® STATSHIELD EMI/RFI MOISTURE BARRIER BAG SHIELDING SERIES Specifications: Electrical Properties Typical Values Test Procedures/Method Surface Resistivity (both surfaces @ 12%RH, Ω/sq) <10E11 ANSI/ESD S11.11 Made in America Resistivity, conductive metal layer (Ω/sq) <10E2 ASTM D257 EMI Shielding (dB between 1 and 10 GHz) <40 ANSI/ESD S11.31 Capacitive Probe Test (high voltage discharge, V) <20 EIA Std 541/Appendix E, 1kV Discharge Charge Generation 2) Teflon (nC/in -0.09 Modified incline plane 2) Quartz (nC/in +.10 Modified incline plane Physical Properties Thickness (mils) 3.5 (92 microns) ASTM D2103 Tensile Strength (MD, psi) 9,000 ASTM D882-91 Method A Tensile Strength (TD, psi) 10,500 ASTM D882-91 Method A Tear Strength (MD, lb) 4.7 ASTM D1004-94, notched Tear Strength (TD, lb) 4.3 ASTM D1004-94, notched Elongation (MD, %) 98 ASTM D882-91 Method A Elongation (TD, %) 80 ASTM D882-91 Method A Burst Strength (psi) >84 FTMS 101-C, Method 2007-1a Side Weld Seal 3/8 in. Puncture Strength (lb) >20 FTMS 101-C, Method 2065.1 Heat Seal Strength (Vetrod bar sealer, lb/in width) >11 ASTM D1876-93 NOTE: The complete dry package concept of packaging for Heat Seal Temperature (°F) 325 (60 PSI @ 3 sec dwell) electronics requires three elements: Light Transmission (%) <0.01 ASTM D1033-92 Moisture Barrier Bag - To Protect 2 WVTR (gms / 100 in / 24 hrs, 100°F) ≤0.02 ASTM F1249-90 DESICCANT - To Absorb Moisture O TR <0.002 ASTM D3985 @ 100% Oxygen, 2 INDICATOR - To Monitor Performance 2 100 in /24 hr, 77"F, 0%: 90% R.H. For detailed instructions ask for Technical Bulletin TB-2031 Outgassing Pass ASTM E595 "Application Instructions for Moisture Barrier Bags." Contact Corrosion No evidence of corrosion, FTMS 101C, Method 3005 pitting, or etching of material DESICCANT PACK INFORMATION Non-corrosive Pass MIL-STD-3010, M3005 Desiccant packs meet MIL-D-3464. Packs meet Type I and Type II criteria for dust-free packaging. RULE-OF-THUMB - use 1/2 unit for every 45 square inches of bag area. Chemical Properties Static Dissipative 13850 1/2 unit Pail of 550 Polycarbonate compatible: Contains no Amines, Polyester 13852 1 unit Pail of 300 Amides, or N-Octanoic Acid. Aluminum HUMIDITY MONITOR INFORMATION Shielding 13870 Humidity Monitor. Can of 100 2" x 3" blotting paper cards Layer that indicate 10, 20, 30 and 40% relative humidity with a color Shelf life of bags is minimum one year in normal indoor storage ® comparison bar. Meets MIL-I-8835. conditions. Because we package all of our Statshield bags in an oversized Polyester Layer shielding bag rather than a cardboard box, our bags are not exposed to Aluminum Shielding Layer moisture that will degrade the metallized shielding layer. Our bags have an Film complies with the electrical and physical requirements of High Performance Static additional layer of barrier protection because of our packaging. EIA-541, EIA-583, EIA-625, and Mil-PRF-81705D Type I Dissipative Polyethylene This material is used in commercial applications only See reverse side ® ® ® Statshield , Statfree , and Faraday are Registered ® STATSHIELD EMI/RFI, SHIELDING, MOISTURE BARRIER BAG, 3.5 mil Trademarks of Desco Industries Inc. for available sizes. DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DRAWING NUMBER DATE: DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 13806 6/07 PHONE (781) 821-8370 FAX (781) 575-0172 © 2007 DESCO INDUSTRIES INC. Employee Owned “The Organization shall define ESD protective packaging for all EMI/RFI STATIC SHIELDING BAG SIZES ESD susceptible item material movement within Protected Item # Size (WxL) Item # Size (WxL) Item # Size (WxL) Areas, between job sites and field service operations.” See ANSI/ESD S20.20 section 6.2.4.1. 13805 4" x 24" 13820 10" x 24" 13829 16" x 18" Packaging Requirements. “ESD susceptible items shall be 13808 6" x 10" 13822 10" x 30" 13830 18" x 18" packaged in ESD protective packaging while not in a 13810 6" x 24" 13824 12" x 16" 13832 18" x 24" Protected Area.” See ANSI/ESD S20.20 section 6.2.3.1. 13811 6" x 30" 13826 12" x 18" 13816 10" x 12" 13828 15" x 18" Packaged 100 per package "...it is important to take possible temperature exposure into account when shipping electronic parts. It is particularly important to consider what happens to the interior of a package if the environment has high humidity. If the temperature varies across the dew point of the established interior environment of the package, condensation may occur. The interior of a package should either contain desiccant or the air should be evacuated from the package during the sealing process. The package itself should have a low WVTR." (ESD Handbook TR20.20 section 5.4.3.2.2) ® Statshield bags are packaged 100 Desco ESD Bags Are Generally Reusable per package in an oversized For best results, bag inventory should be continually From ANSI/ESD S20.20 section 6.2.4.2. Packaging Guidance: shielding bag rather than a replenished. It is recommended that standard packs of bags "The objective of ESD protective packaging is to prevent a direct cardboard box. Therefore, our bags should be stored in its original packaging in a climate controlled electrostatic discharge to the ESDS item contained within and are not exposed to water vapors environment where the temperature ranges from 45 degrees F to allow for dissipation of charge from the exterior surface. In that will degrade the metallized 70 degrees F and relative humidity is 50%. Bags should not be addition, the packaging should minimize charging of the ESDS stored in ultraviolet sunlight, moisture, or heat because the item in response to an external electrostatic field and triboelectri- shielding layer. Our bags have an aluminum shielding layer could oxidize if exposed to these fication. They may also lose static shielding properties by additional layer of barrier protection conditions. crumpling, puncturing and folding." because of our packaging. We have no reports of degradation of ESD control properties Some end users reuse a Statshield® Transparent Metal In of bags sealed in original standard pack packaging. Desco's ESD Shielding Bag up to six times and then discard. RoHS Compliance Statement Limited Warranty expressly warrants that for a period of one (1) Ideally, the user should test, auditing some percentage of the None of the following materials are year from the date of purchase, Desco products will be free of re-used ESD Bags using test procedures outlined in ANSI/ESD- intentionally added in manufacturing defects in material (parts) and workmanship (labor). S11.11 Surface Resistivity Standard, ANSI/ESD-S11.12 Volume this product: lead, mercury, cadmium, Before using and after one year from purchase date, users Resistance Measurements of Static Dissipative Planar Materials, hexavalent chromium, polybrominated shall determine the suitability of the Statshield ESD Bags for their and Shielding Materials ANIS/ESD S11.31. biphenyls (PBB) or polybrominated intended use. Users assume all risk and liability whatsoever in Desco's only obligation shall be to replace such quantity of the diphenyl ethers (PBDE) as outlined in connection therewith. Mishandling or improper storage may product proved to be defective. See full Limited Warranty the Directive 2002/95/EC Article 4.1. render an ESD Bag unusable to perform its function. ESD Bags information at www.desco.com/Warranty.aspx. See Desco Industries Inc. letter on- that are ripped, torn, or scratched should be discarded. line at Desco.com.