Datasheet Converged Services Platforms ® Dialogic Converged Services Platforms (CSP) ® Dialogic Converged Services Platforms (CSP) are high-performance, carrier-grade, and open programmable media platforms with integrated signaling capabilities for delivering enhanced telecommunications services. The CSP Platforms bridge existing wired and wireless networks with next-generation IP networks and integrate signaling protocols for IP (SIP and H.323), TDM (SS7, PRI, and R1/R2), mobility, and IN. Their versatility allows the CSP Platforms to speed up time-to-market, reduce costs, increase revenue, and protect a carrier’s investment in legacy equipment. Products Discussed in This Datasheet ® ® • Dialogic CSP 2090 Converged Services Platform • Dialogic CSP 2040 Converged Services Platform Features Benefits Powerful and robust media processing capabilities Allows the development of new innovative and legacy voice- based applications Integrates multiple protocols in a single system Can accelerate time-to-market by shortening development time for communications applications Supports circuit- and packet-switched protocols and Allows the migration of services from legacy networks to next- interfaces in a single platform generation networks and IP-based architectures, and protects carrier investment in legacy equipment Supports a single platform for signaling and for media Reduces the cost and complexity of implementing new services Provides high-reliability features such as “no single point of Enables the secure and robust operating environment required failure,” hot swappable boards, fault monitoring, fault isolation, in carrier-class installations that must meet rigorous 99.999% and automatic switchover; includes NEBS Level 3 compliance (“Ţve nines”) reliability standards Allows a high degree of scalability by scaling from 96 to Enables network operators to deploy services cost-effectively, 14,000 IP and/or TDM ports even at introduction, and to scale up as trafŢc grows Distributed signaling architecture that separates physical Enables ţexible conŢguration and seamless integration of IP and network interfaces from logical signaling operations, allowing TDM signaling protocols the distribution of telephony services across service resources ® Includes Dialogic Programmable Protocol Language (PPL), Allows developers to create and/or customize signaling variants a development tool that allows modiŢcation of a signaling rapidly in the ofŢce or in the Ţeld, which can signiŢcantly protocol’s state machine improve deployment time and expedite network compliance ® Datasheet Dialogic Converged Services Platforms (CSP) The CSP Platforms deliver high levels of media processing and call control in circuit-switched, packet-switched, or converged networks. The CSP 2090 is a multi-board chassis with twenty slots that can support up to 2,048 physical voice channels over TDM or IP interfaces or combinations of TDM and IP ports. It can scale up to 14,000 channels with seven nodes that provide the capabilities of a large logical switch. The CSP 2040 is a multi-board chassis with seven slots. It uses the same boards as the CSP 2090 and the same system software. It supports up to 1,024 physical voice channels for TDM, IP, or TDM/IP combined solutions. Using the CSP Platforms, developers can create applications with both IP and TDM call control protocols, media processing, and IN signaling that enable feature-rich, network-based converged service implementations. Because of the high degree of ţexibility built into their design, the CSP Platforms deliver an open, programmable architecture that can meet the demands of a wide variety of carrier-class communications services from uniŢed messaging to web-based services over many different types of networks. Optional products that can be used to enhance the CSP Platforms include: ® • Dialogic IP Network Interface Series Cards — Offer connectivity to IP networks and a comprehensive set of features for transcoding PCM-coded voice trafŢc to IP-based coders. ® • Dialogic Digital Signal Processing Series Cards — Supply rich, integrated media processing. ® • Dialogic Line Cards — Provide connectivity to legacy networks over E1, T1, J1, and DS3 interfaces. ® • Dialogic Signaling Cards — Support multiple signaling protocols for legacy and IP networks. ® • Dialogic Call Agent Mode Software — Allows the bearer (voice) path for SIP-based calls to bypass the CSP Platforms physically so that service providers can reduce both their equipment and operating costs. ® ® • Dialogic SwitchKit Software — Provides a development environment, which can speed up application creation, and a set of integrated software tools for operations, administration, maintenance, and provisioning. 2 ® Dialogic Converged Services Platforms (CSP) Datasheet Technical Specifications System Features Multi-function platform: PSTN/IP service node, media server, media gateway Standards-based, NEBS compliant, carrier-grade architecture Scalable from 96 to thousands of non-blocking ports T1/E1/J1/DS3/RTP network interfaces Multi-protocol (TDM and IP) Dual 10/100 Ethernet LAN interfaces per VoIP card (IP Media) System Redundancy Features All components hot-swappable No single point of failure 1+1 CPU active standby N+1 (T1, E1, J1, DS3) card redundancy 1+1 SS7 and ISDN active standby 1+1 power supply, load sharing, dual power feeds DSP load sharing IP Media load sharing OAM&P Features ® ® ® Windows NT , Windows XP, Windows Server 2003 GUI (LLC also supported in Linux, HP/UX, and Solaris) Real-time alarm monitoring via SNMP Local and remote management Resource utilization reporting IP Signaling Protocols SIP: RFC2543 and RFC3261 (partial) H.323 v2: H.323 devices and endpoints, (H225.0, Q.931, H225.0 RAS, H.245) TDM Signaling Protocols SS7 MTP: ISUP ANSI (T1.113) and ITU-T (White Book 1993), ISUP-ETSI with country variants, TUP, SCCP, TCAP IN and wireless protocol stacks: MAP, ANSI-41, CAMEL, WIN, INAP ISDN PRI Q.931, Euro ISDN, National ISDN, other international variants programmable by GUI R1/R2 with international variants IP Network Interface Coders Selectable coders; G.711, G.723.1, G.726, G.729 Group 3 Fax Relay via ITU T.38 DTMF digit relay via RFC2833 RTP redundancy via RFC2198 Adaptive jitter buffer Echo cancellation (G.168 compliant) Silence suppression Comfort noise generation Media Processing Dynamic recording and playback Conferencing (includes conference-in-conference) Tone generators and receivers Fax T.30 Echo cancellation Positive voice detection and answering machine detection Support of NFS server for network Ţle storage 3 ® Datasheet Dialogic Converged Services Platforms (CSP) Technical Specifications (cont.) Physical Specifications CSP 2040 Height: 17.8 cm (7.0 in.) Width: 43.5 cm (17.125 in.) Depth: 48.2 cm (19.0 in.) Weight: 18 kg (40 lb) (loaded chassis) Power Requirements CSP 2040 Maximum power capacity: 250 W Power ratings: -48 VDC @ 10 amps rated Environmental Requirements CSP 2040 Environmental: 0°C to 50°C, 32°F to 122°F operational Physical Specifications CSP 2090 Height: 39.9 cm (15.7 in.) Width: 43.8 cm (17.25 in.) Depth: 48.6 cm (19.125 in.) Weight: 30 kg (65 lb) unloaded; 45 kg (100 lb) loaded Power Requirements CSP 2090 Maximum power capacity: 450 W Power ratings: -48 VDC @ 25 amps rated Environmental Requirements CSP 2090 Environmental: 0°C to 50°C, 32°F to 122°F operational Approvals and Compliance For information about RoHS compliance and global approvals, contact your Dialogic sales representative. EMC/EMI United States/Canada: FCC Part 15, ICES-003 European Union: EN55022: 1998/AI:2000/A2:2003, EN55024: 1998/AI:2000/A2:2003, EN300386: 2001 Ver. 1.3.3 Australia/New Zealand: AS/NZS CISPR 22:2002 Japan: VCCI CB Scheme International CB Scheme IEC 60950-1 Telecom Approvals United States: FCC Part 15; CSA 60950-1 Canada: ICES 003; CAN/CSA-CSS.2, No. 60950-1-03 Australia/New Zealand: AS/ACIF S-016 and S-038 NEBS: NEBS Level 3 Approval (GR 1089 and GR 63) European Union: CE Mark Reliability/Warranty MTBF information available upon request. Warranty information at http://www.dialogic.com/warranties 4 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 Dialogic and Switchkit are registered trademarks of Dialogic Corporation or its subsidiaries (“Dialogic”). Windows, Windows NT and Windows Server are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. No licenses or warranties of any kind are provided under this datasheet. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Copyright © 2007 Dialogic Corporation All rights reserved. 12/07 10825-01 www.dialogic.com