DATALINC SRM6210E
Specifications
Installed Range
Up to 35 miles (56 km), line-of-sight distance using omni directional antennas (extended range capability available)
Output Power
1 Watt maximum (10 programmable steps up to 1 Watt) (+30 dBm)
Rated Range
Up to 25 miles (40 km), line-of-sight distance using omni directional antennas (extended range capability available)
Weight
1.94 lb (.88 kg)
Features
- Factory or field configured for your application—ensuring trouble-free installation
- Front panel LEDs. Power, RF Link, RF In, RF Out, LAN In, LAN Out, LAN Link, LAN Collision, Overrun Error
- PLC slot mount versions also available
- User configurable for Master, Remote, Repeater or Repeater/Remote mode
- Wirelessly connects Ethernet PLCs and workstations
Datasheet
Extracted Text
SRM6210E ETHERNET RADIO MODEM-900 MHZ ISM BAND Data-Linc Group’s SRM6210E Wireless Ethernet Modem offers superior reliability, versatility and performance. The SRM6210E is factory pre- configured for easy, hassle-free installation. It offers an unsurpassed rated range of up to 25 miles (40 km) and an installed range of up to 35 miles (56 km) in optimal conditions with line-of-sight and an omni directional antenna, farther with Repeaters and/or higher gain antennas. Based upon proven technology, the SRM6210E adds flexibility to system design by providing a highly reliable wireless alternative in a compact package. TM The SRM6210E employs Smart Spectrum frequency hopping spread spectrum (FHSS) technology in the 902-928 MHz frequency band for secure, robust FEATURES communication. Data-Linc Group’s FHSS technology, coupled with 32-bit CRC error detection, enables the SRM6210E to reliably deliver critical information. · License-free and wireless—operates in RF site surveys are usually unnecessary and an FCC the 902-928 MHz ISM site license is not required. The SRM6210E wireless (industrial/scientific/medical) band technology eliminates the need for hard wire or fiber · Compact, flexible design with universal cable, which are often expensive and difficult to mounting—back panel or on optional DIN install. rail clip The SRM6210E offers easy to read LEDs and affords · Rated range of up to 25 miles (40 km) and maximum installation flexibility, including optional an installed range of up to 35 miles (56 DIN rail mounting. The SRM6210E can bridge two km) in optimal conditions with line-of- Ethernet segments or connect multiple Ethernet sight and an omni directional antenna— nodes to a Master PLC. The SRM6210E offers a farther with Repeaters or higher gain 10BaseT (UTP) interface to the Ethernet device, uses antennas MAC layer filtering and fully supports most Ethernet · Employs Smart Spectrum™ frequency protocols for true protocol transparency. hopping technology for exceptional data integirty—even in high interference The SRM6210E supports a number of configurations, including point-to-point and point-to-multipoint as environments well as multiple Repeaters if required. Multipoint · Wirelessly connects Ethernet PLCs and operation permits an unlimited number of Remotes. workstations The SRM6210E can also function as a Repeater/ · Factory or field configured for your Remote to extend range or work around application—ensuring trouble-free obstructions. Back-to-back radio modems are not installation required for Repeater function but can be used to · User configurable for Master, Remote, maximize data throughput. Repeater or Repeater/Remote mode · Front panel LEDs. Power, RF Link, RF In, RF Out, LAN In, LAN Out, LAN Link, LAN Collision, Overrun Error · PLC slot mount versions also available WIRELESS ETHERNET MODEM-900MHZ BAND SRM6210E SPECIFICATIONS SRM6210E DIMENSIONS 0.90" Operating Frequency 2.29cm License-free, 902-928 MHz Transmitter 2.00" 3.00" 3.42" Rated Range. Up to 25 miles (40 km), line-of-sight 8.69cm 5.08cm 7.62cm distance using omni directional antennas (extended range capability available) 0.60" Installed Range. Up to 35 miles (56 km), line-of-sight 6.30" 1.52cm 16.00cm distance using omni directional antennas (extended range capability available) DATA-LINC GROUP LAN Power RF Pow 2.45" Output Power. 1 Watt maximum (10 programmable A 2.75" Link B -V +V 10BaseT Radio Configuration Reset/ er In Config Link 6.22cm steps up to 1 Watt) (+30 dBm) 6.99cm Out OE Out Coll In 0.85" Use A or B for LAN Link 10 to 28 VDC Modulation. Spread Spectrum, GFSK 2.16cm Spreading Code. Frequency Hopping 7.50" 3.00" Hop Patterns. 15 (user selectable) 19.05cm 7.62cm Occupied Bandwidth. 230 KHz 8.20" 20.83cm Receiver -6 Sensitivity. -108 dBm @ 10 raw BER TM Selectivity. 40 dB @ fc +/-230 KHz; LINCVIEW DIAGNOSTIC 60 dB @ fc +/-460 KHz SOFTWARE System Gain. 135 dB RF Data Transmission TM Data-Linc Group’s LincView Diagnostic Error Correction. 32 Bit CRC Data Encryption. Substitution Dynamic Key Software provides an optional RF network RF Data Rate. 144 Kbps - 188 Kbps diagnostics management tool for any of the Interface wireless stand-alone modems in the SRM 10BaseT (UTP); one straight, one cross-pinned (only one connector can be used at a time) Family. LincView offers complete system Data Throughput. 108 Kbps maximum in point-to- network monitoring and maintenance from point mode; throughput measured assuming 75% frequency availability your Master location. Key parameters at a Connectors. 10BaseT, DB9 (configuration) remote location can be monitored or changed Antenna Standard thread SMA female with a few simple keystrokes. This allows Supplied bench test antenna technicians to track the actual data path to the Optional external omni directional or yagi antenna Master, view every SRM network link in miles Power Input Voltage Requirements. 10 to 28 VDC; 115 VAC or kilometers and monitor key parameters to 12 VDC wall mounted transformer provided such as signal or noise level, voltage and Connector. Latching screw terminal RF Output Power. 0.1 to 1.0 Watt much more. LincView even provides visual Transmit Current (Peak). 700 mA @ 12 VDC for 1 Watt trend analysis of packet errors, supply voltage Receive Current. 100 mA @ 12 VDC levels and radio temperature. Operating Modes Point-to-point, point-to-multipoint, Store-and-Forward Repeater, Repeater/Remote Configuration. ALLIANCE PARTNERS Serial Port 19.2 Kbaud terminal based Diagnostics Front Panel LEDs. Power, RF Link, RF In, RF Out, LAN In, LAN Out, LAN Link, LAN Collision, Overrun Error Serial Data Port . Stored signal strength, noise and disconnect information TM Optional. LincView Diagnositcs for real-time RF network monitoring Operating Environment o o o o Standard Temperature. -40 to 167 F (-40 to 75 C) Humidity. 0 to 95% non-condensing humidity Enclosure Standard. NEMA 1; 18-gauge steel; 2.45x3.42x6.3 in (6.22x8.69x16 cm) Mounting. Two “L” brackets on either side, rear, top Corporate Headquarters or bottom for panel mounting. Optional DIN rail clip 3535 Factoria Blvd. SE, Suite 100 Tel: (425) 882-2206 Weight. 1.94 lb (.88 kg) Bellevue, WA 98006 USA Fax: (425) 867-0865 info@data-linc.com www.data-linc.com Specifications subject to change without notice. ©2004, Data-Linc Group. All rights reserved. P/N 155-09971-004 rev 9/27 LincView and Smart Spectrum are trademarks of Data-Linc Group. All other trademarks are the property of their respective owners.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the SRM6210E have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods