Rugged HF Transceiver RT7000 The RT7000 is a rugged, 1.6 to 30 MHz, HF/SSB transceiver designed to • Rugged 125W HF transceiver provide long distance voice and data communications. The RF output power is rated at 125W, PEP, and 100W, average, and there is complete • Mobile and fixed station protection against antenna mismatch. Modes include USB, LSB, CW, and AME; and up to 1000 preset memory channels are available. A wide variety • Continuous duty operation – of mobile and base station system configurations are offered with RF power levels up to 5000W that include desktop and rack-mounted systems voice & data with remote control and broadband or narrowband antenna systems. • MIL-STD-188-141B ALE Table 1 shows the basic transceivers available in the RT7000 family. All models are available in either +12Vdc or +28Vdc for use in any type of vehicle; all are fully protected against input power disturbances. • Voice encryption The radios are waterproof and ruggedly built to meet the environmental specifications in MIL-STD-810D, E, and F for operation in harsh envi- • Remote & extended control capability ronments. The radios now include as standard a DSP-based voice enhancement module to enhance the received voice quality. Automatic • Core of high-power systems BITE capability, with fault detection down to the module level, also is standard in all RT7000’s. BITE status messages are shown on the display to allow even unskilled operators to easily repair the radio at the field level. • B.I.T.E. capability Table 2 shows the internal options available for the RT7000 transceivers. • Separate receivers and For automatic selection of best channel and station-to-station linking, the RT7000 offers MIL-STD-188-141B automatic link establishment (ALE). transmitters available Voice encryption, impulse noise blanking, and special data and CW filters are other embedded features that can easily be added to the • MIL-STD-810 tested standard transceiver. A complete line of accessories are available for the RT7000 including RF booster amplifiers, antenna tuners, high-speed modems, rugged notebook computers, and HF E-mail and network management application software to provide comprehensive HF communications solutions. A variety of remote control options are offered including extended front panel control, long–range remote control, high-speed remote control, and computer control. Table 3 lists the accessory products that are available with the RT7000 family. www.dtwc.com +1-760-597-1500 3030 Enterprise Court, Vista, CA 92081 USA Table 1: RT7000 Transceiver Models The basic RT7000 can also be remotely controlled to provide a transceiver with both local (front panel) and remote control capability. (+12VDC oR +28VDC InPUT PoWER AS InDICATED) TRAnSCEIVER MoDELS Description RT7000-12 or RT7000-28 1.6 to 30 MHz HF transceiver with full-function front panel. RT7000E-12 or RT7000E-28 Transceiver with blank front panel designed for extended (up to 50 ft.) control from RT7201E control console. RT7000RF-12 or RT7000RF-28 Transceiver with blank front panel designed for long-range remote control from RT7201F FSK-based control console. Includes internal 7000RF modem. RT7000RI-12 or RT7000RI-28 Transceiver with blank front panel designed for up to 2 kM remote control from RT7201I high-speed control console. Includes internal 7000RI modem. RT7000C-12 or RT7000C-28 Transceiver with blank front panel designed for computer-only control from external PC. RT7000RX-12 or RT7000RX-28 Receiver-only model of RT7000. 100 kHz to 30 MHz RT7000TX-12 or RT7000TX-28 Transmitter-only version of RT7000. 1.6 to 30 Mhz Table 2: RT7000 Internal options InTERnAL oPTIonS P/n Description MIL-STD-188-141B 7000ALE-141B ALE compliant to MIL-STD-188-141B FED-STD-1045A ALE 7000ALE ALE compatible to FED-STD-1045A DSP VoICE EnHAnCEMEnT 7000VEM Voice enhancement module using special DSP algorithms to enhance speech processing MEMoRy CHAnnEL 7000ACH Provides up to 1000 preset EXPAnSIon memory channels HIgH STABILITy 7000HS Provides 0.1 ppm frequency stability VoICE EnCRyPTIon 7000EnCR High-level embedded voice encryption noISE BLAnKER 7000nB Impulse-type noise blanker CoM PoRT PRoToCoL 7000RS RS422/423/485 protocol for 2nd CoM port WIDEBAnD DATA FILTER 7000WB1 300-3300 kHz wideband data filter CW FILTER 7000CW narrowband CW filter FSK REMoTE 7000RF FSK modem for “RF” remote ConTRoL MoDEM control radios (RT7000RF) HIgH-SPEED REMoTE 7000RI High-speed modem for “RI” ConTRoL MoDEM remote control radios (RT7000RI) Table 3: RT7000 Major Accessory Equipment In addition to the items shown below, a line of mounts, audio accessories, cables, spares, and miscellaneous interface devices are available. Please consult Datron for detailed specifications. ACCESSoRy Description RF AMPLIFIERS RA400 1.6 - 30 MHz, 400 W, voice & data RF Amplifier; waterproof, +28Vdc; vehicle or base station usage RA500D 1.6 - 30 MHz, 500W, voice & data RF Amplifier with internal ac/dc supply (rack mounting) RA1000D 1.6 - 30 MHz, 1 kW, voice & data RF Amplifier with internal ac/dc supply (rack mounting); 220Vac Full-function remote control options available for the RT7000 include an extended DATA EqUIPMEnT control unit (RT7201E) for short distance RT5300 High-speed external HF data modem (up to 50 feet) operation, and remote control (up to 3000 bps) with ARq units (RT7201RI or RT7201RF) for longer E110A MIL-STD-188-110A/B high-speed HF data modem (PCI Card, for embedding in a desktop PC) range using either high-speed direct 2-wire DT9400 Rugged notebook computer link (2 km range) or FSK tones (long range) DT5300C Rugged notebook computer with embedded over a voice-grade 2-wire line. The RT7000 5300-series HF modem is also capable of full computer control DT110 Rugged notebook computer with embedded (RT7000C) from a PC. Both “remote-only” MIL-STD-188-110A/B HF modem and “local-remote” configurations are available. The former uses a blank front AnTEnnA TUnERS RAT7000B Waterproof, 125W, automatic 1.6 - 30 MHz tuner panel, while the latter has the normal with 100 memory channels full-function front panel to allow multiple RAT1000C Waterproof, 1 kW, automatic 1.6 - 30 MHz tuner control points. with 100 memory channels AnTEnnAS RA-MAS 16 ft., 4-section, narrowband MIL whip antenna for mobile mounting RA-PAS 32 ft., 8-section, narrowband MIL whip antenna for base station use MAR-12 12 ft., narrowband whip antenna with spring base for mobile mounting MAR-16 16 ft., narrowband whip antenna with spring base for mobile mounting MAR-16T 16 ft., narrowband whip antenna with ratcheted base for mobile mounting, for nVIS when tilted ABB100An Broadband 2 - 30 MHz, 150W antenna for base station use ABB1000An Broadband 2 - 30 MHz, 1kW antenna for base station use PoWER SUPPLIES UPF7000A-12 or Heavy-duty switch-mode power supplies for the UPF7000A-28 RT7000; 110Vac input UPF7000A-12-220 or Heavy-duty switch-mode power supplies for the UPF7000A-28-220 RT7000; 220Vac input www.dtwc.com Rugged HF Transceiver RT7000 gEnERAL • FREqUEnCy RAngE 1.6 to 30 MHz (Tx); 100 kHz to 30 MHz (Rx); 10 Hz channel spacing • PRESET CHAnnELS 256, standard; 1000, optional • SCAnnIng Multiple scan groups, operator-selectable scan rates • CHAnnEL PRogRAMMIng From front panel or remotely via computer or dedicated remote control console • FREqUEnCy STABILITy 0.5 ppm • MoDES USB, LSB, CW, AME; simplex or half-duplex • InPUT PoWER REqUIREMEnTS 11 - 16 Vdc (+12Vdc models); 20-32Vdc (+28Vdc models) • InPUT PoWER PRoTECTIon Reverse polarity, transient and under/over-voltage • AnTEnnA PoRT 50 ohms, type n connector • AnTEnnAS 50 ohms broadband or narrowband with antenna tuner (RAT7000B, RAT1000C) Datron World Communications, Inc. • InTERFACE Control: two CoM ports - RS232; optional EIA RS422/423/485 CoM2 port available Audio: 600 ohms, balanced and isolated. 3030 Enterprise Ct. Vista, CA, USA 92081 MECHAnICAL, EnVIRonMEnTAL • SIzE 6” x 14” x 18” (H x W x D) • WEIgHT 35 lbs. Tel: +1-760-597-1500 • CooLIng Rear panel heatsink; RT7000FAn-1 Fan Kit (optional) - recommended for continuous duty or Fax: +1-760-597-1510 any data mode operation • IMMERSIon To 1 meter E-mail: sales@dtwc.com • TEMPERATURE -30 to +60 degrees C., operating • SHoCK, VIBRATIon, HUMIDITy, Per MIL-STD-810D, MIL-STD-810E, and MIL-STD-810F Web: http://www.dtwc.com FUngUS, SAnD & DUST TRAnSMITTER • RF PoWER oUTPUT 125W, PEP; 100W, average; programmable - 3 levels • DUTy CyCLE Continuous service, all modes • HARMonICS -60 dB (2 to 30 MHz) RECEIVER • SEnSITIVITy -113 dBm @ 10 dB SInAD (2-30 MHz) • ATTEnUAToR +20 dB, operator selectable • AUDIo 5W into 4 ohms; 0 dBm into 600 ohms. * Subject to export regulations Specifications subject to change without notice - rev 0209 Datron is an ISo 90012000 Certified Company Made in the USA www.dtwc.com