® STATSHIELD M/I SERIES Specifications: Low Charging Electrical Properties Typical Values Test Procedures/Method Polyethylene Surface Resistance: Zipper Outer Surface <10E11 ohms ANSI/ESD S11.11 Aluminum Layer <10E2 ohms ANSI/ESD S11.11 Inner Surface <10E11 ohms ANSI/ESD S11.11 Static Shielding <25 nJ ANSI/ESD S11.31 Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane Quartz: 0.01 nC/sq. in. Modified Incline Plane Capacitance Probe (to dissipate 1 KV) <30V MIL-PRF-81705D, EIA 541 Physical Properties Bag Thickness: Polyester Layer 0.5 Mils Static Dissipative PET film ASTM D-2103 Aluminum Layer 10-25 Angstroms Polyethylene Layer 2.5 Mils Static Dissipative PE film ASTM D-2103 Total Thickness 2.8 to 3.0 Mils ASTM D-2103 Light Transmission (%) >40% (Tobias) ASTM D-1003 Burst Strength (psi) >50 FTMS 101K, Method 2065.1 Heat Seal (lbs/in) >10 375°F, 1/2 sec 60 psi Seam Strength Pass MIL-PRF-81705D Tear Strength (lbs) >25 ASTM D-1004 Puncture Resistance (lbs) >10 ASTM D-2065 2 MVTR (gms / 100 in / 24 hrs, 100°F) <0.40 FTMS 101C/2065 2 OTR (cc / 100 in / 24 hrs) <6.1 ASTM D-1434 Abrasion Resistance >100 cycles Sutherland Abr. (.0000 Steel Wool) Outgassing Pass ASTM E595 Non-corrosive Pass MIL-STD-3010, M3005 Chemical Properties Corrosion No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel Polycarbonate Capability, Yes No Amines or N-Octanoic Acid Not present Side Weld Seals 3/8 in. Static Dissipative Outer Polyester Layer Mixed Unsortable Plastic Scrap Aluminum Shielding Layer Mixed unsortable plastic scrap shall contain assorted plastics of 7 Static Dissipative Inner multiple grades that are co-extruded, bonded or laminated See reverse side for available sizes. Polyethylene Layer together which are unsortable into individual grades. Desco’s bags are recyclable ANSI/ESD S541 Section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA The bag’s material meets the performance specification requirements of Mil-PRF-81705D, Type III. shall require packaging that provides: Bag is free of amines, N-octanoic acid, and heavy metals. 1. Low charge generation ® ® ® Statshield , Statfree , and Faraday are Registered Trademarks of Desco Industries Inc. 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.” ® Made in America STATSHIELD BAG, SHIELDING, METAL IN CONSTRUCTION, ZIPPER DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DRAWING NUMBER DATE: DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 13605 12/06 PHONE (781) 821-8370 FAX (781) 575-0172 © 2006 DESCO INDUSTRIES INC. Employee Owned “The Organization shall define METAL IN BAG SIZES, WITH ZIPPER ESD protective packaging for all ESD susceptible item material movement within Protected Item # Size (WxL) Item # Size (WxL) Item # Size (WxL) Areas, between job sites and field service operations.” See ANSI/ESD S20.20 section 6.2.4.1. 13605 3" x 5" 13655 8" x 8" 13705 12" x 18" Packaging Requirements. 13615 4" x 6" 13660 8" x 10" 13710 14" x 18" “ESD susceptible items shall be packaged in ESD protective packaging while not in a 13630 5" x 8" 13665 8" x 12" 13715 15" x 18" Protected Area.” See ANSI/ESD S20.20 section 6.2.3.1. 13640 6" x 8" 13670 10" x 12" 13720 18" x 18" 13645 6" x 10" 13675 10" x 14" 13725 18" x 24" 13651 7" x 15" 13700 12" x 16" ® Statshield bags are packaged 100 Packaged 100 per package per package in an oversized shielding bag rather than a cardboard box. Therefore, our bags are not exposed to water vapors Desco ESD Bags Are Generally Reusable that will degrade the metallized shielding layer. Our bags have an For best results, bag inventory should be continually From ANSI/ESD S20.20 section 6.2.4.2. Packaging Guidance: replenished. It is recommended that standard packs of bags "The objective of ESD protective packaging is to prevent a direct additional layer of barrier protection should be stored in its original packaging in a climate controlled electrostatic discharge to the ESDS item contained within and because of our packaging. environment where the temperature ranges from 45 degrees F to allow for dissipation of charge from the exterior surface. In 70 degrees F and relative humidity is 50%. Bags should not be addition, the packaging should minimize charging of the ESDS stored in ultraviolet sunlight, moisture, or heat because the item in response to an external electrostatic field and triboelectri- aluminum shielding layer could oxidize if exposed to these fication. They may also lose static shielding properties by conditions. crumpling, puncturing and folding." We have no reports of degradation of ESD control properties Some end users reuse a Statshield® Transparent Metal In of bags sealed in original standard pack packaging. Desco's ESD Shielding Bag up to six times and then discard. Limited Warranty expressly warrants that for a period of one (1) Ideally, the user should test, auditing some percentage of the RoHS Compliance Statement None of the following materials are year from the date of purchase, Desco products will be free of re-used ESD Bags using test procedures outlined in ANSI/ESD- intentionally added in manufacturing defects in material (parts) and workmanship (labor). S11.11 Surface Resistivity Standard, ANSI/ESD-S11.12 Volume Resistance Measurements of Static Dissipative Planar Materials, this product: lead, mercury, cadmium, Before using and after one year from purchase date, users shall determine the suitability of the Statshield ESD Bags for their and Shielding Materials ANIS/ESD S11.31. hexavalent chromium, polybrominated intended use. Users assume all risk and liability whatsoever in Desco's only obligation shall be to replace such quantity of the biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in connection therewith. Mishandling or improper storage may product proved to be defective. See full Limited Warranty the Directive 2002/95/EC Article 4.1. render an ESD Bag unusable to perform its function. ESD Bags information at www.desco.com/Warranty.aspx. See Desco Industries Inc. letter on- that are ripped, torn, or scratched should be discarded. line at Desco.com.