7773_Data sheet Pik Pro 3/5/07 16:49 Page 1 Dataman PIKPro www.dataman.com • 40 pin ZIF socket accepts both 300/600 mil DIP devices up to 40 pin • Advanced pin drivers allow varying voltages The Dataman PIKPro is a PC based 40-pin PICmicro series programmer to be applied to any with ISP capabilities and USB 2.0 connectivity. The PIKPro is built to meet the demands of development labs and field engineers for pin delivering signals specialized programming. without overshoot, increasing Dataman PIKPro is a small, fast and powerful programmer supporting a programming yield huge range of programmable PICmicro devices. Using the in-circuit serial programming connector (ISP), the programmer is able to program • Pin drivers operate ISP capable chips. down to 1.8V so you'll be ready to program Hardware: the full range of General • 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of the socket. tomorrow’s advanced Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or low-voltage devices ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices • USB 2.0/1.1 • The programmer performs device insertion tests and contact checks before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error connectivity allowing • PIKPro programmer performs programming verifications at the marginal level of supply voltage, which improves programming yield, and guarantees long data retention fast and easy • Easily upgradeable to the 40Pro programmer connection to PC’s and • Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) laptops and other packages • Upgradeable to 40Pro Base unit (DAC) • Two D/A converters for VCCP and VPP, controllable rise and fall time programmer • VCCP range 2V..7V/350mA • VPP range 2V..25V/200mA • USB 2.0/1.1 compatible interface • Auto calibration • Self test capability 7773_Data sheet Pik Pro 3/5/07 16:49 Page 2 ZIF socket pindriver Programmer (ZIF socket) • 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices • Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC14xxx, PIC16xxx, up to 40-pins PIC17xxx, PIC18xxx, dsPIC series, 8 to 40 pins • Pindrivers: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver for PICmicro • Serial E(E)PROM: 17Cxxx, 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx devices series • Spare GND, VCC and VPP driver, which add additional made-by-wire Programmer (ISP connector) GND/VCC/VPP pin capability for future devices • Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, • FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver PIC18xxx, dsPIC series pins; level H selectable from 1.8V up to 5V • Continuity test: each pin is tested before every programming operation Package Includes: Dataman PIKPro PICmicro ISP Programmer ISP connector • Dimensions: 160x95x35 mm (6.3x3.7x1.4 inches) • 10-pin male type with miss insertion lock • Weight: 500g (17.65 oz) • 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices Switching Power Supply Adaptor • 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range • Input: 100-240V @ 50-60Hz & 400mA 2V..25V/50mA) • Output: 15V @ 0.5A, 7.5W • Programmed chip voltage (VCCP) with both source/sink capability and voltage sense • Moulded USB Cable • ISP cable Software: • Diagnostic POD for self test of the programmer User Interface • Anti-dust cover for ZIF socket • Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selecting of the device is performed by • User manual class, manufacturer or simply by typing a fragment of vendor name and/or • Software part number • Optional range of adapters and socket converters also available • Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement) Warranty and Support: • All known data formats are supported. Automatic file format detection and • 30 day money back guarantee* - If you don't like it, send it back conversion during loading of file • One year guarantee - One year parts and labour warranty, on the PIKPro • The rich-featured autoincrement function enables one to assign individual device programmer serial numbers to each programmed device - or simply increments a serial • Life-Time Technical Support - PIKPro technical support is available free via number. The function also enables one to read serial numbers or any our website and telephone helpdesk for life programmed device identification signatures from a file • Life-Time Software Updates - PIKPro software updates are available free via • The software also provides extensive information about programmable our website for life devices including detailed drawings of all available packages. The software also provides explanations of chip labelling (prefixes and suffixes) for each of the supported chips *Applies to orders from UK/US office only • The software provides full information for ISP implementation: Description of ISP connector pins for the currently selected chip, recommended target design around in-circuit programmed chip and other necessary information • Keeping your programmer software up to date can be a costly business with some programmers. Dataman offers completely FREE software updates whenever you need them. The latest software is always available from our website The Dataman PIKPro supports over 6,000 of the most popular PICmicro devices in use today - with future devices being added monthly. Dataman PIKPro coverage includes the following device types: www.dataman.com IN THE UK… IN THE US… Available from… Dataman Programmers Ltd. Dataman Inc. Station Road, Maiden Newton 215 East Michigan Avenue Dorset DT2 0AE, UK Orange City, Florida 32763 USA Tel (01300) 320719 Tel (386) 774-7785 Fax (01300) 321012 Fax (386) 774-7796