DS6300 ACR4™ Configuration technology Sw Tool APPLICATIONS ADVANTAGeS • Automated warehousing • Extended reading range from 250 to 2000 mm thanks to the • Reading on forklift trucks “2-step” mechanically adjustable focus system • Picking systems • DIGITECH™ technology permits full software control over • Automated shop floor signal processing parameters. Scanner setup can therefore be optimized simply loading optimized software recipes, thus enabling excellent performance in all reading conditions • ACR4™ reconstruction technology increases the maximum tilt angle and overall read rate on damaged barcodes • Available with integrated software programmable Oscillating Mirror and built-in connectivity to Ethernet, Profibus and DeviceNet • Easy and simple configuration thanks to Genius™ multi- language software tool 44 www.automation.datalogic.com Industrial Bar Code Scanners hIGhLIGhTS GeNeRAL DeSCRIPTION • Good reading performance on very low DS6300 scanner is designed to offer a complete modular solution in terms of contrast bar codes reading performance, built-in connectivity, ease of use and maintenance. With • Focus adjustable optics DS6300, Datalogic Automation provides mid-range industrial bar code readers • Reading range from 250 to 2000mm with top class performance. • ACR4™ reconstruction technology DS6300 is therefore the optimal solution for a wide range of manufacturing improves reading of damaged barcodes applications both in the automated shop floor and in the automated • DIGITECH™ technology enables warehousing. excellent reading performance DS6300 features a practical display with keyboard that increases the scanner’s • Linear and integrated Oscillating Mirror ease of use by showing barcode data read (local echo), statistics and diagnostic versions information. Moreover, it offers built-in connectivity to Ethernet, DeviceNet and • Built-in connectivity to Ethernet / Profibus networks. Profibus / DeviceNet • Display and keyboard for scanner monitoring and diagnostics 45 DS6300 ReADING DIAGRAMS DS6300-100-0XX DS6300-100-0XX Resolution: 0.20 mm/8 mils Resolution: 0.30 mm/12 mils CONDITIONS CONDITIONS Code = Interleaved 2/5 or Code 39 Code = Interleaved 2/5 or Code 39 PCS = 0.90 PCS = 0.90 Pitch angle = 0° Pitch angle = 0° Skew angle = 10° - 20° Skew angle = 10° - 20° Tilt angle = 0° Tilt angle = 0° DS6300-100-0XX DS6300-100-0XX Resolution: 0.38 mm/15 mils Resolution: 0.50 mm/20 mils 0 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 (in) 0 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 (cm) 16 40 14 35 30 12 Focus 10 25 Position = 0 8 20 6 15 4 10 Focus 2 5 Position = 100 0 0 -5 -2 -10 -4 -15 -6 -8 -20 -10 -25 Focus Position = 60 -12 -30 -35 -14 -40 -16 (in) (cm) CONDITIONS CONDITIONS Code = Interleaved 2/5 or Code 39 Code = Interleaved 2/5 or Code 39 PCS = 0.90 PCS = 0.90 Pitch angle = 0° Pitch angle = 0° Skew angle = 10° - 20° Skew angle = 10° - 20° Tilt angle = 0° Tilt angle = 0° 46 www.automation.datalogic.com ReADING DIAGRAMS DS6300-105-0XX (Oscillating Mirror) DS6300-105-0XX (Oscillating Mirror) Resolution: 0.20 mm/8 mils Resolution: 0.30 mm/12 mils CONDITIONS CONDITIONS Code = Interleaved 2/5 or Code 39 Code = Interleaved 2/5 or Code 39 PCS = 0.90 PCS = 0.90 Pitch angle = 0° Pitch angle = 0° Skew angle = 10° - 20° Skew angle = 10° - 20° Tilt angle = 0 Tilt angle = 0° DS6300-105-0XX (Oscillating Mirror) DS6300-105-0XX (Oscillating Mirror) Resolution: 0.38 mm/15 mils Resolution: 0.50 mm/20 mils CONDITIONS CONDITIONS Code = Interleaved 2/5 or Code 39 Code = Interleaved 2/5 or Code 39 PCS = 0.90 PCS = 0.90 Pitch angle = 0° Pitch angle = 0° Skew angle = 10° - 20° Skew angle = 10° - 20° Tilt angle = 0° Tilt angle = 0° 47 DS6300 DIMeNSIONS OSCILLATING MIRROR VeRSION OSCILLATING MIRROR VeRSION mm / inch 48 www.automation.datalogic.com eLeCTRICAL CONNeCTIONS All the connectors available for each DS6300 model are the following: SCANNeR MODeL CONNeCTORS 25-pin male serial interface and I/O connector Master/Slave 9-pin male Lonworks connector* 9-pin female Lonworks connector 26-pin male serial interface and I/O connector Ethernet 9-pin female Lonworks connector RJ45 modular connector The DS6300 Master/Slave models are equipped with a 25-pin male D-sub connector for connection to the host computer, power supply and input/output signals. The DS6300 Ethernet models adopt a 26-pin male connector instead of the 25-pin one. 26-pin Connector 25-pin Connector 25-PIN D-SUB MALe CONNeCTOR PINOUT Pin Name Function Chassis - internally connected to GND 1 CHASSIS Cable connected to chassis 20 RXAUX Receive data of auxiliary RS232 (referred to GND) 21 TXAUX Transmit data of auxiliary RS232 (referred to GND) 8 OUT 1+ Configurable digital output 1 - positive pin 22 OUT 1- Configurable digital output 1 - negative pin 11 OUT 2+ Configurable digital output 2 - positive pin 12 OUT 2- Configurable digital output 2 - negative pin 16 OUT 3A Configurable digital output 3 - polarity insensitive 17 OUT 3B Configurable digital output 3 - polarity insensitive 18 EXT_TRIG/PS A External trigger (polarity insensitive) for PS 19 EXT_TRIG/PS B External trigger (polarity insensitive) for PS 6 IN 2/ENC A Input signal 2 (polarity insensitive) for Encoder 10 IN 2/ENC B Input signal 2 (polarity insensitive) for Encoder 14 IN 3A Input signal 3 (polarity insensitive) 15 IN 4A Input signal 4 (polarity insensitive) 24 IN_REF Common reference of IN3 and IN4 (polarity insensitive) 9,13 VS Supply voltage - positive pin 23,25,26 GND Supply voltage - negative pin Pin RS232 RS232 RS485 Full-Duplex RS485 half-Duplex 2 TX TX485 + RTX485 + 3 RX * RX485 + Main Interface Signals 4 RTS TX485 - RTX485 - (SW Selectable) 5 CTS * RX485 - 7 GND_ISO GND_ISO GND_ISO * Do not leave floating, see DS6300 Reference Manual for connection details. 49 DS6300 eLeCTRICAL CONNeCTIONS Female (all models) Male (Master/Slave model) 9-pin Local Lonworks Connectors 9-pin Local Lonworks Connectors 9-PIN LONwORkS CONNeCTOR PINOUT Pin Name Function 1 CHASSIS Cable shield internally connected by capacitor to chassis 2 GND Supply voltage - positive pin 6 VS_I/O Supply voltage - negative pin 3 REF_I/O Supply voltage of I/O circuit 4 SYS_ENC_I/O Reference voltage of I/O circuit 5 SYS_I/O System signal 7 LON A System signal 8 LON B Lonworks line (polarity insensitive) In DS6300 Ethernet models a RJ45 Modular Jack is provided for Ethernet connection. This interface and the connector pinout are IEEE 802.3 10 BaseT and IEEE 802.3u 100 BaseTX compliant. RJ45 Modular Jack RJ45 MODULAR JACk PINOUT Pin Name Function 1 TX + Transmitted data (+) 2 TX - Transmitted data (-) 3 RX + Received data (+) 6 RX - Received data (-) 4,5,7,8 NC Not connected 50 www.automation.datalogic.com MODeLS AND ACCeSSORIeS MODeLS Order No. Description 931351010 DS6300-100-010 ADJ FOCUS, LINEAR, M/S 931351020 DS6300-100-011 ADJ FOCUS, LINEAR, PROFIBUS 931351030 DS6300-100-012 ADJ FOCUS, LINEAR, ETHERNET 931351040 DS6300-100-015 ADJ FOCUS, LINEAR, DEVICENET 931351060 DS6300-105-010 ADJ FOCUS, OSC. MIRROR, M/S 931351070 DS6300-105-011 ADJ FOCUS, OSC. MIRROR, PROFIBUS 931351080 DS6300-105-012 ADJ FOCUS, OSC. MIRROR, ETHERNET 931351090 DS6300-105-015 ADJ FOCUS, OSC. MIRROR, DEVICENET ACCeSSORIeS Order No. Description 93A201100 GFC-60 90° MIRROR 93A201102 GFC-600 90° MIRROR CLOSE DISTANCE 93ACC1730 GFX-60 X-PATTERN MIRROR 93ACC1721 FBK-6000 FAST BRACKET KIT (2 PCS) TeChNICAL DATA DS6300-100-01X DS6300-105-01X DIMENSIONS 110 x 113 x 99 mm (4.33 x 4.45 x 3.9 in) 113 x 180 x 104.5 mm (4.45 x 7.08 x 4.11 in) WEIGHT 1.5 kg. (3.3 lb) 2.0 kg. (4.4 lb) CASE MATERIAL Aluminum OPERATING TEMPERATURE 0 to 40 °C (32 to 104 °F), STORAGE TEMPERATURE -20 to 70 °C (-4 to 158 °F) HUMIDITY 90% non condensing VIBRATION RESISTANCE IEC 68-2-6 test FC 1.5mm; 10 to 55 Hz; 2 hours on each axis SHOCK RESISTANCE IEC 68-2-27 test EA 30 G; 11 ms; 3 shocks on each axis PROTECTION CLASS IP64 for standard models; IP65 on request LIGHT SOURCE Visible laser diode (630 to 680 nm) SCANNING SPEED 600 to 1200 scan/s SW programmable RESOLUTION Down to 0.20 mm (8 mils) READABLE SYMBOLOGIES Code 2/5, Code39, Code93, Code128, EAN/UPC, EAN128, Codabar, Pharmacode, ISBN128 MULTILABEL READING Up to 10 different symbologies during the same reading phase Main Port: RS232/RS485 up to 115.2 Kbit/s COMMUNICATION INTERFACES Auxiliary Port: RS232 up to 115.2 Kbit/s OTHER AVAILABLE INTERFACES Lonworks (Master/Slave), Ethernet, Profibus, DeviceNet DIGITAL INPUTS Four SW programmable, optocoupled, NPN/PNP DIGITAL OUTPUTS Three SW programmable, optocoupled, event driven DISPLAY & KEYPAD LCD 16 x 2 characters & 3 keys LED INDICATORS Power On, Phase On, Data Tx Windows™ based SW (Genius™) via serial or Ethernet link DEVICE PROGRAMMING Serial Host Mode Programming sequences OPERATING MODES ‘On-line’, ‘Serial On-line’, ‘Automatic’, ‘Continuous’, ‘Test’ LASER CLASSIFICATION Class 2 - EN60825-1; Class II - CDRH LASER CONTROL Safety system to turn laser off in cases of motor slowdown or failure POWER SUPPLY 15 to 30 VDC POWER CONSUMPTION 15 W typical, 20 W max 51