7773_Data sheet T51pro 3/5/07 16:48 Page 1 Dataman T51Pro www.dataman.com • 40 pin ZIF socket accepts both 300/600 mil DIP devices up to 40 pin • Advanced pin drivers allow varying voltages The Dataman T51Pro is a PC based 40-pin MCS51 and AVR programmer to be applied to any with ISP capabilities and USB 2.0 connectivity. The T51Pro is built to meet the demands of development labs and field engineers for pin delivering signals specialized programming. without overshoot, increasing Dataman T51Pro is a small, fast and powerful programmer supporting a programming yield huge range of programmable MCS51 and AVR devices. Using the in-circuit serial programming connector (ISP), the programmer is able • Pin drivers operate to program ISP capable chips. down to 1.8V so you'll be ready to program Hardware: the full range of General • 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of the socket. tomorrow’s advanced Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or low-voltage devices ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices • USB 2.0/1.1 • The programmer performs device insertion tests and contact checks before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error connectivity allowing • T51Pro programmer performs programming verifications at the marginal level of supply voltage, which improves programming yield, and guarantees long data retention fast and easy • Easily upgradeable to the 40Pro programmer connection to PC’s and • Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) laptops and other packages • Upgradeable to 40Pro Base unit (DAC) • Two D/A converters for VCCP and VPP, controllable rise and fall time programmer • VCCP range 2V..7V/350mA • VPP range 2V..25V/200mA • USB 2.0/1.1 compatible interface • Auto calibration • Self test capability 7773_Data sheet T51pro 3/5/07 16:48 Page 2 ZIF socket pindriver Programmer (ZIF socket) • 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices • Microcontrollers MCS51 series: 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, LPC up to 40-pins series from Atmel, Atmel W&M, Intel, Philips, SST, Winbond, ... 8-40 pins • Pindrivers: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver for MCS51 • Microcontrollers Atmel AVR: ATtiny, AT90Sxxx, ATmega series (parallel and and AVR devices serial mode), 8-40 pins • Spare GND, VCC and VPP driver, which add additional made-by-wire • Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx series GND/VCC/VPP pin capability for future devices • FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver Programmer (ISP connector) pins; level H selectable from 1.8V up to 5V • Microcontrollers Atmel: AT89Sxxx, AT90Sxxxx, ATtiny, ATmega series • Continuity test: each pin is tested before every programming operation • Microcontrollers Philips: LPC series ISP connector Package Includes: • 10-pin male type with miss insertion lock Dataman MCS51 / AVR ISP Programmer • 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable • Dimensions: 160x95x35 mm (6.3x3.7x1.4 inches) from 1.8V up to 5V to handle all (low-voltage including) devices • Weight: 500g (17.65 oz) • 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA) • Programmed chip voltage (VCCP) with both source/sink capability and Switching Power Supply Adaptor voltage sense • Input: 100-240V @ 50-60Hz & 400mA • Output: 15V @ 0.5A, 7.5W Software: • Moulded USB Cable User Interface • Programmer is driven by an easy-to-use control program with pull-down • ISP cable menus, hot keys and on-line help. Selecting of the device is performed by • Diagnostic POD for self test of the programmer class, manufacturer or simply by typing a fragment of vendor name and/or • Anti-dust cover for ZIF socket part number • User manual • Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), • Software and some special functions (autoincrement) • Optional range of adapters and socket converters also available • All known data formats are supported. Automatic file format detection and conversion during loading of file Warranty and Support: • The rich-featured autoincrement function enables one to assign individual • 30 day money back guarantee* - If you don't like it, send it back serial numbers to each programmed device - or simply increments a serial number. The function also enables one to read serial numbers or any • One year guarantee - One year parts and labour warranty, on the T51Pro programmed device identification signatures from a file device programmer • The software also provides extensive information about programmable • Life-Time Technical Support - T51Pro technical support is available free via devices including detailed drawings of all available packages. The software our website and telephone helpdesk for life also provides explanations of chip labelling (prefixes and suffixes) for each of • Life-Time Software Updates - T51Pro software updates are available free via the supported chips our website for life • The software provides full information for ISP implementation: Description of ISP connector pins for the currently selected chip, recommended target *Applies to orders from UK/US office only design around in-circuit programmed chip and other necessary information • Keeping your programmer software up to date can be a costly business with some programmers. Dataman offers completely FREE software updates whenever you need them. The latest software is always available from our website The Dataman T51Pro supports over 6,000 of the most popular MCS51 and AVR devices in use today - with future devices being added monthly. Dataman T51Pro coverage includes the following device types: www.dataman.com IN THE UK… IN THE US… Available from… Dataman Programmers Ltd. Dataman Inc. Station Road, Maiden Newton 215 East Michigan Avenue Dorset DT2 0AE, UK Orange City, Florida 32763 USA Tel (01300) 320719 Tel (386) 774-7785 Fax (01300) 321012 Fax (386) 774-7796