ZC - Series ® The Zone Controllers offer extended utility to the DriveRack and ZonePRO fami- lies. The ten Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC ZC-1 ZC-6 Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePRO products. The ZC-2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePRO products. The ZC-3 can ZC-2 ZC-7 function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products. The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro products. The ZC-6 is a programma- ble volume control for the ZonePRO products. The ZC-7 is a programmable push- to-talk page assignment controller for the ZonePRO devices. The ZC-8 provides both programmable source selection and volume control to the ZonePro products. The ZC-9 provides source selection for the ZonePRO 1260 and 1261. The ZC-BOB ZC-3 ZC-8 allows “home run” or parallel wiring to the DriveRack and ZonePro products. The ZC-FIRE is a dedicated fire safety interface for the ZonePRO products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. For more information please visit www.driverack.com or www.dbxpro.com. ZC-9 ZC-4 • Programmable Volume • Programmable Push-To- Control Talk Paging • Program or Scene • Programmable Source Selection Selection • Programmable Contact Closure Interface 8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801) 568-7660 • Up to 1000 ft. on CAT 5 Fax (801) 568-7662 ZC-Fire ZC-BOB Int’l Fax (801) 568-7583 Cable customer@dbxpro.com http://www.dbxpro.com A Harman International Company 18-0180-D 10/04 ZC-Series ® DriveRack and ZonePRO™ Series Wall-Mounted Zone Controllers Using a ZC-BOB: Connections: Up to Six Zone Controllers: 1000 ft. ZC-1, ZC-2, ZC-3, ZC6, ZC-7, ZC-8 and ZC-9 Connectors: (2) RJ-45 Cable: ZC-4 Connectors: (1) RJ-45, (1) 6-pin Phoenix CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000 ft.) nominal DCR ZC-BOB Connectors: (7) RJ-45 and rated VW-1 or higher. ZC-FIRE: (2) RJ-45, (2) 2-pin Phoenix Safety Agency Certifications: Series Wiring: UL 60065, IEC 60065, EN 55013, E60065 Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft. Parallel Wiring: Architects’ and Engineers’ Specifications: ZC-7 ZC-1 The remote device shall provide programmable push-to-talk page assign- The remote device shall provide computer programmable rotary poten- ment for the dbx ZonePro devices. The remote device shall have DIP tiometer volume control for the dbx DriveRack 260, 220i and ZonePro switches allowing identification with connection to the processing device devices. The remote device shall have DIP switches allowing identifica- via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-7 tion with connection to the processing device via CAT 5 cable on RJ-45 remote controller. connectors. The device shall be a dbx ZC-1 remote controller. ZC-8 ZC-2 The remote device shall provide both programmable push-button The remote device shall provide computer programmable rotary poten- up/down volume control, and programmable rotary switch source selec- tiometer and push-button volume control and muting for the dbx tion for the dbx ZonePro devices. The remote device shall have DIP DriveRack 260, 220i and ZonePro devices. The remote device shall have switches allowing identification with connection to the processing device DIP switches allowing identification with connection to the processing via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-8 device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx remote controller. ZC-2 remote controller. ZC-9 ZC-3 The remote device shall provide programmable source selection for the The remote device shall provide programmable rotary switch program ZonePro 1260 and 1261 devices. The remote shall have DIP switches selection for the dbx DriveRack 220i and 260 devices. The remote device allowing identification with connection to the processing device via CAT 5 shall also provide rotary switch programmable source selection, page cable on RJ-45 connectors. The device shall be a dbx ZC-9 remote con- assignment, or scene selection for the dbx ZonePro devices. The remote troller. device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device ZC-BOB shall be a dbx ZC-3 remote controller. The remote device shall provide up to 6 RJ-45 input jacks for “Home Run” or parallel wiring configurations of the dbx ZC wall panel controllers, and ZC-4 one output RJ-45 jack for connection to the dbx DriveRack or ZonePro The remote device shall provide programmable program selection via con- device. The device shall be a dbx ZC-BOB remote controller. tact closures for the dbx DriveRack 220i and 260 devices. The remote device shall also provide contact closure programmable source selection, ZC-FIRE page assignment, or scene selection for the dbx ZonePro devices. The The remote device shall provide either output muting or programmable remote device shall have DIP switches allowing identification with connec- scene selection for the dbx ZonePro devices. Connection to the fire safety tion to the processing device via CAT 5 cable on RJ-45 connectors. The system shall be either through a relay or directly to the control voltage device shall be a dbx ZC-4 remote controller. output. The remote device shall have DIP switches allowing identifica- tion with connection to the processing device via CAT 5 cable on RJ-45 ZC-6 connectors. The device shall be a dbx ZC-FIRE remote controller. The remote device shall provide computer programmable push-button up/down volume control for the dbx ZonePro devices. The remote device shall have DIP switches allowing identification with connection to the pro- cessing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-6 remote controller. FOR MORE INFORMATION CONTACT: dbx engineers are constantly working to improve the quality of our products. dbx Professional Products Specifications are, therefore subject to change without notice. 8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801) 568-7660 Fax (801) 568-7662 customer@dbxpro.com http://www.dbxpro.com ™ The Professional’s Choice In Signal Processing A Harman International Company