C-Box Line Industrial Connection Box Product Line Unattended Scanning Systems General Description The Datalogic C-Box Line is the ideal solution to simplify and speed up cabling oper- Features ations during the installation of barcode readers. It can be connected to the most > Standardization: unique solution for important fieldbuses in the market. the entire Datalogic scanner range The C-Box line has been designed to be used with the scanners of the 1000, 2000, > Fast installation and maintenance : 4000 and 6000 series and Matrix™, as well as the Gryphon and Dragon hand-held - Ease and flexibility in the cabling readers. operation The C-Box Line is equipped with an internal terminal block made of practical spring - Fast access to the auxiliary clamps and 5 external cable glands for easy cabling operations. Connection to the interface of the product scanner is made through an external standard D-Shell 25 pin connector. All models - Power supply switch and LED have an internal standard D-Shell 9 pin connector to access the auxiliary service Possibility to GET/STORE and SEND the > interface of the scanner. The ease of use is enhanced thanks to an internal switch configuration of the connected products and Led, which control the power supply status, and an external display and keypad > Connectivity to Profibus DP and (C-Box 310/410). DeviceNet System downtime is reduced and scanner replacement is quick because it is possi- Display versions > ble to GET, STORE and SEND the configuration of the connected product directly in > Winhost™ configuration SW the non volatile internal memory of the C-Box 200, 3x0 and 4x0. > Cost Effective The C-Box 300/310 have built-in Profibus DP connectivity, while the C-BOX 400/410 offer built-in connectivity to Devicenet, allowing the reader to be directly connected to the fieldbus with no need for wiring a proprietary intermediate bus. Applications Connection to the fieldbus is fast, with an external standard D-Shell 9 pin connector (Profibus DP) or an external industrial M12 connector (DeviceNet). > Manufacturing > Shop Floor Both the connected products and the fieldbus interfaces can be set through the use Warehousing > of the Winhost™ setup program. www.datalogic.com Unattended Scanning Systems Industrial Connection C-Box Line Box Product Line Specifications C-BOX 100 C-BOX 150 C-BOX 200 C-BOX 300 C-BOX 310 C-BOX 400 C-BOX 410 ELECTRICAL CHARACTERISTICS POWER SUPPLY 10 to 30 Vdc 10 to 30 Vdc 10 to 30 Vdc 10 to 30 Vdc 10 to 30 Vdc POWER CONSUMPTION Max 2.5 W Max 1.4 W Max 3.5 W Max 3 W Max 4.5 W USER INTERFACE LEDS Yes Yes Yes Yes Yes Yes Yes DISPLAY & KEYPAD No No, 3 keys No, 3 keys No, 2 int. keys Yes, 3 keys No, 3 int. keys Yes, 3 keys PHYSICAL CHARACTERISTICS DIMENSIONS See drawing See drawing See drawing See drawing See drawing WEIGHT Approx. 320g Approx. 410g Approx. 340 g Approx. 440 g Approx. 500 g Approx. 470 g Approx. 530 g (11.29 oz) (14.48 oz) (12 oz) (15.51 oz) (17.63 oz) (16.50 oz) (18.70 oz) SOFTWARE FEATURES CONFIGURATION STORAGE Non volatile Non volatile Non volatile internal memory Non volatile internal memory internal memory internal memory CONFIGURATION WINHOST™ WINHOST™ WINHOST™ CONNECTIVITY COMMUNICATION PROTOCOL Multidrop MUX32 Profibus DP Devicenet INTERFACE TYPE RS485 (optocoupled) CAN DATA TRANSFER RATE Up to 56 Kbit/s Up to 12 Mbit/s 125, 250, 500 Kbit/s EXCHANGE MEMORY Up to 32 bytes Up to 32 bytes FOR I/O DATA ADDRESS SETTING HW Switches HW Switches, WINHOST™ HW Switches, WINHOST™ HANDSHAKING Message fragmentation Message fragmentation and flow control and flow control ENVIRONMENTAL FEATURES OPERATING TEMPERATURE -10 to 50° C (14 to 122° F) STORAGE TEMPERATURE -20 to 70° C (-4 to 158° F) HUMIDITY 90% non condensing VIBRATION RESISTANCE IEC 68-2 Test FC 1.5 mm; 10 to 55 Hz; 2 hours on each axis SHOCK RESISTANCE IEC 68-2-27 Test EA 30 G; 11 ms; 3 shocks on each axis PROTECTION CLASS IP64 SCANNERS SUPPORTED The entire The entire DS2100A, DS2400A, DS2100A, DS2400A, DS4600A DS2100A, DS2400A, DS4600A range range* DS4600A, Matrix™ Matrix™ Matrix™ * The 10 to 30 Vdc versions are used for the DS1100 and DS2200 scanners. Matrix™ not supported Dimensions mm inch C-Box 100/150/200 C-Box 300/310 C-Box 400/410