Signal Processors dbxpro.com SC 64 DIGITAL MATRIX PROCESSOR H D OPTION SLOT 2 ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR UL60065 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 IEC60065 SC 64 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC G C SHOCK DO NOT EXPOSE THIS FUSE REPLACEMENT RATINGS EQUIPMENT TO RAIN OR 100V-240V T 2.5A, H 250V MOISTURE 120V~,60Hz OPTION SLOT 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 ETHERNET RS-232 ZC INPUTS 1 - 6 F B 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 CONTROL INPUTS RELAY OPTO LOGIC OUTPUTS E A 120 WATTS 100-240V 50/60Hz C C 1 2 3 4 5 6 7 8 R R NO C NC + - C 1 2 3 4 5 6 ZC INPUTS 7 - 12 O VER VIEW : ® Based on the principles of the dbx ZonePRO products, the SC 64 Digital Matrix Processor is the new flagship product for Digital Matrix Processing. Wizard driven configuration using HiQnet System Architect makes unprecedented DSP power, incredible routing flexibility and a rich palette of processing tools accessible with the minimum of training. The SC 64 represents the professional choice of foundation on which to build even the most demanding integrated system. The SC 64 has a total analog I/O count of 64, configurable in banks of eight. Analog input cards and analog output cards facilitate nine different fully loaded configurations. Analog input cards accommodate a wide range of sources with mic/line switching and phantom power per input. Two high-speed options slots provide facility for adding forthcoming high bandwidth audio transport I/O cards. The Media Engine factory option allows for flash-based, multi- channel playback of stored media. All of these features are housed in a sleek 2U rack chassis. With dedicated DSP for common processing functions and insert positions for specialized processing, the SC 64 offers many processing functions including Advanced Feedback Suppression (AFS), Ambient Noise Compensation (ANC), priority ducking, parametric equalization (PEQ), delay and dynamics. The SC 64 has a diverse range of control options ™ including HiQnet System Architect custom control panels, Ethernet, serial, contact closure, the popular ZC wall controllers and even automatically scheduled events. With so many methods of control, an SC system can truly be tailored to suit the needs and technical expertise of even the most scrutinizing contractor. KEy FEatuRES: 9 64 channels of analog I/O 9 Wizard configuration 9 Complete routing flexibility configurable in banks of 8 9 Selectable DSP inserts on all inputs 9 Comprehensive configuration, 9 Mic / Line and Phantom Power per and outputs including Advanced control and monitoring from channel on Analog Input Cards 9 Feedback Suppression (AFS) HiQnet System Architect 9 Ethernet / Serial Control 9 Automatic Gain Compensation 9 Events Scheduler 9 Logic I/O (AGC), Compression, De-Essing and 9 Optional ZC wall panel control 9 Rich Palette of Processing Tools Notch Parametric Equalization 9 Optional Media Engine Page 1 of 2 dbx Professional Products | 8760 S. Sandy Parkway | Sandy, UT 84070 U.S.A | Ph. +1 - 801-568-7660 | Fax +1 - 801-566-7662 INPUTS / OUTPUTS 18-XXXX dbxpro.com Signal Processors SC 64 Digital Matrix Processor tEchnIc al SPEcIFIc atIOnS: Front Panel led Indicators: Per Input: Signal Present, Clip, 48V Phantom Power, SYNC, I/O card type (IN, OUT, D-IN, D-OUT) Other: LCD Display, Page Button, Select Button and LED indicators for: Global CLIP, Link/Active, RS-232 and Power card Slots: Audio Cards: 8 Card Slots (A, B, C, D, E, F, G, H) High Speed Option Slot: 2 Card Slots analog Inputs: (8) per Input Card Connectors: Phoenix/Combicon, 3.5mm pitch Mic/Line Inputs: Nominal gain 0 dB, Electronically switchable to +6, +12, +18, +24, +30, +36,+42, +48 dB Type: Electronically balanced, RF filtered Impedance: 3.5 k Ω Maximum Input Level: +20 dBu CMRR: >40 dB typical, >50 dB at 1 kHz Phantom Power: +48 VDC, selectable per input analog Outputs: (8) per Output Card Connectors: Phoenix/Combicon, 3.5mm pitch Type: Electronically balanced, RF filtered Impedance: 44 Ω Max Output Level: +20 dBu System Performance: Dynamic Range: 107 dB unweighted, 110 dB A-weighted Internal Processing: 32 bit floating point THD + Noise: 0.0045% typical at 0 dBu, 1 kHz, 0 dB input gain Frequency Response: 20 Hz- 20 kHz, +/-0.50 dB Sample Rate: 48 kHz GPIO Ports: 8 Control Inputs and 6 Logic Outputs (Phoenix/Combicon, 3.5mm pitch) Control Input Voltage: 0 to 4.5v Control Input Impedance: 4.7 k ohm to +5V (2-wire mode) Logic Output Voltage: 0 or +5V unloaded Logic Output Impedance: 440 ohm Logic Output Current: 10mA source, 60mA sink Relay contact closure: Connector: Phoenix/Combicon, 3.5mm pitch Contacts: Common (C), Normally Open (NO), Normally Closed (NC) Contact Rated Load: 0.3A at 125VAC, 1A at 30VDC Watchdog Output: Phoenix/Combicon, 3.5mm pitch for failsafe control Opto-isolated Output Current: 14mA maximum Withstanding Voltage: 80V maximum (Off) Series Impedance: 220Ω (isolated) Input Signal Processing per channel Delay: Up to 5120ms of input delay EQ: 4-Band Parametric Gate: Downward Expander Insert Processing: Two selectable Input Processing blocks per input Insert Types: Advanced Feedback Suppression, Automatic Gain Control, Compressor, De-Esser, 12-Band Notch EQ, 12-Band Parametric EQ, Sub-Harmonic Synthesizer Ducker: 24 level priority ducker Routing/Mixing: 24x1 mixer per output channel Output Signal Processing per channel: Insert Processing: One selectable Output Processing block per output. Insert Types: Gain, Automatic Gain Control, Ambient Noise Compensation, Auto-Warmth™ Crossover Configurations: 1x1, 1x2, 1x3, 1x4 Crossover Types: Bessel 6, 12, 18 and 24 dB/Octave, Butterworth 6, 12, 18 and 24 dB/Octave, Linkwitz-Riley 12 and 24 dB/Octave EQ: 6-Band Parametric Limiter: dbx PeakStopPlus™ Delay: Up to 5120ms of output delay Miscellaneous: Control: Ethernet, RS-232, Optional dbx ZC Wall Panels Power Requirements: 100V to 240VAC 50/60Hz, 120 Watts Dimensions (H(U) x W x D): 3.5" (2U) x 19" x 15" (89mm x 483mm x 381mm) Weight: 18.9 lbs. / 8.57 kgs. (with all audio cards installed) Page 2 of 2 dbx Professional Products | 8760 S. Sandy Parkway | Sandy, UT 84070 U.S.A | Ph. +1 - 801-568-7660 | Fax +1 - 801-566-7662