TM GENESYS PROGRAMMABLE DC POWER
Highest Power Density
Active Power Factor Correction 0.99
Built In RS232/RS485 Interface
Output up to 600V or 200A
Universal Input 85 – 265VAC,
Worldwide Safety Approvals & CE Continuous, Single Phase, 47/63Hz Mark SPECIFICATIONS MECHANICAL (All models 19” rack mount) STANDARD INPUT VOLTAGE RANGE H: 1U; D: 17”(6.7cm) w/o Connectors; Wt. 18lbs (8.2Kg) Universal 85-265 VAC continuous 47/63Hz OUTPUT FEATURES RIPPLE NOISE OUTPUT RATINGS (5Hz - 1MHz) (<20MHz) MODEL Regulation 0.01% + 2mV line & load (cv) NUMBER DC WATTS AMPS mV RMS p-p 0.01% + 2mA line (cc) VOLTS 0.02% + 5mA load (cc) 600 0-100 8 60 GEN 6-100 0-6 1200 0-200 8 60 GEN 6-200 PROTECTIVE FEATURES 720 0-90 8 60 GEN 8-90 0-8 Adjustable OVP, UVL 1440 0-180 8 60 GEN 8-180 Adjustable Current Foldback 750 0-60 8 60 GEN 12.5-60 Over-temperature 0-12.5 1500 0-120 8 60 GEN 12.5-120 Safe/Auto Start 760 0-38 8 60 GEN 20-38 Front Panel Lock 0-20 PROGRAMMING 1520 0-76 8 60 GEN 20-76 750 0-25 8 60 GEN 30-25 0-5V, 0-10V User Selectable via DIP Switch 0-30 1500 0-50 8 60 GEN 30-50 RS232/RS485 Standard 760 0-19 8 60 GEN 40-19 0-40 OPTIONS (Factory Installed) 1520 0-38 8 60 GEN 40-38 Embedded IEEE 488.2 / SCPI Compliant 750 0-12.5 8 60 GEN 60-12.5 0-60 1500 0-25 8 60 GEN 60-25 Program Voltage & Current 760 0-9.5 8 80 GEN 80-9.5 Measure Voltage & Current 0-80 1520 0-19 8 80 GEN 80-19 Overvoltage setting & shutdown 750 0-7.5 8 80 GEN 100-7.5 Current Foldback Setting & Shutdown 0-100 1500 0-15 8 80 GEN 100-15 Labview Drivers available 750 0-5 10 100 GEN 150-5 Isolated Analog Program/Monitor 0-150 1500 0-10 10 100 GEN 150-10 Rear panel operation for harsh electrical 750 0-2.5 25 150 GEN 300-2.5 0-300 environments and series master/slave 1500 0-5 25 150 GEN 300-5 IS510 - 0-5V & 0-10V User Selectable 780 0-1.3 60 300 GEN 600-1.3 0-600 IS420 - 4-20mA 1560 0-2.6 60 300 GEN 600-2.6 Lambda Americas 405 Essex Road Neptune, NJ 07753 Telephone +1 732-922-9300 Fax +1 732-922-1441 Internet http://www.lambda-emi.com Gen 1U0704.doc GENESYS™ FRONT PANEL DESCRIPTION 3 4 5 6 1 2 7,8 1. AC on/off 2. Air intake allows zero stacking for maximum system flexibility and power density 3. Reliable encoder controls output voltage and sets address 4. Digital voltage display shows output voltage and displays OVP, UVL and address settings 5. Digital current display shows output current and also displays baud rate 6. Reliable encoder controls output current and sets baud rate 7. Function/status LED’s
Alarm
Foldback mode
Fine control
Remote mode
Preview settings
Output on 8. Pushbuttons allow flexible user configuration
Coarse and fine voltage and current
Set current foldback adjustment of output
Front Panel Lockout
Preview and change output settings while
Local/remote mode and select address in current mode or with output off and baud rate
Set OVP and UVL limits
Output on/off and safe/auto start mode GENESYS™ REAR PANEL DESCRIPTION 9 6 8 1 2 3 4,5 7 1. Remote/local output voltage sense connections 2. DIP switches select 0-5V or 0-10V programming and other functions 3. DB25 (female) connector allows (non-isolated) analog program and monitor as well as other functions 4. RS485 (out) to other Genesys power supplies 5. RS232/RS485 (in) remote serial programming 6. Output terminals are rugged bus bars for 6-60V output, higher output voltage models have terminal block connector 7. Exit air assures reliable operation when zero stacked 8. Wide-range input 85-265VAC continuous, 47/63Hz with active power factor correction (0.99) AC input connector 750W: IEC320, 1500W: screw terminal model shown 9. Position for optional IEEE 488 (GPIB) shown or isolated analog programming Specifications subject to change without notice Lambda Americas 405 Essex Road Neptune, NJ 07753 Telephone +1 732-922-9300 Fax +1 732-922-1441 Internet http://www.lambda-emi.com Gen 1U0704.doc