-T Rec. G.823-1988 Jitter tolerance Complies with ITU-T Rec. G.823, G.737, G.739, G.742-1988 Connectors BNC for 75 Ohm lines RJ-48C for 120 Ohm lines Telephony bus connector H.100 (PCI) and H.110 (CompactPCI) style connectors Loopback Supports switch-selectable local analog loopback and software selectable local digital loopback Power Requirements ConŢguration +5 VDC +12 VDC –12 VDC +3.3 VDC PCI DM/V600BTEP 4.0 A N/A N/A N/A DM/V1200BTEP 4.0 A N/A N/A N/A Compact PCI DM/V600BTEC 0.4 A N/A N/A 5.2 A DM/V1200BTEC 0.3 A N/A N/A 5.8 A Cooling Requirements Operating temperature +32°F (0°C) to +122°F (+50°C) Cooling condition for maximum operating temperatures +122°F (+50°C) 2.3 CFM per board +104°F (+40°C) 1.5 CFM per board +86°F (+30°C) 1.1 CFM per board Storage temperature –4°F (–20°C) to +158°F (+70°C) Humidity 8% to 80% noncondensing 3 ® Datasheet Dialogic DM3 Media Boards Technical Specifications (cont.) Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC United States UL 60950 File E96804 FCC Part 15 Class A Canada ULc CSA 60950 File E96804 ICES-003 Class A Europe EN60950 EN55022 EN55024 International IEC60950 CISPR 22 CISPR 24 Telecom Approvals United States US:EBZUSA-31207-XD-T Canada IC:885A 7969 A Europe DoC TBR4 Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method I PCI: DM/V600BTEP: 105,000 hours DM/V1200BTEP: 98,000 hours CompactPCI: DM/V600BTEC: 92,000 hours DM/V1200BTEC: 87,000 hours Warranty Warranty information at http://www.dialogic.com/warranties Audio Signal Usable receive range –40 dBm0 to 0 dBm0 nominal, conŢgurable by parameter** Automatic gain control Application can enable/disable output level, conŢgurable by parameter** Silence detection –40 dBm nominal, software adjustable** Transmit level (weighted average) –12.5 dBm nominal, conŢgurable by parameter** Transmit volume control 40 dB adjustment range, with application-deŢnable increments and legal limit cap Frequency Response 24 kb/s 300 Hz to 2600 Hz ±3 dB 32 kb/s 300 Hz to 3400 Hz ±3 dB 64 kb/s 300 Hz to 3400 Hz ±3 dB Audio Digitizing 8.5 kb/s TrueSpeech 13 kb/s GSM (TIPHON, MSGSM) 16 kb/s, 24 kb/s, 32 kb/s, and 40 kb/s G.726 24 kb/s OKI ADPCM @ 6 kHz sampling 32 kb/s OKI ADPCM @ 8 kHz sampling 32 kb/s IMA ADPCM @ 8 kHz sampling 48 kb/s G.711 PCM (µ-law for T1and A-law for E-1) @ 6 kHz sampling rate 64 kb/s G.711 PCM (µ-law for T1and A-law for E-1) @ 8 kHz sampling rate 64 kb/s Linear 8 kHz 8-bit WAV 128 kb/s Linear 8 kHz 16-bit WAV 88 kb/s Linear 11 kHz 8-bit WAV 4 ® Dialogic DM3 Media Boards Datasheet Technical Specifications (cont.) Audio Digitizing (cont.) 176 kb/s Linear 11 kHz 16-bit WAV ® A-law/µ-law conversion Standard (with Dialogic System Release 6.1 for Linux) Digitization selection Selectable by application on function call-by-call basis Playback speed control Pitch controlled Available on the following 8 kHz coders: OKI ADPCM, G.711 PCM, Linear Adjustment range: ±50% Adjustable through application or programmable DTMF control DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec. 6 Dynamic range (T1) –36 dBm to +3 dBm per tone, conŢgurable by parameter** (E1) –39 dBm to 0 dBm per tone, conŢgurable by parameter** Minimum tone duration 32 ms, can be increased with software conŢguration Interdigit timing Detects like digits with a >45 ms interdigit delay Detects different digits with a 0 ms interdigit delay Acceptable twist and frequency variation (T1) Meets Telcordia LSSGR Sec 6 and EIA 464 requirements (E1) Meets ITU-T Q.23 recommendations** Noise tolerance Meets Telcordia LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power line noise tolerance Cut-through (T1) Local echo cancellation permits 100% detection with a >4.5 dB return loss line (E1) Digital trunks use separate transmit and receive paths to network Performance dependent on far-end handset’s match to local analog loop Talk-off Detects less than 10 digits while monitoring Telcordia TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits) Detects 0 digits while monitoring MITEL speech tape #CM 7291 Global Tone Detection Tone type Programmable for single or dual Maximum number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Maximum frequency deviation Programmable in 5 Hz increments Frequency resolution ±5 Hz. Separation of dual frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB Timing Programmable cadence qualiŢer, in 10 ms increments Dynamic range (T1) Default set at –36 dBm to +3 dBm per tone, programmable (E1) Default set at –39 dBm to +0 dBm per tone, programmable Global Tone Generation Tone type Generate single or dual tones Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude (T-1) –43 dBm0 to –3 dBm0 per tone nominal, programmable (E-1) –40 dBm0 to +0 dBm0 per tone nominal, programmable MF Signaling (T1) R1 MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Telcordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321 Transmit level Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Signaling mechanism Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Dynamic range for detection –25 dBm to +3 dBm per tone Acceptable twist 6 dB Acceptable frequency variation Less than ±1 Hz 5 ® Datasheet Dialogic DM3 Media Boards Technical Specifications (cont.) MF Signaling (E1) R2 MF digits All 15 forward and backward signal tones per ITU-T Q.441 Transmit level –8 dBm0 per tone, nominal, per ITU-T Q.454; programmable Signaling mechanism Supports the R2 compelled signaling cycle and non-compelled pulse requirements per ITU-T Q.457 and Q.442 Dynamic range for detection –35 dBm to –5 dBm per tone Acceptable twist 7 dB Acceptable freq. variation Less than ±1 Hz Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Default uses both frequency and cadence detection Application can select frequency only for faster detection in speciŢc environments Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Uses both frequency and cadence detection Positive voice detection Standard Positive voice detection speed Detects voice in as little as 1/10th of a second Positive answering machine detection Standard Fax/modem detection Preprogrammed Intercept detection Detects entire sequence of the North American tri-tone Other intercept tone sequences can be programmed Dial tone detection before dialing Application enable/disable Supports up to three different user-deŢnable dial tones Programmable dial tone drop out debouncing (when not part of regulatory approval) Tone Dialing DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6, TR-NWT-000506, ITU-T Q.23 Frequency variation Less than ±1 Hz Rate 10 digits/s, conŢgurable by parameter** Level (T1) –4.0 dBm per tone, nominal, conŢgurable by parameter** (E1) –7.0 dBm per tone, nominal, country-speciŢc** Conferencing Max. parties per conference Up to 90 (without bridging) on select media loads Bridging/cascade conferencing Lets you bridge together conferences from different DSPs and boards, consuming just two conferencing resources per bridge Echo cancellation 16 ms Tone clamping Enable/disable at board level Summing modes Automatically conŢgures to active talker or pure summation based on number of parties in a conference Application can specify minimum number of parties before active talker mode is used Automatic gain control Normalizes the parties' power levels to a uniŢed target Key features include speech/noise discrimination, tolerance to impulsive noise, faster convergence, and increased steady-state stability Tone detection/generation Generates tariff tones and warning tones Detects DTMF from each party and can clamp those tones so that other members of the conference do not hear them Active talker notiŢcation Can notify the application of which party is talking so the application can process that information and act accordingly Number of active talkers Dynamically selectable Modes Duplex Monitor Coach Pupil 6 ® Dialogic DM3 Media Boards Datasheet Technical Specifications (cont.) Facsimile Fax compatibility T.30, T.4, T.6, V.17, V29, V27ter, V.21 Speed 14.4 kb/s with automatic fallback send and receive concurrently on all channels TIFF Single page Multipage Compression MH (ITU T.4, 1D) MR (ITU T.4 2D) MMR (ITU T.6) Onboard, on-the-ţy ECM Supported ASCII to TIFF Onboard, on-the-ţy Page headers Generated on board, on-the-ţy Width A4 Polling Normal and turnaround Resolution Standard (100 dpi x 200 dpi) Fine (200 dpi x 200 dpi) SuperŢne (200 dpi x 400 dpi) JPEG/JBIG Color fax and gray scale fax pass-through feature Protocols T1CAS E&M (wink start, immediate start), loop start, ground start; feature group A, B, and D T1 ISDN NI-2, 4ESS, 5ESS, DMS100, DMS250, INS1500, Q.Sig E1 CAS Many country-speciŢc MFC-R2 variants ® For more details, refer to the latest Dialogic Global Call Protocols Package release notes E1 ISDN NET5, DPNSS, DASS2, Q.Sig 7 ® Datasheet Dialogic DM3 Media Boards Additional Components • Multidrop CT Bus cables (CBLCTB3DROPQ, CBLCTB4DROPQ, CBLCTB8DROPQ, CBLCTB12DROPQ, CBLCTB16DROPQ) • Rear I/O module for CompactPCI boards — Unkeyed (works in keyed and unkeyed chassis): RIODMVB4TECW, RIODMVB4TEC75W — Keyed (works only in keyed/guided chassis): RIODMVB4TECKW, RIODMVB4TEC75KW • 120 Ohm to 75 Ohm converter for PCI boards (supplied by a third party) Ordering Information Product Code Order Code Description DMV1200BTEPW 881-806 120 port Digital T1/E1, PCI DMV1200BTEPWCN 881-936 120 port Digital T1/E1, PCI, China DMV1200BTEPWIN 881-829 120 port Digital T1/E1, PCI, India DMV1200BTEPWJP 881-711 120 port Digital T1/E1, PCI, Japan DMV1200BTEPWNLK 881-781 120 port Digital T1/E1, PCI, non-loopback mode DMV600BTEPW 881-810 60 port Digital T1/E1, PCI DMV600BTEPWCN 881-774 60 port Digital T1/E1, PCI, China DMV600BTEPWIN 881-872 60 port Digital T1/E1, PCI, India DMV600BTEPWJP 881-721 60 port Digital T1/E1, PCI, Japan DMV600BTEPWNLK 881-789 60 port Digital T1/E1, PCI, non-loopback mode DMV1200BTECW 881-804 120 port Digital T1/E1, cPCI DMV1200BTECWCN 881-916 120 port Digital T1/E1, cPCI, China DMV1200BTECWJP 881-709 120 port Digital T1/E1, cPCI, Japan DMV600BTECW 881-809 60 port Digital T1/E1, cPCI DMV600BTECWCN 881-763 60 port Digital T1/E1, cPCI, China DMV600BTECWIN 881-871 60 port Digital T1/E1, cPCI, India DMV600BTECWJP 881-720 60 port Digital T1/E1, cPCI, Japan CBLCTB12DROPQ 883-019 12 drop CT Bus cable CBLCTB16DROPQ 883-020 16 drop CT Bus cable CBLCTB3DROPQ 883-027 3 drop CT Bus cable CBLCTB4DROPQ 883-021 4 drop CT Bus cable CBLCTB8DROPQ 883-022 8 drop CT Bus cable RIODMVB4TECW 882-710 Rear I/O DMVB T1/E1-120 RIODMVB4TEC75W 882-715 Rear I/O DMVB T1/E1-75 RIODMVB4TECKW 882-716 Rear I/O DMVB T1/E1-120 keyed RIODMVB4TEC75KW 882-717 Rear I/O DMVB T1/E1-75 keyed 8 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC® PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgurations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). **ConŢgurable to meet country-speciŢc PTT requirements. Actual speciŢcation may vary from country to country for approved products. Copyright © 2007 Dialogic Corporation All rights reserved. 12/07 8848-04 www.dialogic.com